Quantifying Platinum and Palladium in Solid Ore Using Laser-Induced Breakdown Spectroscopy Assisted by the Laser-Induced Fluorescence (LIBS-LIF) Technique.

The laser-induced breakdown spectroscopy assisted by laser-induced fluorescence (LIBS-LIF) in a two-step process was used to measure the concentration of platinum (Pt) and palladium (Pd) by surface analysis of a solid ore core from the Lac des Iles mine followed by analysis of the same core that was pulverized and compacted. This work focuses mainly on the measurement of Pt since the case of Pd has been extensively discussed in previous work. The excitation of Pt is performed at 235.

Trace Selenium Measurement in Water Using Laser-Induced Fluorescence Assisted by Laser Ablation.

Selenium detection and removal from industrial and mining effluents have gained attention recently due to the negative effects of this trace element on aquatic life. However, the current methods for the detection of selenium in effluents are off-line by nature. In order to fill this gap, we investigated the use of laser ablation-assisted laser-induced fluorescence (LA-LIF) to measure trace amount of selenium in aqueous solutions.

North American Symposium on Laser Induced Breakdown Spectroscopy (NASLIBS): introduction to feature issue.

This feature issue highlights the topics of the 2011 North American Symposium on Laser Induced Breakdown Spectroscopy (NASLIBS). These include LIBS application to Security and Forensic, Biomedical and Environmental, Liquid Analysis and Fundamentals of LIBS, Instrumentation/Commercialization, Fusion with LIBS, and New Frontiers.

Multiband sensor using thick holographic gratings for sulfur detection by laser-induced breakdown spectroscopy.

Detection of sulfur by optical emission spectroscopy generally presents some difficulties because the strongest lines are in the vacuum UV below 185 nm and therefore are readily absorbed by oxygen molecules in air. A novel concept for a low-cost and efficient system to detect sulfur using near-IR bands by laser-induced breakdown spectroscopy is here proposed. This concept is based on customized thick holographic gratings as spectral filtering elements.

Rapid quantitative analysis of magnesium stearate in tablets using laser-induced breakdown spectroscopy.

Purpose: Laser-induced breakdown spectroscopy (LIBS) was evaluated for its potential as a process analytical tool for the rapid determination of magnesium stearate (MgSt) distribution within and between tablets as well as between batches in a typical manufacturing run, and for the comparison of direct-compression and roller-compaction processes.

Methods: These studies were conducted using a prototype instrument and a commercial PharmaLIBS unit, both based on pulsed Nd:YAG laser radiation at 1064 nm. The intensity of a magnesium spectral line either at 517.

Investigation of the state of local thermodynamic equilibrium of a laser-produced aluminum plasma.

In this work, the assumption of local thermodynamic equilibrium (LTE) for a laser-induced plasma in ambient air is examined experimentally using two different laser systems, namely an infrared short-pulse Ti : Sapphire laser and an ultraviolet long-pulse XeCl excimer laser. The LTE assumption is investigated by examining the plasma produced at a laser fluence of 10 J/cm(2) from aluminum targets containing iron and magnesium impurities. The excitation temperature is deduced from Boltzmann diagrams built from a large number of spatially integrated neutral iron lines distributed from 3.

Laser-ablated volume and depth as a function of pulse duration in aluminum targets.

The ablated depth and volume per laser pulse from an aluminum target were measured for pulse durations that ranged from 80 fs to 270 ps at an average fluence of approximately 100 J/cm2 and a wavelength of 0.8 microm. The ablated volume showed a flat maximum for subpicosecond pulses and a minimum for approximately 6 ps.

Rapid analysis of liquid formulations containing sodium chloride using laser-induced breakdown spectroscopy.

The purpose of this work was to demonstrate the possibilities offered by laser-induced breakdown spectroscopy (LIBS) for the direct and rapid analysis of pharmaceutical liquid formulations. Sodium chloride in solution was chosen as a model compound. A pulsed Nd:YAG laser (1064 nm) was used to produce a gaseous plasma from the liquid sample.

Comparative study of two new commercial echelle spectrometers equipped with intensified CCD for analysis of laser-induced breakdown spectroscopy.

The purpose of this paper is to provide the reader with comparative information about two new commercial echelle spectrometers equipped with intensified CCD (ICCD) detectors for laser-induced breakdown spectroscopy analysis. We carried out a performance comparison between two commercial ICCD/echelle spectrometers [ESA 3000 (LLA Instruments GmbH, Berlin-Adlershof, Germany) and a Mechelle 7500 (Multichannel Instruments, Stockholm, Sweden)] for the determination of the concentrations of Be, Mg, Si, Mn, Fe, and Cu in the same Al alloy samples adopting the same experimental conditions. The results show that both systems, despite their differences in terms of resolution, have similar performance in terms of sensitivity and precision of measurements for these elements in an Al alloy matrix at least for the range of wavelength 280-400 nm studied in this work.

Influence of Er:YAG and Nd:YAG wavelengths on laser-induced breakdown spectroscopy measurements under air or helium atmosphere.

Laser-induced breakdown spectroscopy (LIBS) is widely dependent on the conditions of its implementation in terms of laser characteristics (wavelength, energy, and pulse duration), focusing conditions, and surrounding gas. In this study two wavelengths, 1.06 and 2.