5-Fluorouracil Induced Hypertriglyceridemia During the Colorectal Cancer Treatment in a Patient With Multifactorial Chylomicronemia Syndrome: A Case Report.

Purpose: The case of a 47-year-old female patient who underwent sigmoidectomy for metastatic colorectal cancer is reported. Treatment with capecitabine and 5-fluorouracil induced severe hypertriglyceridemia repeatedly.

Methods: Based on laboratory tests and clinical evaluations, treatment was suggested by specialists.

Microstructure and physical properties of black-aluminum antireflective films.

The microstructure and physical properties of reflective and black aluminum were compared for layers of different thicknesses deposited by magnetron sputtering on fused silica substrates. Reflective Al layers followed the Volmer-Weber growth mechanism classically observed for polycrystalline metal films. On the contrary, the extra nitrogen gas used to deposit the black aluminum layers modified the growth mechanism and changed the film morphologies.

Facilitators and barriers to behavior change in overweight and obesity management using the COM-B model.

Introduction: Increasing overweight and obesity rates represent one of the global public health challenges. COM-B is a theoretical model used to identify areas to target to achieve behavior change. It identifies three factors that are needed for any behavior to occur: capability, opportunity, and motivation.

Structure of Complex Concentrated Alloys Derived from Iron Aluminide FeAl.

The phase structure and composition of a series of four alloys based on FeAl was investigated by means of scanning electron microscopy, X-ray diffraction and transmission electron microscopy. The materials were composed of Fe and Al with a fixed ratio of 3:1 alloyed with V, Cr and Ni at 8, 12, 15 and 20 at. % each (composition formula: Fe AlVCrNi).

Pathways to eating disorder care: A European multicenter study.

Background: The aim of this study was to assess barriers and facilitators in the pathways toward specialist care for eating disorders (EDs).

Methods: Eleven ED services located in seven European countries recruited patients with an ED. Clinicians administered an adapted version of the World Health Organization "Encounter Form," a standardized tool to assess the pathways to care.

Influence of domain walls thickness, density and alignment on Barkhausen noise emission in low alloyed steels.

This study deals with the characterization of low alloyed steels of different yield strengths (varying in the range of 235-1100 MPa) via Barkhausen noise emission. The study investigates the potential of this technique to distinguish among the low alloyed steels and all significant aspects contributing to Barkhausen noise, such as the residual stress state, microstructure expressed in terms of dislocation density, grain size, prevailing phase, as well as associated aspects of the domain wall substructure (domain wall thickness, energy, their spacing and density in the matrix). Barkhausen noise in the rolling as well as transversal direction grows along with the yield strength (up to 500 MPa) and the corresponding grain refinement of ferrite.

Novel Ultrafine-Grain Mg-Gd/Nd-Y-Ca Alloys with an Increased Ignition Temperature.

Two novel ignition-resistant magnesium alloys, Mg-2Gd-2Y-1Ca and Mg-2Nd-1Y-1Ca, were prepared in the ultrafine-grain condition by equal channel angular pressing (ECAP). In addition, four commercial alloys-AZ31, AX41, AE42 and WE43-were prepared similarly as a reference. The microstructure, mechanical properties and ignition temperature were thoroughly investigated.

Honoring the past and charting the future: The International Society of Psychiatric Mental Health Nurses' commitment to advance diversity and equity in mental health care.

For more than two decades, the International Society of Psychiatric Nurses has dedicated its efforts to improving mental health care services worldwide, focusing on leveraging the psychiatric nursing workforce and advocating to eradicate systemic health disparities. Part of this labor included creating a culturally centered initiative, the Position Statement on Diversity, Cultural Competence and Access to Mental Health Care to fortify the cultural awareness of ISPN members to improve health-care quality delivered to diverse individuals, families, and communities across the life span and to improve these populations' access to mental health care.

Concurrence of High Corrosion Resistance and Strength with Excellent Ductility in Ultrafine-Grained Mg-3Y Alloy.

In the field of magnesium-based degradable implantable devices, the Mg-Y-RE-Zr alloying system (WE-type) has gained popularity due to its satisfying degradation rate together with mechanical strength. However, utilization of RE and Zr in the WE-type alloys was originally driven to improve Mg-based alloys for high-temperature applications in the industry, while for medical purposes, there is a question of whether the amount of alloying elements may be further optimized. For this reason, our paper presents the Mg-3Y (W3) magnesium alloy as an alternative to the WE43 alloy.

Fatigue in an AZ31 Alloy Subjected to Rotary Swaging.

The magnesium AZ31 alloy was swaged with rotary pressure with the aim of redefining the microstructure and improving mechanical and fatigue properties. The rotary swaging process and subsequent ageing improved the yield stress in tension and compression. In the present study, the investigation was focused on fatigue behaviour.

Nutritional Treatment of Patients with Colorectal Cancer.

Colorectal cancer is one of the most common cancers in Europe and the world. Cancer treatments have side effects and cause significant deterioration of the patient's nutritional status. Patient malnutrition may worsen the health condition and prevent the deliberate effects of the therapy.

Magnetic Measurement of Zn Layer Heterogeneity on the Flange of the Steel Road Barrier.

This study deals with monitoring of Zn layer heterogeneity on the flange of steel road barriers using magnetic measurements. The Barkhausen noise technique is employed for such purpose, and parameters extracted from Barkhausen noise signals are correlated with the true thickness of the Zn layer. The true values of the Zn layer were obtained from the metallographic images, as well as the thickness gauge CM-8825FN (Guangzhou Landtek Instruments Co.

Analysis of Surface State after Turning of High Tempered Bearing Steel.

This paper investigates surface state after turning of the high tempered bearing steel 100Cr6 with a hardness of 40 HRC. White layer (WL) thickness and its microhardness, as well as surface roughness, are investigated as a function of tool flank wear as well as cutting speed . The mechanical and thermal load of the machined surface were analysed in order to provide a deeper insight into their superimposing contribution.

Development of polyester filters with polymer nanocomposite active layer for effective dye filtration.

Organic dyes such as methyl orange (MO) and methylene blue (MB) are widely used in different industries and have become one of the leading emerging water contaminants. The purpose of the current research is to develop new polymer nanocomposite filters for the effective elimination of the dyes, which are non-biodegradable and not efficiently removed by traditional treatment methods. New padded and covered filters were produced applying polystyrene-acrylic/ZnO nanocomposite on the polyester surface by blade coating and one-bath pad methods.

Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.

Aluminium steel clad materials have high potential for industrial applications. Their mechanical properties are governed by an intermetallic layer, which forms upon heat treatment at the Al-Fe interface. Transmission electron microscopy was employed to identify the phases present at the interface by selective area electron diffraction and energy dispersive spectroscopy.

Strain Hardening in an AZ31 Alloy Submitted to Rotary Swaging.

An extruded magnesium AZ31 magnesium alloy was processed by rotary swaging (RSW) and then deformed by tension and compression at room temperature. The work-hardening behaviour of 1-5 times swaged samples was analysed using Kocks-Mecking plots. Accumulation of dislocations on dislocation obstacles and twin boundaries is the deciding factor for the strain hardening.

The Effect of Different Thermal Treatment on the Allotropic fcc↔hcp Transformation and Compression Behavior of Polycrystalline Cobalt.

Pure polycrystalline cobalt is systematically thermally treated in order to assess the effect of the microstructure on the compression behavior. Isothermal annealing of the as-drawn material leads to recrystallization and grain growth dependent on the annealing temperature (600-1100 ∘C). Consequently, the yield strength decreases and the fracture strain increases as a function of rising grain size; the content of the residual fcc phase is ~6-11%.

Effect of Short Attritor-Milling of Magnesium Alloy Powder Prior to Spark Plasma Sintering.

The spark plasma sintering (SPS) technique was employed to prepare compacts from (i) gas-atomized and (ii) attritor-milled AE42 magnesium powder. Short attritor-milling was used mainly to disrupt the MgO shell covering the powder particles and, in turn, to enhance consolidation during sintering. Compacts prepared by SPS from the milled powder featured finer microstructures than compacts consolidated from gas-atomized powder (i.

Improving the care and health of populations through optimal use of clinical nurse specialists.

Patients with complex and chronic illnesses and those who have significant needs related to care coordination and transitions of care are dependent on access to healthcare providers who are skilled at meeting the distinct needs of these populations and are current in the latest evidence-based practices and guidelines. Clinical nurse specialists (CNSs) are uniquely qualified to care for patients with complex illnesses as well as having the skills to optimize care for entire populations with complex needs. The absence of consistent legislative advanced practice registered nurse recognition of CNSs prevents health care systems from optimal use of this advanced practice registered nurse role to improve and provide safe and quality care for these patients.

Magnesium Reinforced with Inconel 718 Particles Prepared Ex Situ-Microstructure and Properties.

Magnesium samples reinforced with 0.7, 1.4, and 2.

Depressive symptoms associated with physical health problems in midlife women: A longitudinal study.

Background: It is unclear if the relationship between depression and physical health problems in women is related to age, reproductive stage, obesity or socio-demographic risk factors.

Methods: Longitudinal data were obtained every 6 months for 36 months in 264 midlife African American, Caucasian and Latina women who began the study as healthy regularly menstruating 40 to 50-year-olds; 75 transitioned to peri- or post-menopause by 36 months. Scores of 16 or higher on the Center for Epidemiologic Studies-Depression (CES-D) scale were used to estimate depression risk.

Investigating the Microstructure and Mechanical Properties of Aluminum-Matrix Reinforced-Graphene Nanosheet Composites Fabricated by Mechanical Milling and Equal-Channel Angular Pressing.

Layered-graphene reinforced-metal matrix nanocomposites with excellent mechanical properties and low density are a new class of advanced materials for a broad range of applications. A facile three-step approach based on ultra-sonication for dispersion of graphene nanosheets (GNSs), ball milling for Al-powder mixing with different weight percentages of GNSs, and equal-channel angular pressing for powders' consolidation at 200 °C was applied for nanocomposite fabrication. The Raman analysis revealed that the GNSs in the sample with 0.

Mechanical and biocorrosive properties of magnesium-aluminum alloy scaffold for biomedical applications.

This study investigates the morphology, microstructure, compressive behavior, biocorrosion properties, and cytocompatibility of magnesium (Mg)-aluminum (Al) alloy (AE42) scaffolds for their potential use in biodegradable biomedical applications. Mg alloy scaffolds were successfully synthesized via a camphene-based freeze-casting process with precisely controlled heat treatment. The average porosity was approximately 52% and the median pore diameter was ∼13 μm.

Assessment of patient counselling on the common cold treatment at Slovak community pharmacies using mystery shopping.

Background: Up to now, there have been no data on patient counselling in the Slovak community pharmacies. The literature provides a wide range of activities for which mystery shopping methodology be used, including assessment of patient counselling.

Aims And Objectives: To assess patient counselling on the common cold treatment with OTC medicine containing zinc provided by Slovak community pharmacists.

Acoustic emission analysis of the compressive deformation of iron foams and their biocompatibility study.

We synthesized Fe foams using water suspensions of micrometric FeO powder by reducing and sintering the sublimated Fe oxide green body to Fe under 5% H/Ar gas. The resultant Fe foam showed aligned lamellar macropores replicating the ice dendrites. The compressive behavior and deformation mechanism of the synthesized Fe foam were studied using an acoustic emission (AE) method, with which we detected sudden localized structural changes in the Fe foam material.