Distance-based paper microfluidic devices for rapid visual quantification of heavy metals in herbal supplements and cosmetics.

Distance-based detection (DbD) on paper-based microfluidic analytical devices (μPADs) has emerged as a promising, cost-effective, simple, and instrumentation-free assay method. Broadening the applicability of a new way of immobilization of reagent for DbD on μPADs (DμPADs) is presented, employing an ion exchange (IE) interaction of an anionic metallochromic reagent, 2-(5-bromo-2-pyridylazo)-5-[-propyl--(3-sulfopropyl)amino]phenol (5-Br-PAPS), on the anion-exchange filter paper. The IE DμPADs demonstrate superiority over standard cellulose filter paper in terms of the degree of reagent immobilization, detection sensitivity, and clear detection endpoints due to the strong retention of 5-Br-PAPS.

Multi-wavelength deep-ultraviolet absorbance detector based upon program-controlled pulsing light-emitting diodes.

A novel approach for multi-wavelength ultraviolet (UV) absorbance detection has been introduced employing a single board computer (SBC) with a field programmable gate array (FPGA), Red Pitaya SBC, to generate separated micro pulses for three deep-ultraviolet light-emitting diodes (DUV-LEDs), λ = 235, 250, and 280 nm, along with data acquisition and processing via a custom-made program. The pulse set generation and data acquisition were synchronized using the SBC. The outputs of the three pulsing DUV-LEDs were combined and transmitted to the flow cell via a solarisation resistant trifurcated optical fiber (OF).

Low-tech vs. high-tech approaches in μPADs as a result of contrasting needs and capabilities of developed and developing countries focusing on diagnostics and point-of-care testing.

Paper-based analysis has captivated scientists' attention in the field of analytical chemistry and related areas for the last two decades. Arguably no other area of modern chemical analysis is so broad and diverse in its approaches spanning from simple 'low-tech' low-cost paper-based analytical devices (PADs) requiring no or simple instrumentation, to sophisticated PADs and microfluidic paper-based analytical devices (μPADs) featuring elements of modern material science and nanomaterials affording high selectivity and sensitivity. Correspondingly diverse is the applicability, covering resource-limited scenarios on the one hand and most advanced approaches on the other.

Recent advances in miniaturization of portable liquid chromatography with emphasis on detection.

Liquid chromatography is a prominent analytical technique in separation science and chemical analysis, applied across numerous fields of research and within industrial applications. Over the past few decades, there has been a growing interest in the miniaturization of this technique, which has been particularly enabled through new miniature and portable detection technologies for in-field, at-site, and point-of-need (collectively 'out-of-lab') analyses. Accordingly, significant advances have been made in recent years in the development of miniaturized liquid chromatography with photometric, electrochemical, and mass spectrometric detection, enabling the development of field-deployable and portable instruments for various applications.

Rapid and selective screening of organic peroxide explosives using acid-hydrolysis induced chemiluminescence.

Organic peroxide explosives (OPEs) are unstable, non-military, contemporary security threats often found in improvised explosive devices. Chemiluminescence (CL) can be used to detect OPEs, via radical formation consisting of peroxide moieties (-O-O-) under acidic conditions. However, selectivity for specific OPEs is hampered by the ubiquitous background of HO.

Microfluidic paper-based fluorescence sensor for L-homocysteine using a molecularly imprinted polymer and in situ-formed fluorescent quantum dots.

Microfluidic paper-based analytical devices modified with molecularly imprinted polymers (μPADs@MIPs) were developed for fluorescent detection of targeted thiols via in situ UV-induced formation of quantum dots (μPADs@MIPs@QDs). The selectivity enhancement by the MIP layer formed on the filter paper surface was demonstrated for the isolation of L-homocysteine from wine. Followed by the addition of metal precursors solution (Zn/Cd/Cu) and UV irradiation, fluorescent quantum dots were formed thus enabling quantitative detection of the thiol (serving as a QD capping agent).

Detection of pesticides in food products using paper-based devices by UV-induced fluorescence spectroscopy combined with molecularly imprinted polymers.

In this proof-of-concept study, we explore the detection of pesticides in food using a combined power of sensitive UV-induced fingerprint spectroscopy with selective capture by molecularly imprinted polymers (MIPs) and portable cost-effective paper-based analytical devices (PADs). The specific pesticides used herein as model compounds (both pure substances and their application products for spraying), were: strobilurins (i.e.

Isotachophoresis for rapid transformation of Escherichia coli.

A frequent limitation of electroporation (EP) and chemical transformation (CT) are the need of tedious and time-consuming procedures for inducing transformation competence, the substantial number of cells required, and the low transformation yields typically achieved. Here, we show a new and rapid electrokinetic method for transformation of small number of noncompetent Escherichia coli TOP10 cells (2-3 × 10 ) at room temperature. Escherichia coli TOP10 cells and plasmid DNA are sequentially injected into a 50 μm ID capillary and focused into 11.

UV-induced Zn:Cd/S quantum dots in-situ formed in the presence of thiols for sensitive and selective fluorescence detection of thiols.

In this work, we explored a new approach to a simple and sensitive fluorescence detection of thiols. The approach takes advantage of an in-situ formation of UV light-induced fluorescent nanoparticles (ZnCd/S quantum dots), while utilizing the thiol group of the analyte as a capping agent. The selectivity is ensured by the selective isolation of the thiol analyte by a polydopamine molecularly imprinted polymeric (MIP) layer.

Metallothionein dimerization evidenced by QD-based Förster resonance energy transfer and capillary electrophoresis.

Herein, we report a new simple and easy-to-use approach for the characterization of protein oligomerization based on fluorescence resonance energy transfer (FRET) and capillary electrophoresis with LED-induced detection. The FRET pair consisted of quantum dots (QDs) used as an emission tunable donor (emission wavelength of 450 nm) and a cyanine dye (Cy3), providing optimal optical properties as an acceptor. Nonoxidative dimerization of mammalian metallothionein (MT) was investigated using the donor and acceptor covalently conjugated to MT.

Miniature Multiwavelength Deep UV-LED-Based Absorption Detection System for Capillary LC.

A new miniature deep UV absorbance detector has been developed using low-cost and high-performance LEDs, which can be operated in both scanning (230 to 300 nm) and individual wavelength (240, 255, and 275 nm) detection modes. The detector is mostly composed of off-the-shelf components, such as LEDs, trifurcated fiber optic assembly, a capillary Z-type flow cell, and photodiodes. It has been characterized for use with a standard capillary LC system and was benchmarked against a standard variable wavelength capillary LC detector.

Miniaturized LC in Molecular Omics.

Miniaturized LC has evolved at an exponential rate over the last 50 years. In the past decade, it has received considerable attention in the field of bioanalytical separation science and technology due to the need to measure different classes of biomolecules present in a variety of matrixes on a global scale to gain a deeper understanding of complex biological processes. This field has become a dominant area underpinning the molecular omics research (e.

Continuous and real-time indoor and outdoor methane sensing with portable optical sensor using rapidly pulsed IR LEDs.

We designed a simple, portable, low-cost and low-weight nondispersive infrared (NDIR) spectroscopy-based system for continuous remote sensing of atmospheric methane (CH) with rapidly pulsed near-infrared light emitting diodes (NIR LED) at 1.65 μm. The use of a microcontroller with a field programmable gate array (μC-FPGA) enables on-the-fly and wireless streaming and processing of large data streams (~2 Gbit/s).

Radiometric characterisation of light sources used in analytical chemistry - A review.

Light sources are an indispensable component of an overwhelmingly large number of analytical methods. Radiometric characterisation of light sources in analytical chemistry is therefore of fundamental importance. This review presents up to date knowledge on methods to characterise radiometric properties of light sources in terms of radiometric power, irradiance, brightness, luminous efficacy, luminous efficiency and emission spectra, all of which are crucial parameters for their use in analytical chemistry.

Distance-based paper device using polydiacetylene liposome as a chromogenic substance for rapid and in-field analysis of quaternary ammonium compounds.

This work presents an affordable distance-based microfluidic paper-based device (μPAD), using polydiacetylene (PDA) liposome as a chromogenic substance with a smartphone-based photo editor, for rapid and in-field analysis of quaternary ammonium compounds (QACs) (e.g., didecyldimethylammonium chloride (DDAC), benzyldimethyltetradecyl ammonium chloride (BAC), and cetylpyridinium chloride (CPC)).

Miniature and fully portable gradient capillary liquid chromatograph.

A robust, portable and miniature battery powered gradient capillary liquid chromatograph (total weight ∼2.7 kg, without battery ∼2.0 kg), with integrated microfluidic injection, column heating and high sensitivity low-UV absorbance detection is presented.

Paper-based sol-gel thin films immobilized cytochrome P450 for enzyme activity measurement.

Cytochrome P450 (CYP450), and in particular CYP3A4, is the most abundantly expressed CYP450 isozyme implicated in many drug-drug and medicinal plant-drug interactions. Therefore, incorporation of CYP3A4 enzyme screening at an early stage of drug discovery is preferable in order to avoid enzymatic interactions. Here we present for the first time a paper-based CYP3A4 immobilized sol-gel-derived a platform using resorufin benzyl ether as a fluorogenic enzyme substrate used to investigate enzyme activity.

One step multi-material 3D printing for the fabrication of a photometric detector flow cell.

Optical detection is the most common detection mode for many analytical assays. Photometric detection systems and their integration with analytical systems usually require several assembly parts and manual alignment of the capillary/tubing which affects sensitivity and repeatability. 3D printing is an innovative technology for the fabrication of integrated complex detection systems.

Ion-Exchange Based Immobilization of Chromogenic Reagents on Microfluidic Paper Analytical Devices.

Distance-based detection methods, as used in development of microfluidic paper analytical devices (μPADs), rely on the dynamic formation of a colored band along the length of the paper microfluidic channels. The color change is driven by the reaction of chromogenic reagents (typically water-insoluble) that are bound to the paper, thus not subject to being washed away by the sample flow along the detection channel. Here, we introduce the use of an anion-exchange filter paper (as a replacement for standard, unmodified filter paper) for distance-based detection in μPADs, in order to immobilize the water-soluble anionic reagents upon the paper detection channels based on ion-exchange interactions of the oppositely charged paper (protonated tertiary amine groups) and the anionic groups of the reagents.

Instrument-free argentometric determination of chloride via trapezoidal distance-based microfluidic paper devices.

Chloride (Cl) is an inorganic anion present in a broad range of samples (e.g. biological, environmental, food, water, etc.

Prospects of pulsed amperometric detection in flow-based analytical systems - A review.

Electrochemical (EC) detection techniques in flow-based analytical systems such as flow injection analysis (FIA), capillary electrophoresis (CE), and liquid chromatography (LC) have attracted continuous interest over the last three decades, leading to significant advances in EC detection of a wide range of analytes in the liquid phase. In this context, the unique advantages of pulsed amperometric detection (PAD) in terms of high sensitivity and selectivity, and electrode cleaning through the application of pulsed potential for noble metal electrodes (e.g.

High-throughput deposition of chemical reagents via pen-plotting technique for microfluidic paper-based analytical devices.

The deposition of chemical reagent inks on paper is a crucial step in the development and fabrication of microfluidic paper-based analytical devices (μPADs). A pen-plotting approach, delivering chemical ink deposition using technical pens filled with reagents and inserted into a desktop electronic plotter, is shown herein to be a versatile, low-cost, simple, rapid, reproducible, and high-throughput solution. The volume of the deposited ink was quantified gravimetrically, confirming that nanoliter volumes of reagents can be deposited reproducibly (e.

Comparison of cation-exchange capillary columns used for ion chromatographic separation of biogenic amines.

The selectivity for 15 biogenic amines and amino acids shown by three capillary cation-exchange columns, IonPac CS19, CS12A and CS17 (250 × 0.4 mm ID, all from Thermo Fisher Scientific), exhibiting medium, medium low and ultra-low hydrophobicity, and either carboxylic or mixed carboxylic/phosphonic acid functional groups, was investigated. A mixed mode retention mechanism was revealed with ion-exchange, hydrophobic and hydrogen bonding interactions contributing to retention of polar organic molecules on these phases.

High sensitivity deep-UV LED-based z-cell photometric detector for capillary liquid chromatography.

A new high sensitivity deep-UV LED photometric detector with a z-type flow cell (45 nL or 180 nL) for miniaturised and portable capillary liquid chromatography (LC) was designed and fabricated to overcome sensitivity limitations due to short pathlength in on-capillary detectors. The new detector has a 10 mm geometric pathlength and uses high intensity light-emitting diodes (LED) as light sources in the deep-UV range (254 nm and 280 nm). No optical reference was necessary due to the low drift in the signal.

In-capillary derivatization with fluorescamine for the rapid determination of adamantane drugs by capillary electrophoresis with UV detection.

In-capillary derivatization using fluorescamine as the labeling reagent was proposed to enhance the detectability of adamantine drugs (memantine, amantadine and rimantadine) by spectrophotometric detection. Fluorescamine and the drugs were delivered to the capillary electrophoresis instrument at a ratio of 10:1 by zone injection. The derivatization reaction occurred following the application of voltage (20 kV).