Electrostatic steering of thermal emission with active metasurface control of delocalized modes.

We theoretically describe and experimentally demonstrate a graphene-integrated metasurface structure that enables electrically-tunable directional control of thermal emission. This device consists of a dielectric spacer that acts as a Fabry-Perot resonator supporting long-range delocalized modes bounded on one side by an electrostatically tunable metal-graphene metasurface. By varying the Fermi level of the graphene, the accumulated phase of the Fabry-Perot mode is shifted, which changes the direction of absorption and emission at a fixed frequency.

Giant Modulation of Refractive Index from Picoscale Atomic Displacements.

It is shown that structural disorder-in the form of anisotropic, picoscale atomic displacements-modulates the refractive index tensor and results in the giant optical anisotropy observed in BaTiS, a quasi-1D hexagonal chalcogenide. Single-crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS chains along the c-axis, and threefold degenerate Ti displacements in the a-b plane. Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms.

Bulk Heterojunction Upconversion Thin Films Fabricated via One-Step Solution Deposition.

Upconversion of near-infrared light into the visible has achieved limited success in applications due to the difficulty of creating solid-state films with high external quantum efficiency (EQE). Recent developments have expanded the range of relevant materials for solid-state triplet-triplet annihilation upconversion through the use of a charge-transfer state sensitization process. Here, we report the single-step solution-processed deposition of a bulk heterojunction upconversion film using organic semiconductors.

Bioinspired Switchable Passive Daytime Radiative Cooling Coatings.

Passive daytime radiative cooling (PDRC) relies on simultaneous reflection of sunlight and radiation toward cold outer space. Current designs of PDRC coatings have demonstrated potential as eco-friendly alternatives to traditional electrical air conditioning (AC). While many features of PDRC have been individually optimized in different studies, for practical impact, it is essential for a system to demonstrate excellence in all essential aspects, like the materials that nature has created.

Colossal Optical Anisotropy from Atomic-Scale Modulations.

Materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g., in wave plates, polarizing beam splitters, etc.

Effect of Dust and Hot Spots on the Thermal Stability of Laser Sails.

Laser sails propelled by gigawatt-scale ground-based laser arrays have the potential to reach relativistic speeds, traversing the solar system in hours and reaching nearby stars in years. Here, we describe the danger interplanetary dust poses to the survival of a laser sail during its acceleration phase. We show through multiphysics simulations how localized heating from a single optically absorbing dust particle on the sail can initiate a thermal runaway process that rapidly spreads and destroys the entire sail.

Metasurface-Enhanced Mid-Infrared Spectrochemical Imaging of Tissues.

Label-free and nondestructive mid-infrared vibrational hyperspectral imaging is an essential tissue analysis tool, providing spatially resolved biochemical information critical to understanding physiological and pathological processes. However, the chemically complex and spatially heterogeneous composition of tissue specimens and the inherently weak interaction of infrared light with biomolecules limit the analytical performance of infrared absorption spectroscopy. Here, an advanced mid-infrared spectrochemical tissue imaging modality is introduced using metasurfaces that support strong surface-localized electromagnetic fields to capture quantitative molecular maps of large-area murine brain tissue sections.

Correcting thermal-emission-induced detector saturation in infrared spectroscopy.

We found that temperature-dependent infrared spectroscopy measurements (i.e., reflectance or transmittance) using a Fourier-transform spectrometer can have substantial errors, especially for elevated sample temperatures and collection using an objective lens.

Tuning carrier density and phase transitions in oxide semiconductors using focused ion beams.

We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide (ZnO) and vanadium dioxide (VO) as representatives, using a commercial focused ion beam (FIB) system. Using a Ga FIB and thermal annealing, we demonstrated variable doping of a wide-bandgap semiconductor, ZnO, achieving carrier concentrations from 10 cm to 10 cm. Using the same FIB without subsequent thermal annealing, we defect-engineered a correlated semiconductor, VO, locally modifying its insulator-to-metal transition (IMT) temperature by up to ∼25 °C.

Switchable Induced-Transmission Filters Enabled by Vanadium Dioxide.

An induced-transmission filter (ITF) uses an ultrathin metallic layer positioned at an electric-field node within a dielectric thin-film bandpass filter to select one transmission band while suppressing other bands that would have been present without the metal layer. We introduce a switchable mid-infrared ITF where the metal can be "switched on and off", enabling the modulation of the filter response from a single band to multiband. The switching is enabled by the reversible insulator-to-metal phase transition of a subwavelength film of vanadium dioxide (VO).

Hyperspectral interference tomography of nacre.

Structural characterization of biologically formed materials is essential for understanding biological phenomena and their enviro-nment, and for generating new bio-inspired engineering concepts. For example, nacre-the inner lining of some mollusk shells-encodes local environmental conditions throughout its formation and has exceptional strength due to its nanoscale brick-and-mortar structure. This layered structure, comprising alternating transparent aragonite (CaCO) tablets and thinner organic polymer layers, also results in stunning interference colors.

Vapor condensation with daytime radiative cooling.

A radiative vapor condenser sheds heat in the form of infrared radiation and cools itself to below the ambient air temperature to produce liquid water from vapor. This effect has been known for centuries, and is exploited by some insects to survive in dry deserts. Humans have also been using radiative condensation for dew collection.

Infrared Polarizer Based on Direct Coupling to Surface Plasmon Polaritons.

We propose a new type of reflective polarizer based on polarization-dependent coupling to surface plasmon polaritons (SPPs) from free space. This inexpensive polarizer is relatively narrowband but features an extinction ratio of up to 1000 with efficiency of up to 95% for the desired polarization (numbers from a calculation) and thus can be stacked to achieve extinction ratios of 10 or more. As a proof of concept, we experimentally realized a polarizer based on nanoporous aluminum oxide that operates around a wavelength of 10.

How to organize an online conference.

The first online-only meeting in photonics, held on 13 January 2020, was a resounding success, with 1100 researchers participating remotely to discuss the latest advances in photonics. Here, the organizers share their tips and advice on how to organize an online conference.

Temperature-independent thermal radiation.

Thermal emission is the process by which all objects at nonzero temperatures emit light and is well described by the Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and noncontact thermometry. Here, we demonstrated ultrathin thermal emitters that violate this one-to-one relationship via the use of samarium nickel oxide (SmNiO), a strongly correlated quantum material that undergoes a fully reversible, temperature-driven solid-state phase transition.

Nanosecond mid-infrared pulse generation via modulated thermal emissivity.

We demonstrate the generation of nanosecond mid-infrared pulses via fast modulation of thermal emissivity enabled by the absorption of visible pump pulses in unpatterned silicon and gallium arsenide. The free-carrier dynamics in these materials result in nanosecond-scale modulation of thermal emissivity, which leads to nanosecond pulsed thermal emission. To our knowledge, the nanosecond thermal-emissivity modulation in this work is three orders of magnitude faster than what has been previously demonstrated.

Nanophotonic engineering of far-field thermal emitters.

Thermal emission is a ubiquitous and fundamental process by which all objects at non-zero temperatures radiate electromagnetic energy. This process is often assumed to be incoherent in both space and time, resulting in broadband, omnidirectional light emission toward the far field, with a spectral density related to the emitter temperature by Planck's law. Over the past two decades, there has been considerable progress in engineering the spectrum, directionality, polarization and temporal response of thermally emitted light using nanostructured materials.

Single-shot on-chip spectral sensors based on photonic crystal slabs.

Miniaturized spectrometers have significant potential for portable applications such as consumer electronics, health care, and manufacturing. These applications demand low cost and high spectral resolution, and are best enabled by single-shot free-space-coupled spectrometers that also have sufficient spatial resolution. Here, we demonstrate an on-chip spectrometer that can satisfy all of these requirements.

Design considerations for the enhancement of human color vision by breaking binocular redundancy.

To see color, the human visual system combines the response of three types of cone cells in the retina-a compressive process that discards a significant amount of spectral information. Here, we present designs based on thin-film optical filters with the goal of enhancing human color vision by breaking its inherent binocular redundancy, providing different spectral content to each eye. We fabricated a set of optical filters that "splits" the response of the short-wavelength cone between the two eyes in individuals with typical trichromatic vision, simulating the presence of approximately four distinct cone types.

Giant Hall Photoconductivity in Narrow-Gapped Dirac Materials.

Carrier dynamics acquire a new character in the presence of Bloch-band Berry curvature, which naturally arises in gapped Dirac materials (GDMs). Here, we argue that photoresponse in GDMs with small band gaps is dramatically enhanced by Berry curvature. This manifests in a giant and saturable Hall photoconductivity when illuminated by circularly polarized light.

Active Optical Metasurfaces Based on Defect-Engineered Phase-Transition Materials.

Active, widely tunable optical materials have enabled rapid advances in photonics and optoelectronics, especially in the emerging field of meta-devices. Here, we demonstrate that spatially selective defect engineering on the nanometer scale can transform phase-transition materials into optical metasurfaces. Using ion irradiation through nanometer-scale masks, we selectively defect-engineered the insulator-metal transition of vanadium dioxide, a prototypical correlated phase-transition material whose optical properties change dramatically depending on its state.

Achromatic Metasurface Lens at Telecommunication Wavelengths.

Nanoscale optical resonators enable a new class of flat optical components called metasurfaces. This approach has been used to demonstrate functionalities such as focusing free of monochromatic aberrations (i.e.