Soil health improvement by inoculation of indigenous microalgae in saline soil.

Using biological methods to improve saline soils is recognized as an eco-friendly and sustainable way. In this study, two indigenous algae YJ-1 and YJ-2 screened from salinized farmland were inoculated into saline soils with different salinization levels to investigate their potential in enhancing soil health by laboratory microcosm experiment. The results showed that individual inoculation of the two algae quickly resulted in the formation of algal crusts, and the chlorophyll content in the saline soils gradually increased with the incubation time.

Highly efficient recovery of Zn/Cu from water by using hydrotalcite as crystal seeds.

The efficient and waste-free recovery of heavy metals is critical for heavy metal wastewater treatment. In this work, we explored how heavy metals can be recovered as valuable chemicals in the presence of crystal seeds. Hydrotalcite (one kind of layered double hydroxides (LDHs)) was used as crystal seeds to recover Zn in the presence of Al from water (i.

Microbial weathering of montmorillonite and its implication for Cd(II) immobilization.

Interactions between silicate bacteria and silicates are very common in nature and hold great potential in altering their mutual physicochemical properties. But their interactions in regulating contaminants remediation involving performance and mechanisms are often overlooked. Here, we focused on the interactions between silicate bacteria (Paenibacillus polymyxa, PP; Bacillus circulans, BC) and a soil silicate montmorillonite (Mt), and their impact on Cd(II) immobilization.

Tailoring hierarchical nanostructures of tannin acid/alginate beads for straightforward selective recovery of high-purity Au(0) from aqueous solution.

The utilization of biomass materials with functional properties and rational porous structures holds significant potential for the recovery of precious metals from secondary resources, while facing challenges in achieving rapid reduction and high recovery rates of metallic Au(0). Herein, a novel concept of achieving high-purity Au(0) efficiently by tailoring tannin acid (TA) architecture and porous structure of TA-functionalized alginate beads (P-TOSA). Optimized by structural engineering, the hierarchically nanostructured P-TOSA beads demonstrate exceptional selectivity and recovery capacity (756.

Interlayer Anions of Layered Double Hydroxides as Mobile Active Sites To Improve the Adsorptive Performance toward Cd.

Layered double hydroxides (LDHs) have been considered important sinks for ionic contaminants in nature and effectively engineered adsorbents for environmental remediation. The availability of interlayer active sites of LDHs is critical for their adsorptive ability. However, inorganic LDHs generally have a nano-confined interlayer space of ca.

Capturing effects of filamentous fungi Aspergillus flavus ZJ-1 on microalgae Chlorella vulgaris WZ-1 and the application of their co-integrated fungi-algae pellets for Cu(II) adsorption.

Using filamentous fungi to capture unicellular microalgae is an effective way for microalgae recovery in water treatment. Here, fungi Aspergillus flavus ZJ-1 and microalgae Chlorella vulgaris WZ-1 isolated from a copper tailings pond were used to study the capture effect of ZJ-1 on WZ-1. The highest capture efficiency (97.

Polypyrrole-Bentonite composite as a highly efficient and low cost anionic adsorbent for removing hexavalent molybdenum from wastewater.

The aim of current study was to develop a new material for the fast and efficient removal of hexavalent molybdenum (Mo(VI)) from contaminated water. In this work, a novel adsorbent was synthesized through the polypyrrole intercalation modification of bentonite (PPy-BT) via in-situ chemical polymerization method for effectively removal of Mo(VI) from aqueous solution. The surface morphology and chemical composition of PPy-BT composites were investigated by X-ray diffraction, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectrometer, scanning electron microscopy techniques and X-ray photoelectron spectroscopy.

Facile synthesis of Al/Fe bimetallic (oxyhydr)oxide-coated magnetite for efficient removal of fluoride from water.

In this work, we developed a novel magnetic bimetallic Al/Fe (oxyhydr)oxide adsorbent through a facile and cost-effective method and explored its potential to adsorb fluoride in water. Its synthesis involved corrosion of natural magnetite in aluminium chloride solution, followed by titration with NaOH solution for synthesis of Al/Fe (oxyhydr)oxide-coated magnetite (Mag@AlFe). Characterization data indicated a uniform coating of Al/Fe (oxyhydr)oxide on magnetite, and the resulting composite possessed large specific surface area (∼90 m/g) and good magnetic property.

Converting Spent Cu/Fe Layered Double Hydroxide into Cr(VI) Reductant and Porous Carbon Material.

Recycling solid waste as functional materials is important for both environmental remediation and resource recycling. This study attempts to recycle spent Cu/Fe layered double hydroxide (Cu/Fe-LDH) which is generated from the adsorption of dyes by converting to Cr(VI) reductant and porous carbon material. Results showed that the obtained reductant was mainly composed of Fe and Cu, and exhibited good reductive activity toward Cr(VI).

In situ hydrothermal synthesis of a novel hierarchically porous TS-1/modified-diatomite composite for methylene blue (MB) removal by the synergistic effect of adsorption and photocatalysis.

Hierarchically porous TS-1/modified-diatomite composites with high removal efficiency for methylene blue (MB) were prepared via a facile in situ hydrothermal route. The surface charge state of the diatomite was modified to enhance the electrostatic interactions, followed by in situ hydrothermal coating with TS-1 nanoparticles. The zeolite loading amount in the composites could be adjusted by changing the hydrothermal time.

From spent Mg/Al layered double hydroxide to porous carbon materials.

Adsorption has been considered as an efficient method for the treatment of dye effluents, but proper disposal of the spent adsorbents is still a challenge. This work attempts to provide a facile method to reutilize the spent Mg/Al layered double hydroxide (Mg/Al-LDH) after the adsorption of orange II (OII). Herein, the spent hybrid was carbonized under the protection of nitrogen, and then washed with acid to obtain porous carbon materials.