Accelerated design of solid bio-based foams for plastics substitutes.

Biobased substitutes for plastics are a future necessity. However, the design of substitute materials with similar or improved properties is a known challenge. Here we show an example case of optimizing the mechanical properties of a fully biobased methylcellulose-fiber composite material.

A simple approach to produce hydrophobic biobased coatings using methylcellulose and organosolv lignin.

Substituting plastics with circular and sustainable alternatives has increasingly become a priority. Protective coatings, crucial components in numerous industries, are now in demand for biodegradable options to replace their plastic-based counterparts. Being one of nature's most abundant components, lignin remains underutilized, and this study focuses on investigating its potential for the production of biobased coatings.

Scalable method for bio-based solid foams that mimic wood.

Mimicking natural structures allows the exploitation of proven design concepts for advanced material solutions. Here, our inspiration comes from the anisotropic closed cell structure of wood. The bubbles in our fiber reinforced foam are elongated using temperature dependent viscosity of methylcellulose and constricted drying.

Modelling aerosol-based exposure to SARS-CoV-2 by an agent based Monte Carlo method: Risk estimates in a shop and bar.

Present day risk assessment on the spreading of airborne viruses is often based on the classical Wells-Riley model assuming immediate mixing of the aerosol into the studied environment. Here, we improve on this approach and the underlying assumptions by modeling the space-time dependency of the aerosol concentration via a transport equation with a dynamic source term introduced by the infected individual(s). In the present agent-based methodology, we study the viral aerosol inhalation exposure risk in two scenarios including a low/high risk scenario of a "supermarket"/"bar".

Impurity-induced nematic-isotropic transition of liquid crystals.

Complex fluids made of liquid crystals (LCs) and small molecules, surfactants, nanoparticles or 1D/2D nanomaterials show novel and interesting features, making them suitable materials for various applications starting from optoelectronics to biosensing. While these additives (impurities) introduce new features in the complex fluids, they may also alter the phase transition behaviour of LCs depending on the physiochemical properties of the added impurity. This article reports on the phase transition of 4-cyano-4'-alkylbiphenyl (nCB) LCs in the presence of an associative impurity, i.

Propagating bands of plastic deformation in a metal alloy as critical avalanches.

The plastic deformation of metal alloys localizes in the Portevin-Le Chatelier effect in bands of different types, including propagating, or type "A" bands, usually characterized by their width and a typical propagation velocity. This plastic instability arises from collective dynamics of dislocations interacting with mobile solute atoms, but the resulting sensitivity to the strain rate lacks fundamental understanding. Here, we show, by using high-resolution imaging in tensile deformation experiments of an aluminum alloy, that the band velocities exhibit large fluctuations.

Crossover from mean-field compression to collective phenomena in low-density foam-formed fiber material.

We study the compression of low-weight foam-formed materials made out of wood fibers. Initially the stress-strain behavior follows mean-field like response, related to the buckling of fiber segments as dictated by the random three-dimensional geometry. Our Acoustic Emission (AE) measurements correlate with the predicted number of segment bucklings for increasing strain.

Machine learning plastic deformation of crystals.

Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show, by employing machine learning techniques such as regression neural networks and support vector machines that deformation predictability evolves with strain and crystal size.

Crack growth and energy dissipation in paper.

Here, we follow the stable propagation of a roughening crack using simultaneously Digital Image Correlation and Infra-Red imaging. In a quasi-two-dimensional paper sample, the crack tip and ahead of that the fracture process zone follow the slowly, diffusively moving "hot spot" ahead of the tip. This also holds when the crack starts to roughen during propagation.

Nanoscale liquid crystal lubrication controlled by surface structure and film composition.

Liquid crystals have emerged as potential candidates for next-generation lubricants due to their tendency to exhibit long-range ordering. Here, we construct a full atomistic model of 4-cyano-4-hexylbiphenyl (6CB) nematic liquid crystal lubricants mixed with hexane and confined by mica surfaces. We explore the effect of the surface structure of mica, as well as lubricant composition and thickness, on the nanoscale friction in the system.

A surface topography analysis of the curling stone curl mechanism.

The curling motion of the curling stone on ice is well-known: if a small clockwise rotational velocity is imposed to the stone when it is released, in addition to the linear propagation velocity, the stone will curl to the right. A similar curl to the left is obtained by counter-clockwise rotation. This effect is widely used in the game to reach spots behind the already thrown stones, and the rotation also causes the stone to propagate in a more predictable fashion.

Effects of precipitates and dislocation loops on the yield stress of irradiated iron.

Plastic deformation of crystalline materials is governed by the features of stress-driven motion of dislocations. In the case of irradiated steels subject to applied stresses, small dislocation loops as well as precipitates are known to interfere with the dislocation motion, leading to an increased yield stress as compared to pure crystals. We study the combined effect of precipitates and interstitial glissile [Formula: see text] dislocation loops on the yield stress of iron, using large-scale three-dimensional discrete dislocation dynamics simulations.

Excitation Spectra in Crystal Plasticity.

Plastically deforming crystals exhibit scale-free fluctuations that are similar to those observed in driven disordered elastic systems close to depinning, but the nature of the yielding critical point is still debated. Here, we study the marginal stability of ensembles of dislocations and compute their excitation spectrum in two and three dimensions. Our results show the presence of a singularity in the distribution of excitation stresses, i.

Author Correction: Nanoscale control of competing interactions and geometrical frustration in a dipolar trident lattice.

The original version of this article contained an error in the legend to Figure 4. The yellow scale bar should have been defined as '~600 nm', not '~600 µm'. This has now been corrected in both the PDF and HTML versions of the article.

Nanoscale control of competing interactions and geometrical frustration in a dipolar trident lattice.

Geometrical frustration occurs when entities in a system, subject to given lattice constraints, are hindered to simultaneously minimize their local interactions. In magnetism, systems incorporating geometrical frustration are fascinating, as their behavior is not only hard to predict, but also leads to the emergence of exotic states of matter. Here, we provide a first look into an artificial frustrated system, the dipolar trident lattice, where the balance of competing interactions between nearest-neighbor magnetic moments can be directly controlled, thus allowing versatile tuning of geometrical frustration and manipulation of ground state configurations.

Irreversibility transition of colloidal polycrystals under cyclic deformation.

Cyclically loaded disordered particle systems, such as granular packings and amorphous media, display a non-equilibrium phase transition towards irreversibility. Here, we investigate numerically the cyclic deformation of a colloidal polycrystal with impurities and reveal a transition to irreversible behavior driven by the displacement of dislocations. At the phase transition we observe enhanced particle diffusion, system size effects and broadly distributed strain bursts.

Start-up inertia as an origin for heterogeneous flow.

For quite some time nonmonotonic flow curve was thought to be a requirement for shear banded flows in complex fluids. Thus, in simple yield stress fluids shear banding was considered to be absent. Recent spatially resolved rheological experiments have found simple yield stress fluids to exhibit shear banded flow profiles.

Interevent Correlations from Avalanches Hiding Below the Detection Threshold.

Numerous systems ranging from deformation of materials to earthquakes exhibit bursty dynamics, which consist of a sequence of events with a broad event size distribution. Very often these events are observed to be temporally correlated or clustered, evidenced by power-law-distributed waiting times separating two consecutive activity bursts. We show how such interevent correlations arise simply because of a finite detection threshold, created by the limited sensitivity of the measurement apparatus, or used to subtract background activity or noise from the activity signal.

Bursts of activity in collective cell migration.

Dense monolayers of living cells display intriguing relaxation dynamics, reminiscent of soft and glassy materials close to the jamming transition, and migrate collectively when space is available, as in wound healing or in cancer invasion. Here we show that collective cell migration occurs in bursts that are similar to those recorded in the propagation of cracks, fluid fronts in porous media, and ferromagnetic domain walls. In analogy with these systems, the distribution of activity bursts displays scaling laws that are universal in different cell types and for cells moving on different substrates.

Predicting sample lifetimes in creep fracture of heterogeneous materials.

Materials flow-under creep or constant loads-and, finally, fail. The prediction of sample lifetimes is an important and highly challenging problem because of the inherently heterogeneous nature of most materials that results in large sample-to-sample lifetime fluctuations, even under the same conditions. We study creep deformation of paper sheets as one heterogeneous material and thus show how to predict lifetimes of individual samples by exploiting the "universal" features in the sample-inherent creep curves, particularly the passage to an accelerating creep rate.

Thermodynamics of emergent magnetic charge screening in artificial spin ice.

Electric charge screening is a fundamental principle governing the behaviour in a variety of systems in nature. Through reconfiguration of the local environment, the Coulomb attraction between electric charges is decreased, leading, for example, to the creation of polaron states in solids or hydration shells around proteins in water. Here, we directly visualize the real-time creation and decay of screened magnetic charge configurations in a two-dimensional artificial spin ice system, the dipolar dice lattice.

Deformation and fracture of echinoderm collagen networks.

Collagen networks provide the main structural component of most tissues and represent an important ingredient for bio-mimetic materials for bio-medical applications. Here we study the mechanical properties of stiff collagen networks derived from three different echinoderms and show that they exhibit non-linear stiffening followed by brittle fracture. The disordered nature of the network leads to strong sample-to-sample fluctuations in elasticity and fracture strength.

Multiscale modeling of dislocation-precipitate interactions in Fe: From molecular dynamics to discrete dislocations.

The stress-driven motion of dislocations in crystalline solids, and thus the ensuing plastic deformation process, is greatly influenced by the presence or absence of various pointlike defects such as precipitates or solute atoms. These defects act as obstacles for dislocation motion and hence affect the mechanical properties of the material. Here we combine molecular dynamics studies with three-dimensional discrete dislocation dynamics simulations in order to model the interaction between different kinds of precipitates and a 1/2〈111〉{110} edge dislocation in BCC iron.

Avalanches in Wood Compression.

Wood is a multiscale material exhibiting a complex viscoplastic response. We study avalanches in small wood samples in compression. "Woodquakes" measured by acoustic emission are surprisingly similar to earthquakes and crackling noise in rocks and laboratory tests on brittle materials.