Simulation of an Orthodontic System Using the Lingual Technique Based on the Finite Element Method.

The finite element method (FEM) is an advanced numerical technique that can be applied in orthodontics to study tooth movements, stresses, and deformations that occur during orthodontic treatment. It is also useful for simulating and visualizing the biomechanical behavior of teeth, tissues, and orthodontic appliances in various clinical scenarios. The objective of this research was to analyze the mechanical behavior of teeth, tissues, and orthodontic appliances in various clinical scenarios.

Current Endodontic Practices among Romanian Dental Practitioners: A Cross-Sectional Study.

Root canal therapy (RCT) is usually performed in Romania by general dentists (GDPs) because they are more readily available and more reasonably priced than endodontists. Concerns have been raised about the quality of RCTs performed by GDPs, possibly due to insufficient equipment or knowledge; therefore, this study aims to investigate current endodontic practices in Romania. Materials and Methods: A cross-sectional study was conducted via a questionnaire distributed to 400 randomly selected Romanian dentists, with 285 fully validated completed responses (71.

Orthodontic System Modeled and Simulated with the Lingual Technique to Assess Tooth Forces.

CBCT (cone beam computed tomography) is an imaging investigation that provides three-dimensional (3D) images of craniofacial structures. The purpose of this study is to determine the mechanical behavior of an orthodontic system where the lingual treatment technique was used in a 25-year-old female patient from whom a set of CBCT scans was used. CBCT images were processed through software programs such as Invesalius, Geomagic, and Solid Works, to create models containing virtual solids.

A Finite Element Method Study on a Simulation of the Thermal Behaviour of Four Methods for the Restoration of Class II Cavities.

The possibility of dental pulp damage during dental procedures is well known. According to studies, during finishing and polishing without cooling, temperatures of up to 140 °C or more can be generated. There are many studies that have analysed the influence of the finishing and polishing of fillings on the mechanical parameters, but the analysis of thermal parameters has led to uncertain results due to the difficulty of performing this in vivo.

Assessment of the Cyclic Fatigue Performance of the Novel Protaper Ultimate File System Used in Different Kinematics: An In Vitro Study.

This in vitro study aims to assess the cyclic fatigue resistance of the Protaper Ultimate (PTU) files compared to the Protaper Gold (PTG) and the M3 UDG (M3) files using various motion kinematics in simulated canals. As far as the authors are aware, no study has previously compared the three file systems before this current investigation. Therefore, closing this information gap is the goal of the current research.

Metabolic and Other Endocrine Elements with Regard to Lifestyle Choices: Focus on E-Cigarettes.

Our objective was to overview recent data on metabolic/endocrine disorders with respect to e-cigarette (e-cig) use. This is a narrative review; we researched English, full-length, original articles on PubMed (between January 2020 and August 2023) by using different keywords in the area of metabolic/endocrine issues. We only included original clinical studies (n = 22) and excluded case reports and experimental studies.

An In Vitro Study regarding the Wear of Composite Materials Following the Use of Dental Bleaching Protocols.

Composite materials used in dental restorations are considered resistant, long-lasting and aesthetic. As the wear of restorations is an important element in long-term use, the aim of this study was to evaluate the surface condition of nanohybrid and microfilled composite resins, after being subjected to the erosive action of dental bleaching protocols. This paper reflects a comparative study between one nanofilled composite and three microfilled composites used in restorations.

Study on the Restoration of Class II Carious Cavities by Virtual Methods: Simulation of Mechanical Behavior.

The restoration of class II cavities is predominantly carried out with composite materials. Due to the high failure rate in restoring this type of cavity, composite materials with much-improved properties and new application techniques have been promoted. The study aimed to analyze the mechanical behavior of several topical composite materials (nanocomposites, nanohybrids and ormocer) using different application techniques.

Effects of Dental Bleaching Agents on the Surface Roughness of Dental Restoration Materials.

This study aimed to evaluate the surface roughness evolution of several finished and polished composites when bleaching materials are applied. The research was conducted on four microhybrid or nanofilled composites that are used in dental restorations. For each composite type, 5 samples were selected for control, 5 samples were subjected to the bleaching protocol "office bleach" with 40% hydrogen peroxide, and 5 other samples were subjected to the "home bleach" protocol with 16% carbamide peroxide, resulting in a total number of 60 samples.

Importance of radiological examination in the evaluation of canal fillings performed with bioceramic sealers.

Bioceramic-based fillers have been evaluated in several studies but studies are still limited. The present study examined 36 postoperative radiographic analyses that were divided into four groups, of which three used bioceramic-based fillers, namely Total Fill, BioRoot RCS and Biodentine, while the fourth group was used as control and implemented the resin-based AH Plus Jet sealer. The present results did not indicate significant differences in radiopacity between sealers at a certain level of obturation.

Analysis of Temperatures Generated during Conventional Laser Irradiation of Root Canals-A Finite Element Study.

The success of endodontic treatment is dependent on the removal of bacteria. A modern strategy to reduce bacterial load is laser irradiation. During this procedure, there is a local increase in temperature with possible side effects.

Using the Finite Element Method to Determine the Odonto-Periodontal Stress for a Patient with Angle Class II Division 1 Malocclusion.

The finite element method (FEM) is a computational method that can solve all biomechanical problems, including the field of orthodontics. The purpose of this virtual experimental study is to determine the behavior of a real orthodontic system subjected to different systems of loads. To analyze the real orthodontic system, we studied the case of a 21-year-old female patient.

Clinical, histopathological and immunohistochemical changes of the superficial marginal periodontium caused by orthodontic treatment with fixed metallic orthodontic appliances.

Malocclusions negatively influence dental function, physical well-being, and quality of life. According to data provided by the World Health Organization (WHO), malocclusions represent the third most widespread oral health problem, after dental caries and periodontal diseases. In recent years, more and more people call for orthodontic treatment with fixed braces that aim at establishing a dental, aesthetic, and functional balance, compatible with a normal life.

Approach of Acromegaly during Pregnancy.

Acromegaly-related sub/infertility, tidily related to suboptimal disease control (1/2 of cases), correlates with hyperprolactinemia (1/3 of patients), hypogonadotropic hypogonadism—mostly affecting the pituitary axis in hypopituitarism (10−80%), and negative effects of glucose profile (GP) anomalies (10−70%); thus, pregnancy is an exceptional event. Placental GH (Growth Hormone) increases from weeks 5−15 with a peak at week 37, stimulating liver IGF1 and inhibiting pituitary GH secreted by normal hypophysis, not by somatotropinoma. However, estrogens induce a GH resistance status, protecting the fetus form GH excess; thus a full-term, healthy pregnancy may be possible.

Approach of Heterogeneous Spectrum Involving 3beta-Hydroxysteroid Dehydrogenase 2 Deficiency.

We aim to review data on 3beta-hydroxysteroid dehydrogenase type II (3βHSD2) deficiency. We identified 30 studies within the last decade on PubMed: 1 longitudinal study (N = 14), 2 cross-sectional studies, 1 retrospective study (N = 16), and 26 case reports (total: 98 individuals). Regarding geographic area: Algeria (N = 14), Turkey (N = 31), China (2 case reports), Morocco (2 sisters), Anatolia (6 cases), and Italy (N = 1).

New Approach to Addison Disease: Oral Manifestations Due to Endocrine Dysfunction and Comorbidity Burden.

This review highlights oral anomalies with major clinical impact in Addison disease (AD), including dental health and dermatologic features, through a dual perspective: pigmentation issues and AD comorbidities with oral manifestations. Affecting 92% of AD patients, cutaneomucosal hyperpigmentation is synchronous with or precedes general manifestations by up to a decade, underlying melanocytic infiltration of the basal epidermal layer; melanophages in the superficial dermis; and, rarely, acanthosis, perivascular lymphocytic infiltrate, and hyperkeratosis. Intraoral pigmentation might be the only sign of AD; thus, early recognition is mandatory, and biopsy is helpful in selected cases.

Post Placement and Restoration of Endodontically Treated Canines: A Finite Element Analysis Study.

The purpose of this study was to show the improved outcomes of restoring endodontically treated teeth with fiberglass posts compared to restorations using metal posts. In our study, we used the Finite Element Method (FEM), which is based on the principle that a physical model that supports a given load distributes the stress throughout its volume. We sought to assess what stress results in a tooth when it is restored using a fiberglass post compared to restoration using a metal post.

Modeling and Simulating an Orthodontic System Using Virtual Methods.

Cone beam computed tomography (CBCT) is a modern imaging technique that uses X-rays to investigate the structures of the dento-maxillary apparatus and obtain detailed images of those structures. The aim of this study was to determine a functional mathematical model able to evaluate the elastic force intensity on each bracket and tube type element and the ways in which those components act on the orthodontic system being used. To analyze a real orthodontic system, we studied the case of a 13-year-old female patient.

Diabetes mellitus: Plasticizers and nanomaterials acting as endocrine-disrupting chemicals (Review).

Various plasticizers and nanomaterials have been linked to endocrine disruptors or endocrine-disrupting chemicals (EDCs) which represent a large, heterogeneous, yet incompletely understood group of structures acting on normal and pathological body pathways such as hormonal production, secretion, transport and receptor binding. By contrast, various applications of nanoparticles are currently under investigation since the delivery of useful drugs, particularly insulin in diabetes mellitus, is essential in case of insulin deficiency. The aim of the present review was to introduce and examine different plasticizers and nanomaterials with potential applications for diabetic patients (such as selenium or gold-based nanoparticles that help the oral delivery of insulin) or plasticizers/nanomaterials acting similarly to EDCs in relation to the human and animal body, particularly glucose metabolism impairment such as diabetes mellitus (DM).

Correlations between periodontal indices and osteoporosis.

In the pathogenesis of chronic periodontitis, there are general systemic factors which play a major role, such as osteoporosis, with menopause as the most common etiological factor, and other pathological determining conditions for osteoporosis as well (ovary, thyroid and malignant tumors). The aim of the present study was to assess the correlations between periodontal indices and osteoporosis. The study was performed on 35 patients with periodontal disease aged between 45 and 79 years.

Diagnosis and evolution of the benign tumor osteochondroma.

Osteochondroma represents a bone outgrowth covered by cartilaginous tissue and localized on the external surface of the bone. The incidence of osteochondroma is 20-35% of all pediatric benign tumors. Osteochondromas can be present in solitary or multiple forms and usually occur in the metaphysis of long bones in immature skeletons.

Histopathological and immunohistochemical changes of the marginal periodontium in patients with Turner syndrome.

Turner syndrome (TS) is characterized by partial or complete loss of a sexual chromosome, resulting in an incomplete development of the body, gonadic failure, cardiac and renal abnormalities, oro-dental changes, etc. In our study, we proposed to perform a histological and immunohistochemical (IHC) study of the periodontium changes in patients with TS. The biological material under study was represented by fragments of gingival mucosa harvested from 18 patients with TS who presented advanced periodontal lesions and required dental extractions.

Periodontal clinico-morphological changes in patients wearing old nickel-chromium and copper alloys bridges.

Elderly population frequently presents more than one prosthetic restoration realized from different types of dental alloys which, in time, suffer various alterations in the oral environment. Metallic ions are released in saliva due to its electrolytic qualities, interacting with the contact tissues. Studies regarding cytotoxicity of dental alloys are providing contradictory results.