3D Soft Architectures for Stretchable Thermoelectric Wearables with Electrical Self-Healing and Damage Tolerance.

Flexible thermoelectric devices (TEDs) exhibit adaptability to curved surfaces, holding significant potential for small-scale power generation and thermal management. However, they often compromise stretchability, energy conversion, or robustness, thus limiting their applications. Here, the implementation of 3D soft architectures, multifunctional composites, self-healing liquid metal conductors, and rigid semiconductors is introduced to overcome these challenges.

Green synthesis of iron-doped graphene quantum dots: an efficient nanozyme for glucose sensing.

Single-atom nanozymes with well-defined atomic structures and electronic coordination environments can effectively mimic the functions of natural enzymes. However, the costly and intricate preparation processes have hindered further exploration and application of these single-atom nanozymes. In this study, we presented a synthesis technique for creating Fe-N central single-atom doped graphene quantum dot (FeN/GQDs) nanozymes using a one-step solvothermal process, where individual iron atoms form strong bonds with graphene quantum dots through nitrogen coordination.

Are MXenes suitable for soft multifunctional composites?

MXenes are a family of two-dimensional (2D) nanomaterials known for their high electrical and thermal conductivity, as well as high aspect ratios. Recent research has focused on dispersing MXenes within compliant polymer matrices, aiming to create flexible and stretchable composites that harness MXenes' exceptional conductivity and aspect ratios. Experimental findings demonstrate the potential of MXene polymer composites (MXPCs) as flexible electrical, thermal conductors, and high dielectric materials, with promising applications in soft matter engineered systems.

Thermally Stable Poly(vinylidene fluoride) for High-Performance Printable Piezoelectric Devices.

Piezoelectric polymers, such as poly(vinylidene fluoride) (PVDF) and its copolymers, can achieve large strains and high work density under external electrical fields. These materials are highly desirable in the development of electronic devices and intelligent structures. Here, we demonstrate that dehydrofluorination (DHF) can provide a versatile chemical modification of the PVDF homopolymer that yields thermally stable ferroelectricity.

Liquid metal nanocomposites.

Liquid metal (LM) has attracted tremendous interest over the past decade for its enabling combination of high electrical and thermal conductivity and low mechanical compliance and viscosity. Efforts to harness LM in electronics, robotics, and biomedical applications have largely involved methods to encapsulate the liquid so that it can support functionality without leaking or smearing. In recent years, there has been increasing interest in LM "nanocomposites" in which either liquid metal is mixed with metallic nanoparticles or nanoscale droplets of liquid metal are suspended within a soft polymer matrix.

Soft and Stretchable Thermoelectric Generators Enabled by Liquid Metal Elastomer Composites.

Stretchable thermoelectric generators (TEGs) capable of harvesting electrical energy from body heat under cold weather conditions have the potential to make wearable electronic and robotic systems more lightweight and portable by reducing their dependency on on-board batteries. However, progress depends on the integration of soft conductive materials for robust electrical wiring and thermal management. The use of thermally conductive soft elastomers is especially important for conforming to the body, absorbing body heat, and maintaining a temperature gradient between the two sides of the TEGs in order to generate power.

Solution processable liquid metal nanodroplets by surface-initiated atom transfer radical polymerization.

Eutectic gallium indium (EGaIn) is a liquid metal alloy at room temperature. EGaIn microdroplets can be incorporated into elastomers to fabricate highly stretchable, mechanically robust, soft multifunctional composites with high thermal stability and electrical conductivity that are suitable for applications in soft robotics and self-healing electronics. However, the current methods of preparation rely on mechanical mixing, which may lead to irregularly shaped micrometre-sized droplets and an anisotropic distribution of properties.

A Liquid-Metal-Elastomer Nanocomposite for Stretchable Dielectric Materials.

Stretchable high-dielectric-constant materials are crucial for electronic applications in emerging domains such as wearable computing and soft robotics. While previous efforts have shown promising materials architectures in the form of dielectric nano-/microinclusions embedded in stretchable matrices, the limited mechanical compliance of these materials significantly limits their practical application as soft energy-harvesting/storage transducers and actuators. Here, a class of liquid metal (LM)-elastomer nanocomposites is presented with elastic and dielectric properties that make them uniquely suited for applications in soft-matter engineering.

Printed Nanocomposite Energy Harvesters with Controlled Alignment of Barium Titanate Nanowires.

Piezoelectric nanocomposites are commonly used in the development of self-powered miniaturized electronic devices and sensors. Although the incorporation of one-dimensional (1D) piezoelectric nanomaterials (i.e.

EGaIn-Assisted Room-Temperature Sintering of Silver Nanoparticles for Stretchable, Inkjet-Printed, Thin-Film Electronics.

Coating inkjet-printed traces of silver nanoparticle (AgNP) ink with a thin layer of eutectic gallium indium (EGaIn) increases the electrical conductivity by six-orders of magnitude and significantly improves tolerance to tensile strain. This enhancement is achieved through a room-temperature "sintering" process in which the liquid-phase EGaIn alloy binds the AgNP particles (≈100 nm diameter) to form a continuous conductive trace. Ultrathin and hydrographically transferrable electronics are produced by printing traces with a composition of AgNP-Ga-In on a 5 µm-thick temporary tattoo paper.

Isolation of Aramid Nanofibers for High Strength and Toughness Polymer Nanocomposites.

The development of nanoscale reinforcements that can be used to improve the mechanical properties of a polymer remains a challenge due to the long-standing difficulties with exfoliation and dispersion of existing materials. The dissimilar chemical nature of common nanofillers (e.g.

Barium Titanate Film Interfaces for Hybrid Composite Energy Harvesters.

Energy harvesting utilizing piezoelectric materials has become an attractive approach for converting mechanical energy into electrical power for low-power electronics. Structural composites are ideally suited for energy scavenging due to the large amount of mechanical energy they are subjected to. Here, a multifunctional composite with embedded sensing and energy harvesting is developed by integrating an active interface into carbon fiber reinforced polymer composites.

Conformal BaTiO3 Films with High Piezoelectric Coupling through an Optimized Hydrothermal Synthesis.

Two-dimensional (2D) ferroelectric films have vast applications due to their dielectric, ferroelectric, and piezoelectric properties that meet the requirements of sensors, nonvolatile ferroelectric random access memory (NVFeRAM) devices, and micro-electromechanical systems (MEMS). However, the small surface area of these 2D ferroelectric films has limited their ability to achieve higher memory storage density in NVFeRAM devices and more sensitive sensors and transducer. Thus, conformally deposited ferroelectric films have been actively studied for these applications in order to create three-dimensional (3D) structures, which lead to a larger surface area.

Lead-free 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 nanowires for energy harvesting.

Lead-free piezoelectric nanowires (NWs) show strong potential in sensing and energy harvesting applications due to their flexibility and ability to convert mechanical energy to electric energy. Currently, most lead-free piezoelectric NWs are produced through low yield synthesis methods and result in low electromechanical coupling, which limit their efficiency as energy harvesters. In order to alleviate these issues, a scalable method is developed to synthesize perovskite type 0.

Morphology-controlled ZnO nanowire arrays for tailored hybrid composites with high damping.

Hybrid fiber reinforced composites using a nanoscale reinforcement of the interface have not reached their optimal performance in practical applications due to their complex design and the challenging assembly of their multiscale components. One promising approach to the fabrication of hybrid composites is the growth of zinc oxide (ZnO) nanowire arrays on the surface of carbon fibers to provide improved interfacial strength and out of plane reinforcement. However, this approach has been demonstrated mainly on fibers and thus still requires complex processing conditions.