Advancing solar wastewater treatment: A photocatalytic process via green ZnO/g-CN coatings and concentrated sunlight - Comprehensive insights into ciprofloxacin antibiotic inactivation.

In this study, a sustainable method employing concentrated sunlight to achieve environmental remediation of wastewater, contaminated by Ciprofloxacin antibiotic (CIP), is thoroughly investigated. A green ZnO/g-CN nanocomposite (NC) is used as a photocatalyst coating on glass to investigate the inactivation of CIP in water, in a flow-reactor configuration at small-prototype scale (10 liters/h, catalyst area 187.5 cm).

Green solvents to enhance hydrochar quality and clarify effects of secondary char.

Several limitations hinder the industrial-scale implementation of hydrothermal carbonization (HTC) of biomass, especially the quality of as-carbonized hydrochar. This work investigates solvent extraction of hydrochars to enhance their potential applications. Hydrochars were produced at several HTC temperatures (190, 220, 250 °C) from cellulose and extracted using combinations of green polar solvents (ethyl acetate, acetone, and methanol).

Electrodeposited PEDOT/Nafion as Catalytic Counter Electrodes for Cobalt and Copper Bipyridyl Redox Mediators in Dye-Sensitized Solar Cells.

PEDOT-based counter electrodes for dye-sensitized solar cells (DSSCs) are generally prepared by electrodeposition, which produces polymer films endowed with the best electrocatalytic properties. This translates in fast regeneration of the redox mediator, which allows the solar cell to sustain efficient photoconversion. The sustainable fabrication of DSSCs must consider the scaling up of the entire process, and when possible, it should avoid the use of large amounts of hazardous and/or inflammable chemicals, such as organic solvents for instance.

Evaluation of the role of beam homogeneity on the mechanical coupling of laser-ablation-generated impulse.

The material emitted from a target surface during laser ablation generates a net thrust (propulsion) in the opposite direction. The momentum generation efficiency of this laser-driven propulsion is given by the mechanical coupling coefficient (). In this work, we considered nanosecond UV laser ablation of the aluminum 6061 alloy to study the behavior with different irradiating conditions.

Laser Ablation of Aluminum Near the Critical Regime: A Computational Gas-Dynamical Model with Temperature-Dependent Physical Parameters.

The complexity of the phenomena simultaneously occurring, from the very first instants of high-power laser pulse interaction with the target up to the phase explosion, along with the strong changes in chemical-physical properties of matter, makes modeling laser ablation a hard task, especially near the thermodynamic critical regime. In this work, we report a computational model of an aluminum target irradiated in vacuum by a gaussian-shaped pulse of 20 ns duration, with a peak intensity of the order of GW/cm2. This continuum model covers laser energy deposition and temperature evolution in the irradiated target, along with the mass removal mechanism involved, and the vaporized material expansion.

Wastewater remediation with ZnO photocatalysts: Green synthesis and solar concentration as an economically and environmentally viable route to application.

Green-synthesized materials and solar concentration technology for advanced oxidation processes (AOPs) offer important opportunities in water remediation by giving value to clean, renewable and potentially low-cost resources. Here, Zinc Oxide (ZnO) nanostructures (NSs) were prepared via a green synthesis method based on garlic bulbs (Allium Sativum) extract (ZnO-Green), resulting in crystalline (wurtzite) nanorods (NRs). ZnO nanoparticles (NPs) were also chemically prepared through a standard co-precipitation (ZnO-Chem) for comparative solar photocatalytic (PC) studies.

Rational Design Combining Morphology and Charge-Dynamic for Hematite/Nickel-Iron Oxide Thin-Layer Photoanodes: Insights into the Role of the Absorber/Catalyst Junction.

Water oxidation represents the anodic reaction in most of the photoelectrosynthetic setups for artificial photosynthesis developed so far. The efficiency of the overall process strongly depends on the joint exploitation of good absorber domains and interfaces with minimized recombination pathways. To this end, we report on the effective coupling of thin-layer hematite with amorphous porous nickel-iron oxide catalysts prepared via pulsed laser deposition.

Fast and Sensitive Detection of Paramagnetic Species Using Coupled Charge and Spin Dynamics in Strongly Fluorescent Nanodiamonds.

Sensing of a few unpaired electron spins, such as in metal ions and radicals, is a useful but difficult task in nanoscale physics, biology, and chemistry. Single negatively charged nitrogen-vacancy (NV) centers in diamond offer high sensitivity and spatial resolution in the optical detection of weak magnetic fields produced by a spin bath but often require long acquisition times on the order of seconds. Here, we present an approach based on coupled spin and charge dynamics in dense NV ensembles in strongly fluorescent nanodiamonds (NDs) to sense external magnetic dipoles.

Anomalous molecular infiltration in graphene laminates.

Graphene laminated (GL) coatings formed by stacked few layer graphene (FLG) nanocrystals were deposited on low-density polyethylene (PE) films by the mechanical rubbing technique. Molecular transport through the bilayer membrane was studied by the gas phase permeation technique by monitoring the CO2, N2 and 2H2 transport fluxes in transient conditions. The results evidenced that the transport exhibited anomalous character.

Roles of Vanadium and Nitrogen in Photocatalytic Activity of VN-Codoped TiO Photocatalyst.

In the present manuscript, we explore the VN-codoped TiO system intended to understand the role played by each dopant in synergistic enhancement in performance of TiO photocatalyst. The photocatalytic decomposition of organic pollutants in aqueous solution under visible light was used as a probe reaction to evaluate the performance of VN-codoped TiO samples with different V and N concentrations. An optical measurement of VN-codoped TiO shows considerable improved visible light absorption with increase in V-concentration as compared to increase in N concentration, which was due to the effective narrowing of the band gap by V-doping.

Co oxide nanostructures for electrocatalytic water-oxidation: effects of dimensionality and related properties.

A facile hydrothermal synthesis route was explored to obtain various nanostructures of Co oxide for applications in electrocatalytic water-splitting. The effect of reaction time and metal precursor ions on the morphology of synthesized nanostructures was studied in detail with the aid of a scanning electron microscope. By systematic optimization of the synthesis parameters, Co oxide nanostructures with single dimensionality were obtained in the form of 0D nanoparticles (NPs), 1D nanowires (NWs), 2D nanosheets (NSs) and 3D nanocrystals (NCs).

An all-optical single-step process for production of nanometric-sized fluorescent diamonds.

Nanodiamonds (NDs) containing negatively charged Nitrogen-Vacancy (NV) centers are promising materials for applications in photonics, quantum computing, and sensing of environmental parameters like temperature, strain and magnetic fields. However, the production of fluorescent NDs remains a technological challenge, requiring a complex multi-step process involving controlled introduction of substitutional nitrogen into the diamond lattice, annealing and fragmentation from macrocrystals to nanocrystals. Here, we report on a single-step, all-optical process for the production of nanometric-sized fluorescent diamonds based on laser ablation of a carbon substrate at low temperature (100 °C) under a nitrogen atmosphere.

XANES study of vanadium and nitrogen dopants in photocatalytic TiO thin films.

We report an X-ray absorption near edge structure (XANES) study of vanadium (V) and nitrogen (N) dopants in anatase TiO thin films deposited by radio-frequency magnetron sputtering. Measurements at the Ti K and V K edges were combined with soft X-ray experiments at the Ti L, O K and N K edges. Full potential ab initio spectral simulations of the V, O and N K-edges were carried out for different possible configurations of substitutional and interstitial dopant-related point defects in the anatase structure.

On the thermodynamic path enabling a room-temperature, laser-assisted graphite to nanodiamond transformation.

Nanodiamonds are the subject of active research for their potential applications in nano-magnetometry, quantum optics, bioimaging and water cleaning processes. Here, we present a novel thermodynamic model that describes a graphite-liquid-diamond route for the synthesis of nanodiamonds. Its robustness is proved via the production of nanodiamonds powders at room-temperature and standard atmospheric pressure by pulsed laser ablation of pyrolytic graphite in water.

Simulation of phase explosion in the nanosecond laser ablation of aluminum.

Hypothesis: Vaporization, spallation and phase explosion are considered to be the main mechanisms contributing to the nanosecond laser ablation of metals. The theory of homogeneous nucleation, together with the dynamics of target heating, allows a space-time resolved simulation of the phase explosion mechanism.

Methods: The thermal phenomena occurring at the target surface are studied within the framework of a thermodynamic continuum approach.

Free volumes and gas transport in polymers: amine-modified epoxy resins as a case study.

The CO2 transport process was studied in a series of amine-modified epoxy resins having different cross-linking densities but the same chemical environment for the penetrant molecules. Positron Annihilation Lifetime Spectroscopy (PALS) was used to monitor the free volume structure of the samples and experimentally evaluate their fractional free volume fh(T) and its temperature evolution. The analysis of the free volume hole size distribution showed that all the holes have a size large enough to accommodate the penetrant molecules at temperatures T above the glass transition temperature Tg.

Improvement of the electron collection efficiency in porous hematite using a thin iron oxide underlayer: towards efficient all-iron based photoelectrodes.

Different approaches have been explored to increase the water oxidation activity of nanostructured hematite (α-Fe2O3) photoanodes, including doping with various elements, surface functionalization with both oxygen evolving catalysts (OEC) and functional overlayers and, more recently, the introduction of ultrathin oxide underlayers as tunneling back contacts. Inspired by this latter strategy, we present here a photoanode design with a nanometric spin-coated iron oxide underlayer coupled with a mesoporous hematite film deposited by electrophoresis. The electrodes equipped with the thin underlayer exhibit a four-fold improvement in photoactivity over the simple hematite porous film, reaching a stable photocurrent density of ca.

Liquid nanodroplet formation through phase explosion mechanism in laser-irradiated metal targets.

Some quantitative aspects of laser-irradiated pure metals, while approaching phase explosion, are still not completely understood. Here, we develop a model that describes the main quantities regulating the liquid-vapor explosive phase transition and the expulsion of liquid nanodroplets that, by solidifying, give rise to nanoparticle formation. The model combines both a thermodynamics description of the explosive phase change and a Monte Carlo simulation of the randomly generated critical vapor bubbles.

Pulsed-laser deposition of nanostructured iron oxide catalysts for efficient water oxidation.

Amorphous iron oxide nanoparticles were synthesized by pulsed-laser deposition (PLD) for functionalization of indium-tin oxide surfaces, resulting in electrodes capable of efficient catalysis in water oxidation. These electrodes, based on earth-abundant and nonhazardous iron metal, are able to sustain high current densities (up to 20 mA/cm2) at reasonably low applied potential (1.64 V at pH 11.

Comprehensive studies on the interaction of copper nanoparticles with bovine serum albumin using various spectroscopies.

Copper nanoparticles (NPs) of average size of ~7.5nm were synthesized by chemical reduction method. Fluorescence spectroscopy in synchronous and polarization modes were used to examine the nature of interaction between Cu NPs and bovine serum albumin (BSA) at different temperatures.