Self-Phosphorylated Polybenzimidazole: An Environmentally Friendly and Economical Approach for Hydrogen/Air High-Temperature Polymer-Electrolyte Membrane Fuel Cells.

The development of phosphorylated polybenzimidazoles (PBI) for high-temperature polymer-electrolyte membrane (HT-PEM) fuel cells is a challenge and can lead to a significant increase in the efficiency and long-term operability of fuel cells of this type. In this work, high molecular weight film-forming pre-polymers based on ,-bis(3-methoxyphenyl)-1,2,4,5-benzenetetramine and [1,1'-biphenyl]-4,4'-dicarbonyl dichloride were obtained by polyamidation at room temperature for the first time. During thermal cyclization at 330-370 °C, such polyamides form -methoxyphenyl substituted polybenzimidazoles for use as a proton-conducting membrane after doping by phosphoric acid for H/air HT-PEM fuel cells.

Hybrid Silver-Containing Materials Based on Various Forms of Bacterial Cellulose: Synthesis, Structure, and Biological Activity.

Sustained interest in the use of renewable resources for the production of medical materials has stimulated research on bacterial cellulose (BC) and nanocomposites based on it. New Ag-containing nanocomposites were obtained by modifying various forms of BC with Ag nanoparticles prepared by metal-vapor synthesis (MVS). Bacterial cellulose was obtained in the form of films (BCF) and spherical BC beads (SBCB) by the GH-1/2008 strain under static and dynamic conditions.

New Titanium(IV)-Alkoxide Complexes Bearing Bidentate OO Ligand with the Camphyl Linker as Catalysts for High-Temperature Ethylene Polymerization and Ethylene/1-Octene Copolymerization.

In order to increase the thermal stability of olefin polymerization precatalysts, new titanium(IV) complexes with diolate ligands differing in the degree of steric hindrances were synthesized from readily available precursor (±)camphor. The structures of the complexes were established by X-ray diffraction. Complexes in the presence of an activator {EtAlCl + BuMg} catalyzed the synthesis of UHMWPE with an M up to 10 million and a productivity of up to 3300 kg/mol·atm·h.

Effect of Activator and Outgoing Ligand Nature on the Catalytic Behavior of Bis(phenoxy-imine) Ti(IV) Complexes in the Polymerization of Ethylene and Its Copolymerization with Higher Olefins.

A series of bis(phenoxy-imine) (FI) titanium(IV) and zirconium(IV) complexes have been synthesized. The effect of the nature of the activator (MAO, combinations EtAlCl + BuMg and iBuAl + [PhC][B(CF)]) on the catalytic activity and properties of the resulting polymers was studied. It was found that Ti-Fi complexes, despite the nature of the outgoing ligands (Cl or iPrO) in the presence of Al/Mg activators, effectively catalyze the polymerization of ethylene (with the formation of UHMWPE); copolymerization of ethylene with 1-octene (with the formation of ultra-high molecular weight copolymers); and the ternary copolymerization of ethylene, propylene and 5-vinyl-2-norbornene (with the formation of polyolefin elastomers).

Star-Shaped Polydimethylsiloxanes with Organocyclotetrasilsesquioxane Branching-Out Centers: Synthesis and Properties.

New non-crystallizable low-dispersity star-shaped polydimethylsiloxanes (PDMS) containing stereoregular -tetra(organo)(dimethylsiloxy)cyclotetrasiloxanes containing methyl-, tolyl- and phenyl-substituents at silicon atoms and the mixture of four stereoisomers of tetra[phenyl(dimethylsiloxy)]cyclotetrasiloxane as the cores were synthesized. Their thermal and viscous properties were studied. All synthesized compounds were characterized by a complex of physicochemical analysis methods: nuclear magnetic resonance (NMR), FT-IR spectroscopy, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), viscometry in solution, rheometry, and Langmuir trough study.

A Versatile Equilibrium Method for the Synthesis of High-Strength, Ladder-like Polyphenylsilsesquioxanes with Finely Tunable Molecular Parameters.

A versatile equilibrium method for synthesizing ladder-like polyphenylsilsesquioxanes (L-PPSQs) with various molecular weights (from 4 to 500 kDa) in liquid ammonia was developed. The effect of diverse parameters, such as temperature, monomer concentration, reaction time, addition or removal of water from the reaction medium, on the polycondensation process was determined. The molecular weight characteristics and structure of the L-PPSQ elements obtained were determined by GPC, H, Si NMR, IR spectroscopy, viscometry, and PXRD methods.

Structure-Property Relationship on the Example of Gas Separation Characteristics of Poly(Arylene Ether Ketone)s and Poly(Diphenylene Phtalide).

Three poly(arylene ether ketone)s (PAEKs) with propylidene (C1, C2) and phtalide (C3) fragments, and one phtalide-containing polyarylene (C4), were synthesized. Their chemical structures were confirmed via H NMR, C NMR and F NMR spectroscopy. The polymers have shown a high glass transition temperature (>155 °C), excellent film-forming properties, and a high free volume for this polymer type.

Cellulose-Based Hydrogels and Aerogels Embedded with Silver Nanoparticles: Preparation and Characterization.

The paper presents the preparation and characterization of novel composite materials based on microcrystalline cellulose (MCC) with silver nanoparticles (Ag NPs) in powder and gel forms. We use a promising synthetic conception to form the novel composite biomaterials. At first MCC was modified with colloidal solution of Ag NPs in isopropyl alcohol prepared via metal vapor synthesis.

Multiarm Star-Shaped Polydimethylsiloxanes with a Dendritic Branching Center.

New multiarm stars have been synthesized based on polylithium derivatives of high-generation carbosilane dendrimers. In the synthesis of multiarm stars based on the eighth-generation dendrimer, steric hindrances were observed even during the synthesis of a polylithium initiator. Subsequently, this led to chain transfer reactions between growing arms, as well as other side effects.

Solid-state 1D → 3D transformation of polynitrile-based coordination polymers by dehydration reaction.

In crystal structures of two chain coordination polymers [M(tcnopr3OH)(HO)] (M = Ni and Co; tcnopr3OH = [(NC)CC(O(CH)OH)C(CN)]) based on a N,O or N,N'-bridge polynitrile ligand, the parallel chains are connected via, respectively, C[triple bond, length as m-dash]NH-O and O-HO hydrogen bonds between uncoordinated functional groups of the ligand and coordinated water molecules. Upon heating, both solids undergo dehydration accompanied by degradation of their single crystals. Powder X-ray diffraction showed that non-isostructural triclinic single crystals transformed to isostructural monoclinic compounds.

A Novel Ziegler⁻Natta-Type Catalytic System-TiCl₄/2,2'-Dimethoxy-1,1'-Binaphthalene/Et₃Al₂Cl₃/Bu₂Mg for Production of Ultrahigh Molecular Weight Polyethylene Nascent Reactor Powders, Suitable for Solvent-Free Processing.

A series of ultrahigh molecular weight polyethylenes with viscosity-average molecular weights in the range of 1.6⁻5.6 × 10⁶ have been prepared by using a novel Ziegler⁻Natta-type catalytic system-TiCl₄/2,2'-dimethoxy-1,1'-binaphthalene/Et₃Al₂Cl₃/Bu₂Mg at different temperatures () in the range between 10 and 70 °C in toluene.

Titanium(III, IV)-Containing Catalytic Systems for Production of Ultrahigh Molecular Weight Polyethylene Nascent Reactor Powders, Suitable for Solventless Processing-Impact of Oxidation States of Transition Metal.

Catalytic systems containing TiCl₄ or TiCl₃, THF, organomagnesium (-Bu₂Mg) and organoaluminum compounds capable of producing ultrahigh molecular weight polyethylene (UHMWPE) were developed. The resulting polymers were characterized by a molecular weight in the range of (1.8⁻7.

Solid-State Reactions of Eicosaborate [B H ] Salts and Complexes.

A series of salts and complexes containing trans- and iso-isomers of octadecahydro-eicosaborate [B H ] dianion is synthesized and characterized using FTIR and B NMR spectroscopies and X-ray diffraction techniques. Both isomers are found to act as four-, bi-, or zero-dentate ligands in reactions with copper(II), silver(I), and lead(II) through apical and/or equatorial boron atoms. Solid-state photo- and thermoinitiated reactions of octadecahydro-eicosaborate isomerization and solvent cleavage occurring in these compounds in a single-crystal-to-single-crystal manner are studied in situ.

Triphenylamine-Based Push-Pull Molecule for Photovoltaic Applications: From Synthesis to Ultrafast Device Photophysics.

Small push-pull molecules attract much attention as prospective donor materials for organic solar cells (OSCs). By chemical engineering, it is possible to combine a number of attractive properties such as broad absorption, efficient charge separation, and vacuum and solution processabilities in a single molecule. Here we report the synthesis and early time photophysics of such a molecule, TPA-2T-DCV-Me, based on the triphenylamine (TPA) donor core and dicyanovinyl (DCV) acceptor end group connected by a thiophene bridge.

A New Volume-Based Approach for Predicting Thermophysical Behavior of Ionic Liquids and Ionic Liquid Crystals.

Volume-based prediction of melting points and other properties of ionic liquids (ILs) relies on empirical relations with volumes of ions in these low-melting organic salts. Here we report an accurate way to ionic volumes by Bader's partitioning of electron densities from X-ray diffraction obtained via a simple database approach. For a series of 1-tetradecyl-3-methylimidazolium salts, the volumes of different anions are found to correlate linearly with melting points; larger anions giving lower-melting ILs.

Stabilization of 1T-MoS₂ Sheets by Imidazolium Molecules in Self-Assembling Hetero-layered Nanocrystals.

We report a facile, room-temperature assembly of MoS2-based hetero-layered nanocrystals (NCs) containing embedded monolayers of imidazolium (Im), 1-butyl-3-methylimidazolium (BuMeIm), 2-phenylimidazolium, and 2-methylbenzimidazolium molecules. The NCs are readily formed in water solutions by self-organization of the negatively charged, chemically exfoliated 0.6 nm thick MoS2 sheets and corresponding cationic imidazole moieties.

Synthesis and Temperature-Induced Structural Phase and Spin Transitions in Hexadecylboron-Capped Cobalt(II) Hexachloroclathrochelate and Its Diamagnetic Iron(II)-Encapsulating Analogue.

Template condensation of dichloroglyoxime with n-hexadecylboronic acid on the corresponding metal ion as a matrix under vigorous reaction conditions afforded n-hexadecylboron-capped iron and cobalt(II) hexachloroclathrochelates. The complexes obtained were characterized using elemental analysis, MALDI-TOF mass spectrometry, IR, UV-vis, (1)H and (13)C{(1)H} NMR, (57)Fe Mössbauer spectroscopies, SQUID magnetometry, electron paramagnetic resonance, and cyclic voltammetry (CV) and by X-ray crystallography. The multitemperature single-crystal X-ray diffraction, SQUID magnetometry, and differential scanning calorimetry experiments were performed to study the temperature-induced spin-crossover [for the paramagnetic cobalt(II) complex] and the crystal-to-crystal phase transitions (for both of these clathrochelates) in the solid state.

Highly flexible molecule "Chameleon": reversible thermochromism and phase transitions in solid copper(II) diiminate Cu[CF3-C(NH)-CF═C(NH)-CF3]2.

Three thermochromic phases (α, green; β, red; γ, yellow) and six polymorphic modifications (α(1), monoclinic, P2(1)/n, Z = 2; β(1), monoclinic, P2(1)/c, Z = 4; β(2), triclinic, P1[overline], Z = 4; β(3), monoclinic, P2(1)/n, Z = 4; γ(1) and γ(2), tetragonal, P4(2)/n, Z = 4) have been found and structurally characterized for copper(II) diiminate Cu[CF(3)-C(NH)-CF═C(NH)-CF(3)](2) (1). The α phase is stable under normal conditions, whereas the high-temperature β and γ phases are metastable at room temperature and transform slowly into the more stable α phase over several days or even weeks. X-ray diffraction study revealed that the title molecules adopt different conformations in the α, β, and γ phases, namely, staircase-like, twisted, and planar, respectively.

Tris-cis-tris-trans-dodeca[organo(dimethylorganosiloxy)]cyclododecasiloxanes {RSi(O)[OSiMe2R']}12. Self-ordering features.

The molecular order and thermotropic transitions of tris-cis-tris-trans-dodeca- [organo(dimethylorganosiloxy)]cyclododecasiloxanes {RSi(O)[OSiMe(2)R']}(12) (R = Ph, R' = Me, CH(2)Cl, Vi; R = Me, Et, Vi, R' = Me) have been investigated using differential scanning calorimetry, thermogravimetric analysis, and X-ray scattering. The cyclododecasiloxanes with phenyl side groups (R = Ph) can form mesomorphic structures within a very wide temperature range. Compounds with R = Me and Vi are liquids and exhibit microphase separation above their glass transition temperature because of the different nature and structure of the organic R and trimethylsiloxy OSiMe(3) side groups.