Lignin-rich sulfated wood nanofibers as high-performing adsorbents for the removal of lead and copper from water.

Lignin-rich wood nanofibers (WNFs) were investigated as adsorbents for heavy metals. Lignin-free cellulose nanofibers (CNFs) produced from bleached cellulose fibers were used as a reference. Two raw materials were used to produce WNFs: groundwood pulp as industrially produced wood fibers and sawdust as an abundantly available low-value industrial side stream.

Hybrid films of cellulose nanofibrils, chitosan and nanosilica-Structural, thermal, optical, and mechanical properties.

Organic-inorganic hybrid films were fabricated from cellulose nanofibrils (CNF) and nanosilica (5-30% wt) embedded in a chitosan (Chi) biopolymer matrix using a slow evaporation method. The self-standing films exhibited high strength and modulus up to 120 ± 5 MPa and 7.5 ± 0.

Highly Transparent Nanocomposites Based on Poly(vinyl alcohol) and Sulfated UV-Absorbing Wood Nanofibers.

Unbleached lignocellulose fibers were studied for the fabrication of wood-based UV-absorbing nanofibers and were used to produce transparent nanocomposites. Groundwood pulp (GWP) and sawdust were selected as raw materials thanks to their low processing degree of fibers and abundant availability as a low-value industrial side stream. Both materials were first sulfated using a reactive deep eutectic solvent.

Emulsion Stabilization with Functionalized Cellulose Nanoparticles Fabricated Using Deep Eutectic Solvents.

In this experiment, the influence of the morphology and surface characteristics of cellulosic nanoparticles (i.e., cellulose nanocrystals [CNCs] and cellulose nanofibers [CNFs]) on oil-in-water (/) emulsion stabilization was studied using non-modified or functionalized nanoparticles obtained following deep eutectic solvent (DES) pre-treatments.

A fast method to prepare mechanically strong and water resistant lignocellulosic nanopapers.

This study covers a green method to prepare hybrid lignocellulosic nanopapers by combining wood nanofibres (WNFs) and cellulose nanofibres (CNFs). The WNFs and CNFs behave synergistically to compensate for the drawbacks of each other resulting in enhanced hybrid nanopapers. The draining time of hybrid nanopapers was improved by up to 75% over CNF nanopaper, and the mechanical properties, modulus, strength and elongation, were respectively improved up to 35%, 90% and 180% over WNF nanopaper.

Acidic Deep Eutectic Solvents As Hydrolytic Media for Cellulose Nanocrystal Production.

In this study, a new method to fabricate cellulose nanocrystals (CNCs) based on DES pretreatment of wood cellulose fibers with choline chloride and organic acids are reported. Oxalic acid (anhydrous and dihydrate), p-toluenesulfonic acid monohydrate, and levulinic acid were studied as acid components of DESs. DESs were formed at elevated temperatures (60-100 °C) by combining choline chloride with organic acids and were then used to hydrolyze less ordered amorphous regions of cellulose.

Amino-modified cellulose nanocrystals with adjustable hydrophobicity from combined regioselective oxidation and reductive amination.

The controlled revision of surface properties to alter the hydrophobic features of nanocellulose is a potential technique to obtain materials for many novel applications and to replace oil-based materials acting as amphiphilic polyelectrolytes, among others. In this study, linear amines with increasing chain length were used to adjust the hydrophobicity of amphiphilic cellulose nanocrystals (CNCs). Methyl-, ethyl-, n-propyl-, n-butyl-, n-pentylamine, and n-hexylamine were introduced into a cellulose backbone using combined periodate oxidation and reductive amination in an aqueous environment.

Composite Films of Poly(vinyl alcohol) and Bifunctional Cross-linking Cellulose Nanocrystals.

Long and flexible cellulose nanofibrils or stiff and short cellulose nanocrystals (CNCs) are both promising lightweight materials with high strength and the potential to serve as reinforcing agents in many polymeric materials. In this study, bifunctional reactive cellulose nanocrystals (RCNCs) with carboxyl and aldehyde functionalities were used as reinforcements to prepare acetal-bonding cross-linked poly(vinyl alcohol) (PVA) films. Two RCNCs were obtained through the mechanical homogenization of partially carboxylated dialdehyde cellulose (DAC) with a residual aldehyde content of 0.

Optimization of dicarboxylic acid cellulose synthesis: reaction stoichiometry and role of hypochlorite scavengers.

The reaction conditions in terms of reaction time, sodium chlorite stoichiometry, and the effect of hypochlorite scavengers on the chlorite oxidation of dialdehyde cellulose (DAC) was studied. The impact of storage on the reactivity of DAC fibers was also investigated. It was found that chlorite oxidation of DAC is a rapid reaction, resulting in oxidation of 71% of the aldehyde after only 8 min when 2.

Strong, self-standing oxygen barrier films from nanocelluloses modified with regioselective oxidative treatments.

In this work, three self-standing nanocellulose films were produced from birch pulp using regioselective oxidation and further derivatization treatments. The modified celluloses were synthesized using periodate oxidation, followed by chlorite oxidation, bisulfite addition, or reductive amination with amino acid taurine, which resulted in dicarboxylic acid cellulose (DCC), α-hydroxy sulfonic acid cellulose (HSAC), and taurine-modified cellulose (TC), respectively. The nanocelluloses were fabricated by mechanical disintegration using high-pressure homogenization.

Amphiphilic cellulose nanocrystals from acid-free oxidative treatment: physicochemical characteristics and use as an oil-water stabilizer.

A chemical pretreatment for producing cellulose nanocrystals (CNCs) with periodate oxidation and reductive amination is reported. This new functionalization of cellulose fibers dispenses an alternative method for fabricating individual CNCs without the widely used acid hydrolysis process. CNCs can be directly modified during the pretreatment step, and no additional post-treatments are required to tune the surface properties.

Porous thin film barrier layers from 2,3-dicarboxylic acid cellulose nanofibrils for membrane structures.

To fabricate a strong hydrophilic barrier layer for ultrafiltration (UF) membranes, 2,3-dicarboxylic acid cellulose nanofibrils with high anionic surface charge density (1.2 mekv/g at pH 7) and a width of 22 ± 4 nm were used. A simple vacuum filtration method combined with a solvent exchange procedure resulted in a porous layer with a thickness of ∼ 0.

Enhancement of the nanofibrillation of wood cellulose through sequential periodate-chlorite oxidation.

Sequential regioselective periodate-chlorite oxidation was employed as a new and efficient pretreatment to enhance the nanofibrillation of hardwood cellulose pulp through homogenization. The oxidized celluloses with carboxyl contents ranging from 0.38 to 1.

Flocculation performance of a cationic biopolymer derived from a cellulosic source in mild aqueous solution.

The flocculation behavior of cationic, quaternary ammonium groups containing cellulosic biopolymers, CDACs, synthesized by cationizing dialdehyde cellulose in mild aqueous solution was studied in a kaolin suspension. In particular, the role of CDAC dosage and solution pH, NaCl concentration, and temperature were clarified. In addition, the initial apparent charge densities (CDs), particle sizes, ζ-potential, and stability of CDs were determined.