Effect of ultrasonic activation on setting time, pH and calcium ion release, solubility, and chemical structure of calcium silicate sealers.

This study evaluated the setting time, pH, calcium ion release, solubility, and chemical structure of four calcium silicate sealers after ultrasonic activation (UA). Five sealers were evaluated: Sealer Plus (SP - control); Sealer Plus BC (SPBC), Bio C Sealers (BCS), Endosequence BC Sealer (EBC), and BioRoot RCS (BR). Ten groups were created based on the use or not of ultrasonic activation: SP; SP/UA; SPBC; SPBC/UA; BCS; BCS/UA; EBC; EBC/UA; BR; and BR/UA.

Sealing of pulp chamber dentin in endodontics: Influence of bond strategy and time-point application.

Context: Seal the dentin of the pulp chamber during endodontic treatment to avoid interfering with the restorative treatment performed afterward.

Aims: The aim was to evaluate the effect of three adhesive systems applied in different bonding strategies (etch-and-rinse, self-etch, and universal adhesive) and time-point application (immediately after the cavity access preparation or after endodontic obturation) on the hybrid layer formation and dentinal penetrability.

Materials And Methods: Forty-eight sound molars were randomly distributed into six groups ( = 10) according to the adhesive system used: Forty-eight sound molars were randomly distributed into six groups ( = 10) according to the adhesive system used and the time-point application: Adper Scotchbond Multi-purpose (AS), Clearfil SE (CF) and Scotchbond Universal (SU) in strategy of immediate endodontic sealing (IES) or delayed endodontic sealing (DES).

Delayed repair of the facial nerve and its negative impacts on nerve and muscle regeneration.

Background: In this experimental protocol, we evaluated the immediate and delayed repair of the buccal branch of the facial nerve (BBFN) with heterologous fibrin biopolymer (HFB) as a coaptation medium and the use of photobiomodulation (PBM), performing functional and histomorphometric analysis of the BBFN and perioral muscles.

Methods: Twenty-eight rats were divided into eight groups using the BBFN bilaterally (the left nerve was used for PBM), namely: G1 - control group, right BBFN (without injury); G2 - control group, left BBFN (without injury + PBM); G3 - Denervated right BBFN (neurotmesis); G4 - Denervated left BBFN (neurotmesis + PBM); G5 - Immediate repair of right BBFN (neurotmesis + HFB); G6 - Immediate repair of left BBFN (neurotmesis + HFB + PBM); G7 - Delayed repair of right BBFN (neurotmesis + HFB); G8 - Delayed repair of left BBFN (neurotmesis + HFB + PBM). Delayed repair occurred after two weeks of denervation.

Evaluation of bond strength in customizing fiber post using translucent resins photoactivated by different light-emitting diodes.

Aims: The objective of the study was to evaluate two translucent resin composite systems for customizing light-polymerized fiber posts with light-emitting diode (LED) curing units regarding adhesion using conventional cement at 24 h and 6 months.

Settings And Design: This was an experimental study.

Methods: Forty roots were prepared and divided into four groups ( = 10): ZV-Z350 resin and LED Valo; ZR-Z350 resin and LED Radii-Cal; OV-Opallis resin and LED Valo; and OR-Opallis resin and LED Radii-Cal.

Evaluation of different mechanical cleaning protocols associated with 2.5% sodium hypochlorite in the removal of residues from the post space.

Aims: This study evaluated the effectiveness of different mechanical protocols using rotary brush (RB), ultrasonic tip, and oscillatory system (OS) associated with 2.5% sodium hypochlorite (NaOCl) in the removal of residues and dentin permeability in the cervical and apical segments of the post space.

Settings And Design: Experimental study.

Influence of blue and violet LED and infrared laser on the temperature of bleaching protocols in different concentrations of hydrogen peroxide.

Background: The photo-acceleration of bleaching gels by lights has been extensively researched. However, the induced temperature increase during this process needs to be further evaluated to prevent damage to the dental pulp. Therefore, the objective of this study was to evaluate the surface and intrapulpal temperature kinetics of different concentrations of hydrogen peroxide (HP) gels photo-accelerated by blue or violet light and infrared laser.

Effects of alpha-tocopherol antioxidant on fracture strength and adhesion of endodontically treated teeth restored after dental bleaching.

This study evaluated the effect of different concentrations of alpha-tocopherol in gel form on fracture strength, hybrid layer formation, and microtensile bond strength of endodontically treated teeth bleached with 40% hydrogen peroxide (H O ). Sixty bovine incisors were randomized into one of six groups (n = 10 incisors per group) defined by the interventions carried out after endodontic treatment. In the control group, no additional intervention was carried out, while all teeth in the five intervention groups were bleached with 40% H O and subsequently treated with alpha-tocopherol at concentrations of 15% (15AT), 20% (20AT), or 25% (25AT), with 10% sodium ascorbate (10SA), or with nothing (40HP).

Influence of using different translucent composite resins for customizing fiber post on the bond strength of self-adhesive cement to root dentin.

This study evaluated the influence of different translucent resins (Z350 and Opallis) for customizing fiber posts and light-curing the cementation system using different LED equipment (V, Valo or R, Radii-Cal) on the bond strength and adhesive failure pattern at 24 h and 6 months. Eighty roots were prepared and divided into 4 groups (n=20): ZV (Z350 resin and LED Valo), ZR (Z350 resin and LED Radii-Cal), OV (Opallis resin and LED Valo), OR (Opallis resin and LED Radii-Cal). After post space preparation, the fiber post was customized and cemented with self-adhesive cement and light-curing using V or R LED equipment.

Formulations of NaOCl-based in liquid, gel form or with surfactants on dentin deproteinization before fiber post cementation.

The objective of the study was to evaluate the effects of dentin deproteinization protocols for post space using different formulations containing sodium hypochlorite before fiber post cementation with self-adhesive resinous cement. The groups were divided according to the irrigation protocol (DWC, SHS, SHT and SHG). The residue cleanliness, bond strength, adhesive failure pattern, and tag formation at the adhesive interface between the self-adhesive cement and the dentin were evaluated.

Fracture resistance and bonding performance after antioxidants pre-treatment in non-vital and bleached teeth.

This study aimed to evaluate the effect of antioxidant solutions on fracture strength and bonding performance in non-vital and bleached (38% hydrogen peroxide) teeth. One hundred and eighty dentin specimens were obtained, 60 for each test: fracture strength, hybrid layer thickness, and bond strength. The groups (n=10) were randomly composed according to post-bleaching protocol: REST - restoration, without bleaching; BL - bleaching + restoration; SA - bleaching, 10% sodium ascorbate solution, and restoration; AT - bleaching, 10% α-tocopherol solution, and restoration; CRAN - bleaching, 5% cranberry solution, and restoration; CAP - bleaching, 0.

Analysis of pH, calcium ion release, and energy dispersive spectroscopy of a bioceramic root canal dressing.

This study compared the pH and calcium ion release of calcium silicate- (Bio-C Temp) and calcium hydroxide-based (Ultracal XS) medications. Intracanal remnants of both medications were also evaluated using SEM-EDS after the removal protocol. Thirty-five bovine teeth were prepared.

Effect of sodium hypochlorite-based formulations on the adhesion interface after fiber post cementation.

The study evaluated the persistence of residues, bond strength and tags formation of a cementation system after post-space irrigation with different sodium hypochlorite-based irrigants. The groups were divided according to the irrigation protocol (DW: distilled water; SHS: sodium hypochlorite solution; SHG: sodium hypochlorite gel; and, SHT: sodium hypochlorite with surfactant). Forty roots (n=10) were used to evaluate the persistence of residues by scanning electron microscopy.

Fracture strength and hybrid layer formation of endodontically-treated teeth after dental bleaching photoactivated with violet LED.

Objective: To evaluate in vitro the effect of dental bleaching using high concentration hydrogen peroxide (HP) photoactivated with violet LED on fracture strength and hybrid layer formation.

Methods: forty endodontically-treated bovine teeth were randomized into four groups (n = 10): C - Control, HP - 35% hydrogen peroxide, HP-BL - 35% hydrogen peroxide photoactivated with blue LED, HP-VL - 35% hydrogen peroxide photoactivated with violet LED. Three bleaching sessions with an interval of 7 days between them were performed.

Anti-erosion effect of an experimental varnish on eroded dentin.

This in vitro study evaluated the effect of an experimental varnish containing 20% nano-hydroxyapatite (nHAP) associated with 5% stannous chloride (SnCl2) against erosive-abrasive wear on bovine dentin. Samples of bovine cervical dentin were pre-eroded (0.3% citric acid, pH 2.

Surface and intra-pulpal temperature variation during tooth whitening photoactivated with LED/laser.

This study evaluated the variation of surface and intra-pulpal temperature, during bleaching protocol, using LED/laser. The 35% (HP35), 15% (HP15) and 6% (HP6) gels were used associated with LED/laser applied every 1 min for 30 min in a human canine. The evaluation of surface temperature variation (∆Ts) was performed using a pHmeter and the intra-pulpal temperature variation (∆Ti) was performed using a digital thermometer, at times of 1-, 5-, 10- 15- and 30-min.

Effect of antioxidants after post-space irrigation on the adhesive interface of glass fiber post cementation.

Objective: This study evaluated the effects of antioxidants, 10% sodium ascorbate (SA) or 20% alpha-tocopherol (AT), after post-space irrigation with 2.5% sodium hypochlorite +17% EDTA (SH) or 1% peracetic acid (PA) on the adhesive interface after glass fiber post cementation.

Materials And Methods: Sixty bovine roots were endodontically treated.

Etch-and-rinse versus self-etch strategy of a universal adhesive in different application methods at the bonding interface of fiber post cementation.

Objective: To evaluate the effect of etch-and-rinse (ER) versus self-etch (SE) strategies of a universal adhesive applied with a manual brush (MB) or rotary brush (RB) on the bonding interface of fiber post cementation.

Methods: Forty bovine incisor roots were prepared and divided into four groups according to the methods of application and strategy of universal adhesive use (MB-ER, RB-ER, MB-SE and RB-SE). After 6 months, specimens from different thirds of the post space were evaluated of push-out strength, analysis of adhesive failure patterns, and extent of tags.

Microstructural effect of different concentrations of hydrogen peroxide photoactivated with LED/laser.

Background: The use of different concentrations of hydrogen peroxide (HP) photoactivated with LED/laser sources is common however, their influence on tooth structure is not yet fully elucidated. This study aimed to evaluate the pH, microhardness and surface roughness of different bleaching protocols photoactivated with LED/laser.

Methods: Forty bovine incisors were sectioned (7 × 7 × 2 mm) and randomized into four groups for analysis of pH (n = 5), microhardness and roughness (n = 10): HP35, HP6_L, HP15_L, HP35_L.

Effect of non-vital tooth bleaching photoactivated with blue or violet LED on color and microhardness.

Background: To evaluate the efficacy of dental bleaching protocols using 35% hydrogen peroxide photoactivated with violet LED on color and microhardness of endodontically treated teeth.

Methods: Forty specimens were selected and randomized into 4 groups (n = 10): C - Control, HP - 35% hydrogen peroxide, HP + BL - 35% hydrogen peroxide + blue LED, HP + VL - 35% hydrogen peroxide + violet LED. Three bleaching sessions were performed for each group.

Effect of aging and cementation systems on the bond strength to root dentin after fiber post cementation.

This study evaluated the effect of aging and cementation of fiber posts using glass ionomer and resin cements on push-out bond strength, failure mode, and resin tag formation. One hundred and twenty bovine incisors were used. After post-space preparation, the specimens were randomly allocated into 12 groups (n = 10) according to the cementation system used: GC - GC Gold Label Luting & Lining); RL - RelyX Luting 2; MC - MaxCem Elite; RU - RelyX U200 and the aging periods (24 hours, 6 months, and 12 months).

Effectiveness and color stability of non-vital dental bleaching photoactivated by violet LED on blood-stained teeth.

Background: Few studies have investigated the effect of violet LED irradiation associated or not with bleaching agents on blood-stained teeth. This in vitro study aimed to evaluate the whitening efficacy and color stability of non-vital dental bleaching using 35% hydrogen peroxide (HP) photoactivated with violet LED (VL) compared to 35% HP alone and 35% HP photoactivated with blue LED (BL).

Methods: Fifty bovine dental crowns were used to obtain specimens of 5 × 5 × 2 mm.

The Influence on Fracture Resistance of Different Composite Resins and Prefabricated Posts to Restore Endodontically Treated Teeth.

Recent formulations of resin-based composites have incorporated different combinations of materials. However, the mechanical and bonding behavior of these materials with intraradicular posts are unclear. This study aimed to evaluate the effect of light-cure and dual-cure resin composite posts on the fracture resistance of endodontically-treated teeth.

Effect of Curing Modes on the Mechanical Properties of Commercial Dental Resin-Based Composites: Comparison between Different LEDs and Microwave Units.

Resin-based composites (RBCs) have transformed restorative dentistry and its procedures. However, the characteristics of RBCs have been modified over the years to enhance the physical and chemical properties of the materials. This context raises the need for studies that evaluate whether the properties of the RBCs that are commercially available are clinically adequate with different curing modes.