Angularly offset multiline dispersive optical phased array enabling large field of view and plateau envelope.

We propose and demonstrate an angularly offset multiline (AOML) dispersive silicon nitride optical phased array (OPA) that enables efficient line beam scanning with an expanded field of view (FOV) and plateau envelope. The suggested AOML OPA incorporates multiline OPA units, which were seamlessly integrated with a 45° angular offset through a thermo-optic switch based on a multimode interference coupler, resulting in a wide FOV that combines three consecutive scanning ranges. Simultaneously, a periodic diffraction envelope rendered by the multiline OPA units contributes to reduced peak intensity fluctuation of the main lobe across the large FOV.

High-performance optical phased array for LiDARs demonstrated by monolithic integration of polymer and SiN waveguides.

Optical phased array (OPA) beam scanners for light detection and ranging (LiDAR) are proposed by integrating polymer waveguides with superior thermo-optic effect and silicon nitride (SiN) waveguides exhibiting strong modal confinement along with high optical power capacity. A low connection loss of only 0.15 dB between the polymer and SiN waveguides was achieved in this work, enabling a low-loss OPA device.

Monolithic integration of polymer waveguide phase modulators with silicon nitride waveguides using adiabatic transition tapers.

Polymer waveguide phase modulators (PMs) demonstrate high thermal confinement with outstanding thermo-optic properties and can provide stable low-power phase modulation in optical phased arrays (OPA). On the other hand, silicon nitride (SiN) waveguides produce stronger optical confinement with smaller waveguide core sizes than polymer waveguides and can handle high optical power without nonlinear effects. In this work, a high-performance PM was achieved by monolithic integration of a polymer waveguide and tapered SiN input and output waveguides.

Dispersive silicon-nitride optical phased array incorporating arrayed waveguide delay lines for passive line beam scanning.

As optical phased arrays (OPAs), used as solid-state beam scanning elements, swiftly stride towards higher efficiency and faster scanning speed, the line beam scanner is emerging as a viable substitute for its counterpart relying on point-beam-incorporated raster scanning. However, line-beam scanners require active phase shifters for beam scanning; thus, they consume more power and have complex device designs. This study proposes and demonstrates a dispersive silicon-nitride OPA that allows for passive wavelength-tuned steering of a line beam with an elongated vertical beamwidth.

Frequency Response of Thermo-Optic Phase Modulators Based on Fluorinated Polyimide Polymer Waveguide.

Polymer waveguide phase modulators exhibit stable low-power phase modulation owing to their exceptional thermal confinement and high thermo-optic effect, and thus, have the merit of thermal isolation between channels, which is crucial for an optical phased array (OPA) beam scanner device. In this work, a waveguide phase modulator was designed and fabricated based on a high-refractive-index fluorinated polyimide. The propagation loss of the polyimide waveguide and the temporal response of the phase modulator were characterized.

Fast-running beamforming algorithm for optical phased array beam scanners comprised of polymeric waveguide devices.

The phase error imposed in optical phased arrays (OPAs) for beam scanning LiDAR is unavoidable due to minute dimensional fluctuations that occur during the waveguide manufacturing process. To compensate for the phase error, in this study, a fast-running beamforming algorithm is developed based on the rotating element vector method. The proposed algorithm is highly suitable for OPA devices comprised of polymer waveguides, where thermal crosstalk between phase modulators is suppressed effectively, allowing for each phase modulator to be controlled independently.

Compact solid-state optical phased array beam scanners based on polymeric photonic integrated circuits.

Optical phased array (OPA) devices are being actively investigated to develop compact solid-state beam scanners, which are essential in fields such as LiDAR, free-space optical links, biophotonics, etc. Based on the unique nature of perfluorinated polymers, we propose a polymer waveguide OPA with the advantages of low driving power and high optical throughput. Unlike silicon photonic OPAs, the polymer OPAs enable sustainable phase distribution control during beam scanning, which reduces the burden of beamforming.

Polymeric tunable wavelength filter with two-stage cascaded tilted Bragg gratings.

Wavelength-division multiplexed optical communication systems used in 5G networks require tunable wavelength filters with narrow bandwidth for 100 GHz channel spacing, wide wavelength range to cover 16 channels, and a side mode suppression ratio (SMSR) exceeding 30 dB. To fabricate wavelength filters satisfying these specifications, tunable Bragg grating filters based on polymeric optical waveguides are proposed. The combination of mode-sorting waveguide and tilted Bragg grating enables the extraction of Bragg reflected signals to another path, without using an external circulator.

Temporal response of polymer waveguide beam scanner with thermo-optic phase-modulator array.

Solid-state light detection and ranging, capable of performing beam scanning without using any mechanical moving parts, requires a phase-modulator array. Polymers facilitate the fabrication of efficient phase modulators with low drive power, owing to their high thermo-optic (TO) effect and low thermal conductivity. We designed and fabricated a polymeric phase-modulator array and analyzed the temporal response of the TO phase modulator.

Silicon nitride optical phased array based on a grating antenna enabling wavelength-tuned beam steering.

An optical phased array (OPA) in silicon nitride (SiN) is conspicuously highlighted as a vital alternative to its counterpart in silicon. However, a limited number of studies have been conducted on this array in terms of wavelength-tuned beam steering. A SiN OPA has been proposed and implemented with a grating antenna that incorporated an array of shallow-etched waveguides, rendering wavelength-tuned beam steering along the longitudinal direction.

Optical Waveguide Tunable Phase Delay Lines Based on the Superior Thermo-Optic Effect of Polymer.

Strong thermo-optic effect of polymers is useful for fabricating tunable phase-delay devices with low power consumption and wide tuning range. However, if the temperature change is increased to extend the tuning range, an attenuation of the guided light is accompanied by the refractive index gradient across the waveguide core. For three different waveguide structures, in this study, the optimal structure of the device for a variable phase delay line was found by investigating the attenuation and interference phenomena accompanying phase modulation.

Bias-free optical current sensors based on quadrature interferometric integrated optics.

A reflective quadrature interferometer was constructed by integrating polymeric optical waveguide components, to demonstrate an optical current sensor that could operate without bias feedback control. In order to obtain two interference signals with a phase difference of 90°, half-wave and quarter-wave plates were inserted in the polymeric optical waveguide chip, and a polarization-dependent birefringence modulator was used for the initialization of the optical sensor, including detector gain adjustment. During the bias-free operation of the sensor, the measurement error was less than ± 0.

Polymer waveguide WDM channel selector operating over the entire C and L bands.

A tunable channel selector operating over both the C and L bands of wavelength-division-multiplexing optical network is proposed based on a thermo-optic tunable Bragg grating device in a polymer waveguide. A tilted Bragg grating cascaded with an asymmetric Y-branch waveguide effectively implements a small Bragg-reflection wavelength filter that does not require an external circulator. To increase the operating wavelength span of the channel selector, two Bragg gratings with different periods are fabricated on a single substrate for covering C and L bands, respectively.

Broadband integrated optic polarization splitters by incorporating polarization mode extracting waveguide.

A compact integrated optic polarization splitter is highly anticipated for polarization multiplexed optical communications, dual polarization optical sensors, single photon quantum signal processing, etc. In this work, we propose and demonstrate a polarization mode extracting device using a highly birefringent crosslinked liquid crystal polymer, reactive mesogen. The device includes the birefringent material inserted into a Y-branch optical waveguide to extract the TE polarized mode.

Integrated optic polarization splitter based on total internal reflection from a birefringent polymer.

An integrated optic polarization splitter with large fabrication tolerance and high reliability is required for optical signal processing in quantum-encrypted communication systems. A polarization splitter based on total internal reflection from a highly birefringent polymer-reactive mesogen-is proposed and demonstrated in this work. The device consists of a mode expander for reducing the wave vector distribution of the guided mode, and an interface with a large birefringence.

A Light Scattering Layer for Internal Light Extraction of Organic Light-Emitting Diodes Based on Silver Nanowires.

We propose and fabricate a random light scattering layer for light extraction in organic light-emitting diodes (OLEDs) with silver nanodots, which were obtained by melting silver nanowires. The OLED with the light scattering layer as an internal light extraction structure was enhanced by 49.1% for the integrated external quantum efficiency (EQE).

Integrated-optic current sensors with a multimode interference waveguide device.

Optical current sensors based on polarization-rotated reflection interferometry are demonstrated using polymeric integrated optics and various functional optical waveguide devices. Interferometric sensors normally require bias feedback control for maintaining the operating point, which increases the cost. In order to resolve this constraint of feedback control, a multimode interference (MMI) waveguide device is integrated onto the current-sensor optical chip in this work.

Tunable channel drop filters consisting of a tilted Bragg grating and a mode sorting polymer waveguide.

Optical wavelength filters with large tuning range and narrow bandwidth are crucial for enhancing the capability of WDM communication systems. A polymeric tunable filter for C-band, comprising a tilted Bragg grating and a mode sorting waveguide junction is proposed in this work. For dropping a certain wavelength signal, the tilted Bragg grating reflects an odd mode into an even mode and then the reflected even mode propagates towards an output port of the asymmetric Y-junction due to the mode sorting.

Integrated optic current transducers incorporating photonic crystal fiber for reduced temperature dependence.

Optical current transducers (OCT) are indispensable for accurate monitoring of large electrical currents in an environment suffering from severe electromagnetic interference. Temperature dependence of OCTs caused by its components, such as wave plates and optical fibers, should be reduced to allow temperature-independent operation. A photonic crystal fiber with a structural optical birefringence was incorporated instead of a PM fiber, and a spun PM fiber was introduced to overcome the temperature-dependent linear birefringence of sensing fiber coil.

Surface relief apodized grating tunable filters produced by using a shadow mask.

To produce a compact low-cost tunable filter required for WDM optical communications, a polymeric Bragg reflection filter with an apodized grating structure is proposed. A high-contrast polymeric waveguide is incorporated in order to obtain high reflectivity from a short Bragg grating. To overcome the bandwidth broadening, an apodized grating with a gradually changing depth of surface relief grating along the propagation direction is fabricated through the dry etching with a shadow mask.

Tunable channel-drop filters consisting of polymeric Bragg reflectors and a mode sorting asymmetric X-junction.

A tunable channel-drop filter as essential component for the wavelength-division-multiplexing optical communication system has been demonstrated, which is based on polymer waveguide Bragg reflectors. For an ordinary Bragg reflector, the filtered signal is reflected toward the input waveguide. Thus an external circulator is required to separate the filtered signal from the input port, though it increases the total footprint and cost.

Arrayed waveguide collimators for integrating free-space optics on polymeric waveguide devices.

Array-type optical devices are important for wavelength-division multiplexing optical communication system to achieve small footprint, mass production, and reliability. For fabricating transmitter module in an array configuration, it is difficult to achieve a passive alignment of isolator, collimating lens, and laser diode. To facilitate array isolator integration, a waveguide collimator is proposed in this work by using a low-contrast, large-core polymer waveguide.

Low-crosstalk high-density polymeric integrated optics incorporating self-assembled scattering monolayer.

Highly integrated optical components are strongly demanded because they enable wavelength-division multiplexing optical communication systems to achieve smaller footprints, lower power consumption, and enhanced reliability. Variable optical attenuator (VOA) arrays are often used with optical switches in cascaded form for reconfigurable optical add-drop multiplexer systems. Although VOAs and optical switches based on polymer waveguide technology are commercially available, it is still not viable to integrate these two array devices on a single chip because of significant interchannel crosstalk.

FDTD analysis of the light extraction efficiency of OLEDs with a random scattering layer.

The light extraction efficiency of OLEDs with a nano-sized random scattering layer (RSL-OLEDs) was analyzed using the Finite Difference Time Domain (FDTD) method. In contrast to periodic diffraction patterns, the presence of an RSL suppresses the spectral shift with respect to the viewing angle. For FDTD simulation of RSL-OLEDs, a planar light source with a certain spatial and temporal coherence was incorporated, and the light extraction efficiency with respect to the fill factor of the RSL and the absorption coefficient of the material was investigated.

Plastic optical touch panels for large-scale flexible display.

A plastic optical touch panel applicable for large-scale flexible display is demonstrated based on a vertical directional coupling between arrayed channel waveguides and a flexible planar waveguide. When a contact force is applied to the surface, the flexible planar waveguide is bent toward the channel waveguide, and then, the guided mode in the channel waveguide is coupled into the flexible planar waveguide, causing an output power drop. An index-matching liquid is used to fill the gap between the channel and the flexible planar waveguide in order to enhance the transparency of the waveguide touch panel.