Mechanism behind the Controlled Generation of Liquid Metal Nanoparticles by Mechanical Agitation.

The size-controlled synthesis of liquid metal nanoparticles is necessary in a variety of applications. Sonication is a common method for breaking down bulk liquid metals into small particles, yet the influence of critical factors such as liquid metal composition has remained elusive. Our study employs high-speed imaging to unravel the mechanism of liquid metal particle formation during mechanical agitation.

Liquid Metal Doping Induced Asymmetry in Two-Dimensional Metal Oxides.

The emergence of ferroelectricity in two-dimensional (2D) metal oxides is a topic of significant technological interest; however, many 2D metal oxides lack intrinsic ferroelectric properties. Therefore, introducing asymmetry provides access to a broader range of 2D materials within the ferroelectric family. Here, the generation of asymmetry in 2D SnO by doping the material with HfZrO (HZO) is demonstrated.

Foreign body aspiration and mucormycosis: a case report.

Over the course of the Coronavirus disease 2019 (COVID-19) pandemic, numerous complications have been documented. In this report, we have detailed an unexpected complication of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection that occurred in a 73-year-old female patient who was simultaneously afflicted with mucormycosis and another unanticipated problem. Due to the lack of recovery of the patient after receiving mucormycosis treatment and continued fever, cough and hemoptysis, bronchoscopy was performed for her.

Mesoporous bimetallic S-doped nanoparticles prepared via hydrothermal method for enhanced photodegradation of 4-chlorophenol.

Magnesium oxides (MgO) have gained shown significant promise for a variety of applications, which can be modified by ions doping. In this study, bimetallic Ag-doped S-MgO nanoparticles were prepared by hydrothermal method and used for photocatalytic degradation of 4-chlorophenl (4-CP). EDX suggested the presence of no impurities, which mainly contained Mg, Ag, and S elements, suggesting that S and Ag were incorporated into the lattice of MgO as a result of successful doping.

Polyphenol-Mediated Liquid Metal Composite Architecture for Solar Thermoelectric Generation.

The development of advanced solar energy technologies, which efficiently convert solar energy to heat and then to electricity, remains a significant challenge in the pursuit of clean energy production. Here, this challenge is addressed by designing a photothermal absorber composed of liquid gallium particles and a natural polyphenol-based coordination ink. The design of this composite takes advantage of the tuneable light absorption properties of the polyphenol inks and can also be applied onto flexible substrates.

Liquid Metal Interface for Two-Precursor Autogenous Deposition of Metal Telluride-Tellurium Networks.

Liquid metal-electrolyte can offer electrochemically reducing interfaces for the self-deposition of low-dimensional nanomaterials. We show that implementing such interfaces from multiprecursors is a promising pathway for achieving nanostructured films with combinatory properties and functionalities. Here, we explored the liquid metal-driven interfacial growth of metal tellurides using eutectic gallium-indium (EGaIn) as the liquid metal and the cation pairs Ag-HTeO and Cu-HTeO as the precursors.

Robust Switchable Polarization and Coupled Electronic Characteristics of Magnesium-Doped Zinc Oxide.

Ferroelectrics possess a spontaneous polarization that is switchable by an electric field and is critical for the development of low-energy nanoelectronics and neuromorphic applications. However, apart from a few recent developments, the realization of switchable polarization in metal oxides with simpler structures has been a major challenge. Here, we demonstrate the presence of robust switchable polarization at the level of a single nanocrystallite in magnesium-doped zinc oxide thin films with polar wurtzite crystal structures.

Liquid-Metal Solvents for Designing Hierarchical Nanoporous Metals at Low Temperatures.

Metallic nanoarchitectures hold immense value as functional materials across diverse applications. However, major challenges lie in effectively engineering their hierarchical porosity while achieving scalable fabrication at low processing temperatures. Here we present a liquid-metal solvent-based method for the nanoarchitecting and transformation of solid metals.

Statistical modeling and optimization of dexamethasone adsorption from aqueous solution by Fe3O4@NH2-MIL88B nanorods: Isotherm, Kinetics, and Thermodynamic.

The presence of pharmaceutical compounds in the environment poses a significant threat to human and aquatic animal health. Dexamethasone (DEX), a synthetic steroid hormone with endocrine-disrupting effects, is one such compound that needs to be effectively removed before discharging into the environment. This research presents a novel approach utilizing magnetically recyclable FeO@NH-MIL NRs as an efficient adsorbent for the treatment of DEX from aqueous solutions.

A liquid metal-polydopamine composite for cell culture and electro-stimulation.

Gallium (Ga) is a low melting point metal in the liquid state in the biological environment which presents a unique combination of fluidity, softness, and metallic electrical and thermal properties. In this work, liquid Ga is proposed as a biocompatible electrode material for cell culture by electro-stimulation since the cytotoxicity of Ga is generally considered low and some Ga compounds have been reported to exhibit anti-bacterial and anti-inflammatory activities. Complementarily, polydopamine (PDA) was coated on liquid Ga to increase the attachment capability of cells on the liquid Ga electrode and provide enhanced biocompatibility.

Coating of gallium-based liquid metal particles with molybdenum oxide and oxysulfide for electronic band structure modulation.

Liquid metal (LM) droplets are now used in many applications including catalysis, sensing, and flexible electronics. Consequently, the introduction of methods for on-demand alternating electronic properties of LMs is necessary. The active surface of LMs provides a unique environment for spontaneous chemical reactions that enable the formation of thin layers of functional materials for such modulations.

Formation of inorganic liquid gallium particle-manganese oxide composites.

Gallium (Ga) is a low melting point post-transition metal that, under mild mechanical agitation, can form micron and submicron-sized particles with combined fluid-like and metallic properties. In this work, an inorganic network of Ga liquid metal particles was synthesised spontaneous formation of manganese (Mn) oxide species on their liquid metallic surfaces forming an all-inorganic composite. The micron-sized Ga particles formed by sonication were connected together by Mn oxide nanostructures spontaneously established from the reduction of a Mn salt in aqueous solution slightly above the melting point of Ga.

Liquid metal synthesis solvents for metallic crystals.

In nature, snowflake ice crystals arrange themselves into diverse symmetrical six-sided structures. We show an analogy of this when zinc (Zn) dissolves and crystallizes in liquid gallium (Ga). The low-melting-temperature Ga is used as a "metallic solvent" to synthesize a range of flake-like Zn crystals.

Liquid Metal-Templated Tin-Doped Tellurium Films for Flexible Asymmetric Pseudocapacitors.

Liquid metals can be surface activated to generate a controlled galvanic potential by immersing them in aqueous solutions. This creates energized liquid-liquid interfaces that can promote interfacial chemical reactions. Here we utilize this interfacial phenomenon of liquid metals to deposit thin films of tin-doped tellurium onto rigid and flexible substrates.

Electrical Response of Poly(-[3-(dimethylamino)Propyl] Methacrylamide) to CO at a Long Exposure Period.

Amine-functionalized polymers (AFPs) are able to react with carbon dioxide (CO) and are therefore useful in CO capture and sensing. To develop AFP-based CO sensors, it is critical to examine their electrical responses to CO over long periods of time, so that the device can be used consistently for measuring CO concentration. To this end, we synthesized poly(-[3-(dimethylamino)propyl] methacrylamide) (pDMAPMAm) by free radical polymerization and tested its ability to behave as a CO-responsive polymer in a transducer.

Insights into the Interfacial Contact and Charge Transport of Gas-Sensing Liquid Metal Marbles.

Understanding the interfacial contacts between liquid metals and substrate materials is becoming increasingly important for the fast-rising liquid metal-enabled technologies. However, for such technologies, probing the contact behavior and interfacial charge transport has remained challenging due to the deformable nature of liquid metals and the presence of the surface oxide layer. Here, we encapsulate eutectic gallium indium (EGaIn) micro-/nanodroplets with tungsten trioxide (WO) nanoparticles to form a WO/EGaIn liquid metal marble network, in which the interfacial contact of the intrinsically semiconducting WO governs the charge transport.

Low Temperature Nano Mechano-electrocatalytic CH Conversion.

Transforming natural resources to energy sources, such as converting CH to H and carbon, at high efficiency and low cost is crucial for many industries and environmental sustainability. The high temperature requirement of CH conversion regarding many of the current methods remains a critical bottleneck for their practical uptake. Here we report an approach based on gallium (Ga) liquid metal droplets, Ni(OH) cocatalysts, and mechanical energy input that offers low-temperature and scalable CH conversion into H and carbon.

Applications of liquid metals in nanotechnology.

Post-transition liquid metals (LMs) offer new opportunities for accessing exciting dynamics for nanomaterials. As entities with free electrons and ions as well as fluidity, LM-based nanomaterials are fundamentally different from their solid counterparts. The low melting points of most post-transition metals (less than 330 °C) allow for the formation of nanodroplets from bulk metal melts under mild mechanical and chemical conditions.

Liquid-Metal-Assisted Deposition and Patterning of Molybdenum Dioxide at Low Temperature.

Molybdenum dioxide (MoO), considering its near-metallic conductivity and surface plasmonic properties, is a great material for electronics, energy storage devices and biosensing. Yet to this day, room-temperature synthesis of large area MoO, which allows deposition on arbitrary substrates, has remained a challenge. Due to their reactive interfaces and specific solubility conditions, gallium-based liquid metal alloys offer unique opportunities for synthesizing materials that can meet these challenges.

Polydopamine Shell as a Ga Reservoir for Triggering Gallium-Indium Phase Separation in Eutectic Gallium-Indium Nanoalloys.

Low melting point eutectic systems, such as the eutectic gallium-indium (EGaIn) alloy, offer great potential in the domain of nanometallurgy; however, many of their interfacial behaviors remain to be explored. Here, a compositional change of EGaIn nanoalloys triggered by polydopamine (PDA) coating is demonstrated. Incorporating PDA on the surface of EGaIn nanoalloys renders core-shell nanostructures that accompany Ga-In phase separation within the nanoalloys.

Liquid-Metal-Enabled Mechanical-Energy-Induced CO Conversion.

A green carbon capture and conversion technology offering scalability and economic viability for mitigating CO emissions is reported. The technology uses suspensions of gallium liquid metal to reduce CO into carbonaceous solid products and O at near room temperature. The nonpolar nature of the liquid gallium interface allows the solid products to instantaneously exfoliate, hence keeping active sites accessible.

Doping Process of 2D Materials Based on the Selective Migration of Dopants to the Interface of Liquid Metals.

The introduction of trace impurities within the doping processes of semiconductors is still a technological challenge for the electronics industries. By taking advantage of the selective enrichment of liquid metal interfaces, and harvesting the doped metal oxide semiconductor layers, the complexity of the process can be mitigated and a high degree of control over the outcomes can be achieved. Here, a mechanism of natural filtering for the preparation of doped 2D semiconducting sheets based on the different migration tendencies of metallic elements in the bulk competing for enriching the interfaces is proposed.

Nanotip Formation from Liquid Metals for Soft Electronic Junctions.

Liquid metals and alloys with high-aspect-ratio nanodimensional features are highly sought-after for emerging electronic applications. However, high surface tension, water-like fluidity, and the existence of self-limiting oxides confer specific peculiarities to their characteristics. Here, we introduce a high accuracy nanometric three-dimensional pulling and stretching method to fabricate liquid-metal-based nanotips from room- or near-room-temperature gallium-based alloys.

Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures.

The emergence of three-dimensional (3D) printing promises a disruption in the design and on-demand fabrication of smart structures in applications ranging from functional devices to human organs. However, the scale at which 3D printing excels is within macro- and microlevels and principally lacks the spatial ordering of building blocks at nanolevels, which is vital for most multifunctional devices. Herein, we employ liquid crystal (LC) inks to bridge the gap between the nano- and microscales in a single-step 3D printing.

Unique surface patterns emerging during solidification of liquid metal alloys.

It is well-understood that during the liquid-to-solid phase transition of alloys, elements segregate in the bulk phase with the formation of microstructures. In contrast, we show here that in a Bi-Ga alloy system, highly ordered nanopatterns emerge preferentially at the alloy surfaces during solidification. We observed a variety of transition, hybrid and crystal-defect-like patterns, in addition to lamellar and rod-like structures.