Investigation of the mechanical work during ultrasonic fatigue loading using pulsed time-resolved X-ray diffraction.

In the energy production and transportation industries, numerous metallic structures may be subjected to at least several billions of cycles, i.e. loaded in the very high cycle fatigue domain (VHCF).

On the microstructure and texture of intermetallics in Al/Mg/Al multi-layer composite fabricated by Accumulative Roll Bonding.

The microstructure and texture of the intermetallics in Al/Mg/Al multi-layer composite fabricated by Accumulative Roll Bonding (ARB) at 400 °C up to 6 cycles were investigated using Electron BackScatter Diffraction (EBSD) and Synchrotron X-ray Diffraction (SXRD). EBSD and SXRD analysis have shown that ARB processing leads to the formation of AlMg and MgAl intermetallics soon after the second ARB cycle with a global thickness of 12 (N = 2) to 22 µm (N = 6). The polycrystalline intermetallics plates growth was columnar and normal to the bonding interface.

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBa Cu O -x Superconducting Films.

Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBa Cu O (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes.

The CirPAD, a circular 1.4 M hybrid pixel detector dedicated to X-ray diffraction measurements at Synchrotron SOLEIL.

One of the challenges of all synchrotron facilities is to offer the highest performance detectors for all their specific experiments, in particular for X-ray diffraction imaging and its high throughput data collection. In that context, the DiffAbs beamline, the Detectors and the Design and Engineering groups at Synchrotron SOLEIL, in collaboration with ImXPAD and Cegitek companies, have developed an original and unique detector with a circular shape. This detector is based on the hybrid pixel photon-counting technology and consists of the specific assembly of 20 hybrid pixel array detector (XPAD) modules.

Combinatorial Screening of Cuprate Superconductors by Drop-On-Demand Inkjet Printing.

Combinatorial and high-throughput experimentation (HTE) is achieving more relevance in material design, representing a turning point in the process of accelerated discovery, development, and optimization of materials based on data-driven approaches. The versatility of drop-on-demand inkjet printing (IJP) allows performing combinatorial studies through fabrication of compositionally graded materials with high spatial precision, here by mixing superconducting REBCO precursor solutions with different rare earth (RE) elements. The homogeneity of combinatorial YGdBaCuO samples was designed with computational methods and confirmed by energy-dispersive X-ray spectroscopy (EDX) and high-resolution X-ray diffraction (XRD).

Lattice Strain Evolutions in Ni-W Alloys during a Tensile Test Combined with Synchrotron X-ray Diffraction.

Ni and Ni(W) solid solution of bulk Ni and Ni-W alloys (Ni-10W, Ni-30W, and Ni-50W) (wt%) were mechanically compared through the evolution of their {111} X-ray diffraction peaks during in situ tensile tests on the DiffAbs beamline at the Synchrotron SOLEIL. A significant difference in terms of strain heterogeneities and lattice strain evolution occurred as the plastic activity increased. Such differences are attributed to the number of brittle W clusters and the hardening due to the solid solution compared to the single-phase bulk Ni sample.

Visualizing mineralization processes and fossil anatomy using synchronous synchrotron X-ray fluorescence and X-ray diffraction mapping.

Fossils, including those that occasionally preserve decay-prone soft tissues, are mostly made of minerals. Accessing their chemical composition provides unique insight into their past biology and/or the mechanisms by which they preserve, leading to a series of developments in chemical and elemental imaging. However, the mineral composition of fossils, particularly where soft tissues are preserved, is often only inferred indirectly from elemental data, while X-ray diffraction that specifically provides phase identification received little attention.

Detecting the Guttman effect with the help of ordinal correspondence analysis in synchrotron X-ray diffraction data analysis.

We propose a method for detecting a Guttman effect in a complete disjunctive table with questions. Since such an investigation is a nonsense when the variables are independent, we reuse a previous unpublished work about the chi-squared independence test for Burt's tables. Then, we introduce a two-steps method consisting in plugging the first singular vector from a preliminary Correspondence Analysis (CA) of as a score into a subsequent singly-ordered Ordinal Correspondence Analysis (OCA) of .

Piezoelectric Properties of PbLa(ZrTi)O Thin Films Studied by In Situ X-ray Diffraction.

The piezoelectric properties of lanthanum-modified lead zirconate titanate PbLa(ZrTi)O thin films, with = 0, 3 and 12 mol% La, were studied by synchrotron X-ray diffraction under direct (DC) and alternating (AC) electric fields, with AC frequencies covering more than four orders of magnitude. The Bragg reflections for thin films with low lanthanum concentration exhibit a double-peak structure, indicating two contributions, whereas thin films with 12% La possess a well-defined Bragg peak with a single component. In addition, built-in electric fields are revealed for low La concentrations, while they are absent for thin films with 12% of La.

Direct Observations of the Structural Properties of Semiconducting Polymer: Fullerene Blends under Tensile Stretching.

We describe the impact of tensile strains on the structural properties of thin films composed of PffBT4T-2OD π-conjugated polymer and PCBM fullerenes coated on a stretchable substrate, based on a novel approach using in situ studies of flexible organic thin films. In situ grazing incidence X-ray diffraction (GIXD) measurements were carried out to probe the ordering of polymers and to measure the strain of the polymer chains under uniaxial tensile tests. A maximum 10% tensile stretching was applied (i.

Stress Buildup Upon Crystallization of GeTe Thin Films: Curvature Measurements and Modelling.

Phase change materials are attractive materials for non-volatile memories because of their ability to switch reversibly between an amorphous and a crystal phase. The volume change upon crystallization induces mechanical stress that needs to be understood and controlled. In this work, we monitor stress evolution during crystallization in thin GeTe films capped with SiO, using optical curvature measurements.

Ultrafast transient liquid assisted growth of high current density superconducting films.

The achievement of high growth rates in YBaCuO epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s) and high critical current densities (5 MA cm at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach.

Microsecond time-resolved X-ray diffraction for the investigation of fatigue behavior during ultrasonic fatigue loading.

A new method based on time-resolved X-ray diffraction is proposed in order to measure the elastic strain and stress during ultrasonic fatigue loading experiments. Pure Cu was chosen as an example material for the experiments using a 20 kHz ultrasonic fatigue machine mounted on the six-circle diffractometer available at the DiffAbs beamline on the SOLEIL synchrotron facility in France. A two-dimensional hybrid pixel X-ray detector (XPAD3.

Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-ray diffraction.

Deformation mechanisms of cold drawn and electropolished nickel microwires are studied by performing in-situ monotonous and cyclic tensile tests under synchrotron radiation. X-ray diffraction tests allow probing elastic strains in the different grain families and establishing a link with the deformation mechanisms taking place within the microwires. The measurements were carried out on several microwires with diameters ranging from as-drawn 100 µm down to 40 µm thinned down by electropolishing.

Cross-Correlation between Strain, Ferroelectricity, and Ferromagnetism in Epitaxial Multiferroic CoFeO/BaTiO Heterostructures.

Multiferroic biphase systems with robust ferromagnetic and ferroelectric response at room temperature would be ideally suitable for voltage-controlled nonvolatile memories. Understanding the role of strain and charges at interfaces is central for an accurate control of the ferroelectricity as well as of the ferromagnetism. In this paper, we probe the relationship between the strain and the ferromagnetic/ferroelectric properties in the layered CoFeO/BaTiO (CFO/BTO) model system.

Impact of Stoichiometry on the Structure of van der Waals Layered GeTe/Sb Te Superlattices Used in Interfacial Phase-Change Memory (iPCM) Devices.

Van der Waals layered GeTe/Sb Te superlattices (SLs) have demonstrated outstanding performances for use in resistive memories in so-called interfacial phase-change memory (iPCM) devices. GeTe/Sb Te SLs are made by periodically stacking ultrathin GeTe and Sb Te crystalline layers. The mechanism of the resistance change in iPCM devices is still highly debated.

Fast X-ray reflectivity measurements using an X-ray pixel area detector at the DiffAbs beamline, Synchrotron SOLEIL.

This paper describes a method for rapid measurements of the specular X-ray reflectivity signal using an area detector and a monochromatic, well collimated X-ray beam (divergence below 0.01°), combined with a continuous data acquisition mode during the angular movements of the sample and detector. In addition to the total integrated (and background-corrected) reflectivity signal, this approach yields a three-dimensional mapping of the reciprocal space in the vicinity of its origin.

Finite size effect on the structural and magnetic properties of MnAs/GaAs(001) patterned microstructures thin films.

MnAs epitaxial thin films on GaAs(001) single crystalline substrates crystallize at room temperature (RT) in a mixture of two crystalline phases with distinct magnetic properties, organized as stripes along the MnAs [0001] direction. This particular morphology is driven by anisotropic epitaxial strain. We elucidate here the physical mechanisms at the origin of size reduction effect on the MnAs crystalline phase transition.

Flyscan opportunities in medicine: the case of quantum rattle based on gold quantum dots.

The new rapid scan method, Flyscan mode, implemented on the DiffAbs beamline at Synchrotron SOLEIL, allows fast micro-X-ray fluorescence data acquisition. It paves the way for applications in the biomedical field where a large amount of data is needed to generate meaningful information for the clinician. This study presents a complete set of data acquired after injection of gold-cluster-enriched mesoporous silica nanospheres, used as potential theranostic vectors, into rats.

Electrolytes at interfaces: accessing the first nanometers using X-ray standing waves.

Ion-surface interactions are of high practical importance in a wide range of technological, environmental and biological problems. In particular, they ultimately control the electric double layer structure, hence the interaction between particles in aqueous solutions. Despite numerous achievements, progress in their understanding is still limited by the lack of experimental determination of the surface composition with appropriate resolution.

Atom-scale depth localization of biologically important chemical elements in molecular layers.

In nature, biomolecules are often organized as functional thin layers in interfacial architectures, the most prominent examples being biological membranes. Biomolecular layers play also important roles in context with biotechnological surfaces, for instance, when they are the result of adsorption processes. For the understanding of many biological or biotechnologically relevant phenomena, detailed structural insight into the involved biomolecular layers is required.

Continuous and Collective Grain Rotation in Nanoscale Thin Films during Silicidation.

Texture evolution is an important issue in materials and nanosciences. Understanding it is fundamental for controlling the final orientation, which in fine controls the desired properties of nanodevices. Here, we reveal the formation of a peculiar texture during the silicidation of nanoscale Pd thin films.

Laterally Ordered Sub-10 nm Features Obtained From Directed Self-Assembly of Si-Containing Block Copolymer Thin Films.

Laterally ordered sub-10 nm features are produced from the directed self-assembly of poly(1,1-dimethyl silacyclo-butane)-block-poly(methyl methacrylate) (PDMSB-b-PMMA) thin films on sinusoidal azobenzene-containing patterns. The use of sinusoidal surface relief grating enables the formation of very large grain areas (over several µm(2) ) consisting of out-of-plane PMMA cylinders.

Cerium anomaly at microscale in fossils.

Patterns in rare earth element (REE) concentrations are essential instruments to assess geochemical processes in Earth and environmental sciences. Excursions in the "cerium anomaly" are widely used to inform on past redox conditions in sediments. This proxy resources to the specificity of cerium to adopt both the +III and +IV oxidation states, while most rare earths are purely trivalent and share very similar reactivity and transport properties.

Trace elemental imaging of rare earth elements discriminates tissues at microscale in flat fossils.

The interpretation of flattened fossils remains a major challenge due to compression of their complex anatomies during fossilization, making critical anatomical features invisible or hardly discernible. Key features are often hidden under greatly preserved decay prone tissues, or an unpreparable sedimentary matrix. A method offering access to such anatomical features is of paramount interest to resolve taxonomic affinities and to study fossils after a least possible invasive preparation.