Surgical Correction of Unicoronal Synostosis: Fronto-orbital Distraction versus Calvarial Switch.

Background: There is a need for a new, less invasive surgical option for unicoronal synostosis (UCS). The aim of this study was to compare the resulting morphology and symmetry in patients with UCS following fronto-orbital distraction (FOD) or calvarial switch (CS).

Methods: 79 patients with isolated UCS operated between 2005 and 2021 were analyzed.

Availability and affordability of selected medicines in the Islamic Republic of Iran.

Background: There is a standard methodology for measuring and evaluating the availability and affordability of selected medicines in the healthcare system, especially in low- and middle-income countries.

Aim: To investigate availability, affordability and accessibility of medicines in the Islamic Republic of Iran in 2021 and compare the results with those from 2019.

Methods: This descriptive cross-sectional study investigated the availability and affordability of 60 selected medicines in Islamic Republic of Iran.

Hindlimb kinematics, kinetics and muscle dynamics during sit-to-stand and sit-to-walk transitions in emus (Dromaius novaehollandiae).

Terrestrial animals not only need to walk and run but also lie prone to rest and then stand up. Sit-to-stand (STS) and sit-to-walk (STW) transitions are vital behaviours little studied in species other than humans so far, but likely impose biomechanical constraints on limb design because they involve near-maximal excursions of limb joints that should require large length changes and force production from muscles. By integrating data from experiments into musculoskeletal simulations, we analysed joint motions, ground reaction forces, and muscle dynamics during STS and STW in a large terrestrial, bipedal and cursorial bird: the emu (Dromaius novaehollandiae; body mass ∼30 kg).

A physico-mechanical model of postnatal craniofacial growth in human.

Our fundamental understanding of the physico-mechanical forces that drive the size and shape changes of the cranium during ontogeny are limited. Biomechanical models based on finite element method present a huge opportunity to address this critical gap in our knowledge. Here, we describe a validated computational framework to predict normal craniofacial growth.

New diagnostic criteria for metopic ridges and trigonocephaly: a 3D geometric approach.

Background: Trigonocephaly occurs due to the premature fusion of the metopic suture, leading to a triangular forehead and hypotelorism. This condition often requires surgical correction for morphological and functional indications. Metopic ridges also originate from premature metopic closure but are only associated with mid-frontal bulging; their surgical correction is rarely required.

BounTI (boundary-preserving threshold iteration): A user-friendly tool for automatic hard tissue segmentation.

X-ray Computed Tomography (CT) images are widely used in various fields of natural, physical, and biological sciences. 3D reconstruction of the images involves segmentation of the structures of interest. Manual segmentation has been widely used in the field of biological sciences for complex structures composed of several sub-parts and can be a time-consuming process.

Comparative analysis of osteoderms across the lizard body.

Osteoderms (ODs) are mineralized tissue embedded within the skin and are particularly common in reptiles. They are generally thought to form a protective layer between the soft tissues of the animal and potential external threats, although other functions have been proposed. The aim of this study was to characterize OD variation across the lizard body.

Multiscale mechanical characterisation of the craniofacial system under external forces.

Premature fusion of craniofacial joints, i.e. sutures, is a major clinical condition.

Mechanical assessment of novel compliant mechanisms for underactuated prosthetic hands.

This paper proposes novel compliant mechanisms for constructing hand prostheses based on soft robotics. Two models of prosthetic hands are developed in this work. Three mechanical evaluations are performed to determine the suitability of the two designs for carrying out activities of daily living (ADLs).

Acute or Short-term Effects of Whey Protein Alone or Along with Carbohydrate on Inflammation: A Systematic Review of Clinical Trials:

Background: Excessive inflammatory response is associated with several diseases. Recently, there has been an increasing trend for investigation of the acute or short-term effects of whey protein alone or in combination with carbohydrates on inflammatory status, especially in athletes. This systematic review aimed to clarify these effects.

Anthropometric indices, nutrient intakes and health-related characteristics of patients with multiple sclerosis: a cross-sectional study.

Background: Multiple sclerosis (MS) is accompanied by many health-related issues. This study aimed to evaluate the anthropometric indices, nutrient intakes and health-related characteristics of MS patients as well as their possible correlations.

Methods: This cross-sectional study was performed on 283 MS patients in Shiraz, Iran, during 2018-2019.

A fabric-based soft hand exoskeleton for assistance: the ExHand Exoskeleton.

Introduction: The rise of soft robotics has driven the development of devices for assistance in activities of daily living (ADL). Likewise, different types of actuation have been developed for safer human interaction. Recently, textile-based pneumatic actuation has been introduced in hand exoskeletons for features such as biocompatibility, flexibility, and durability.

Normal human craniofacial growth and development from 0 to 4 years.

Knowledge of human craniofacial growth (increase in size) and development (change in shape) is important in the clinical treatment of a range of conditions that affects it. This study uses an extensive collection of clinical CT scans to investigate craniofacial growth and development over the first 48 months of life, detail how the cranium changes in form (size and shape) in each sex and how these changes are associated with the growth and development of various soft tissues such as the brain, eyes and tongue and the expansion of the nasal cavity. This is achieved through multivariate analyses of cranial form based on 3D landmarks and semi-landmarks and by analyses of linear dimensions, and cranial volumes.

Prophylactic Agents for Preventing Cardiotoxicity Induced Following Anticancer Agents: A Systematic Review and Meta-Analysis of Clinical Trials.

Background: Anthracyclines can improve survival in many types of malignancies, but dose-dependent and irreversible results following the use of anthracyclines have been associated with cardiomyopathy. This meta-analysis aimed to compare the effects of prophylactic agents for preventing cardiotoxicity induced following anticancer agents.

Methods: In this meta-analysis, Scopus, Web of Science, and PubMed were surfed for articles published by December 30, 2020.

A novel hybrid design and modelling of a customised graded Ti-6Al-4V porous hip implant to reduce stress-shielding: An experimental and numerical analysis.

Stress shielding secondary to bone resorption is one of the main causes of aseptic loosening, which limits the lifespan of hip prostheses and exacerbates revision surgery rates. In order to minimise post-hip replacement stress variations, this investigation proposes a low-stiffness, porous Ti6Al4V hip prosthesis, developed through selective laser melting (SLM). The stress shielding effect and potential bone resorption properties of the porous hip implant were investigated through both quasi-physiological experimental assays, together with finite element analysis.

Icex: Advances in the automatic extraction and volume calculation of cranial cavities.

The use of non-destructive approaches for digital acquisition (e.g. computerised tomography-CT) allows detailed qualitative and quantitative study of internal structures of skeletal material.

The role of cranial osteoderms on the mechanics of the skull in scincid lizards.

Osteoderms (ODs) are calcified organs formed directly within the skin of most major extant tetrapod lineages. Lizards possibly show the greatest diversity in ODs morphology and distribution. ODs are commonly hypothesized to function as a defensive armor.

A preliminary analysis of replicating the biomechanics of helmet therapy for sagittal craniosynostosis.

Purpose: The aim of this study was to investigate the biomechanics of endoscopically assisted strip craniectomy treatment for the management of sagittal craniosynostosis while undergoing three different durations of postoperative helmet therapy using a computational approach.

Methods: A previously developed 3D model of a 4-month-old sagittal craniosynostosis patient was used. The strip craniectomy incisions were replicated across the segmented parietal bones.

Synchondrosis fusion contributes to the progression of postnatal craniofacial dysmorphology in syndromic craniosynostosis.

Syndromic craniosynostosis (CS) patients exhibit early, bony fusion of calvarial sutures and cranial synchondroses, resulting in craniofacial dysmorphology. In this study, we chronologically evaluated skull morphology change after abnormal fusion of the sutures and synchondroses in mouse models of syndromic CS for further understanding of the disease. We found fusion of the inter-sphenoid synchondrosis (ISS) in Apert syndrome model mice (Fgfr2 ) around 3 weeks old as seen in Crouzon syndrome model mice (Fgfr2c ).

Differences between two sequential uncemented stem sizes in total hip arthroplasty: A comparative biomechanical study and potential clinical implications.

Background: Early failure of uncemented femoral stems associated with incorrect sizing is a known postoperative complication. Surgeons are often faced with the question of whether an uncemented stem of adequate stability or a larger-sized stem should be implanted, especially when the proximal femoral cancellous bone is adequate. The biomechanical effect of sub-optimal stem sizing in the femur remains unclear.

Mechanical Characterisation and Numerical Modelling of TPMS-Based Gyroid and Diamond Ti6Al4V Scaffolds for Bone Implants: An Integrated Approach for Translational Consideration.

Additive manufacturing has been used to develop a variety of scaffold designs for clinical and industrial applications. Mechanical properties (i.e.

The relationship between the Mediterranean diet and Axis I disorders: A systematic review of observational studies.

Axis I disorders are one of the major health burdens worldwide. Evidence suggests that Mediterranean diet has key biological factors associated with reducing the progression of these disorders. This systematic review aimed to clarify the relationship between Mediterranean diet and Axis I disorders.

Biomechanical behaviour of lizard osteoderms and skin under external loading.

Many species of lizards are partially enveloped by a dermal armour made of ossified units called osteoderms. Lizard osteoderms demonstrate considerable species-specific variation in morphology and histology. Although a physical/protective role (against predators, prey, conspecifics and impact loading during falls) is frequently advanced, empirical data on the biomechanics of lizard osteoderms are scarce, limiting our understanding of form-function relationships.