Dispersoids in Al-Mg-Si Alloy AA 6086 Modified by Sc and Y.

The aluminium alloy AA 6086 attains the highest room temperature strength among Al-Mg-Si alloys. This work studies the effect of Sc and Y on the formation of dispersoids in this alloy, especially L1-type ones, which can increase its high-temperature strength. A comprehensive investigation was carried out using light microscopy (LM), scanning (SEM), and transmission (TEM) electron microscopy, energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and dilatometry to obtain the information regarding the mechanisms and kinetics of dispersoid formation, particularly during isothermal treatments.

Effect of Heat Treatment on Osteoblast Performance and Bactericidal Behavior of Ti6Al4V(ELI)-3at.%Cu Fabricated by Laser Powder Bed Fusion.

Cu addition to alloys for biomedical applications has been of great interest to reduce bacterial growth. In situ-alloyed Ti6Al4V(ELI)-3at.%Cu was successfully manufactured by laser powder bed fusion (L-PBF).

Thermoacidophilic Bioleaching of Industrial Metallic Steel Waste Product.

The continuous deposition of hazardous metalliferous wastes derived from industrial steelmaking processes will lead to space shortages while valuable raw metals are being depleted. Currently, these landfilled waste products pose a rich resource for microbial thermoacidophilic bioleaching processes. Six thermoacidophilic archaea (, and ) were cultivated on metal waste product derived from a steelmaking process to assess microbial proliferation and bioleaching potential.

Study of Nanoporosity Evolution during Dealloying AgAu and CoPd by Grazing-Incidence Small-Angle X-ray Scattering.

Electrochemical dealloying has become a standard technique to produce nanoporous network structures of various noble metals, exploiting the selective dissolution of one component from an alloy. While achieving nanoporosity during dealloying has been intensively studied for the prime example of nanoporous Au from a AgAu alloy, dealloying from other noble-metal alloys has been rarely investigated in the scientific literature. Here, we study the evolution of nanoporosity in the electrochemical dealloying process for both CoPd and AgAu alloys using a combination of grazing-incidence small-angle X-ray scattering (GISAXS), kinetic Monte Carlo (KMC) simulations, and scanning transmission electron microscopy (STEM).

High-Resolution Microstructure Characterization of Additively Manufactured X5CrNiCuNb17-4 Maraging Steel during Ex and In Situ Thermal Treatment.

Powder and selective laser melting (SLM) additively manufactured parts of X5CrNiCuNb17-4 maraging steel were systematically investigated by electron microscopy to understand the relationship between the properties of the powder grains and the microstructure of the printed parts. We prove that satellites, irregularities and superficial oxidation of powder particles can be transformed into an advantage through the formation of nanoscale (AlMnSiTiCr) oxides in the matrix during the printing process. The nano-oxides showed extensive stability in terms of size, spherical morphology, chemical composition and crystallographic disorder upon in situ heating in the scanning transmission electron microscope up to 950 °C.

An In Situ Synchrotron Dilatometry and Atomistic Study of Martensite and Carbide Formation during Partitioning and Tempering.

Precipitation hardened and tempered martensitic-ferritic steels (TMFSs) are used in many areas of our daily lives as tools, components in power generation industries, or in the oil and gas (O&G) industry for creep and corrosion resistance. In addition to the metallurgical and forging processes, the unique properties of the materials in service are determined by the quality heat treatment (HT). By performing a quenching and partitioning HT during an in situ high energy synchrotron radiation experiment in a dilatometer, the evolution of retained austenite, martensite laths, dislocations, and carbides was characterized in detail.

Exploring the microbial biotransformation of extraterrestrial material on nanometer scale.

Exploration of microbial-meteorite redox interactions highlights the possibility of bioprocessing of extraterrestrial metal resources and reveals specific microbial fingerprints left on extraterrestrial material. In the present study, we provide our observations on a microbial-meteorite nanoscale interface of the metal respiring thermoacidophile Metallosphaera sedula. M.

Magneto-Ionic Switching of Superparamagnetism.

Electrochemical reactions represent a promising approach to control magnetization via electric fields. Favorable reaction kinetics have made nanoporous materials particularly interesting for magnetic tuning experiments. A fully reversible ON and OFF switching of magnetism in nanoporous Pd(Co) at room temperature is demonstrated, triggered by electrochemical hydrogen sorption.

Biotransformation of Scheelite CaWO by the Extreme Thermoacidophile : Tungsten-Microbial Interface.

The tungsten-microbial interactions and microbial bioprocessing of tungsten ores, which are still underexplored, are the focus of the current study. Here we show that the biotransformation of tungsten mineral scheelite performed by the extreme thermoacidophile leads to the breakage of scheelite structure and subsequent tungsten solubilization. Total soluble tungsten is significantly higher in cultures containing grown on scheelite than the abiotic control, indicating active bioleaching.

Nanoscale Tungsten-Microbial Interface of the Metal Immobilizing Thermoacidophilic Archaeon Cultivated With Tungsten Polyoxometalate.

Inorganic systems based upon polyoxometalate (POM) clusters provide an experimental approach to develop artificial life. These artificial symmetric anionic macromolecules with oxidometalate polyhedra as building blocks were shown to be well suited as inorganic frameworks for complex self-assembling and organizing systems with emergent properties. Analogously to mineral cells based on iron sulfides, POMs are considered as inorganic cells in facilitating prelife chemical processes and displaying "life-like" characteristics.

Organic coating on biochar explains its nutrient retention and stimulation of soil fertility.

Amending soil with biochar (pyrolized biomass) is suggested as a globally applicable approach to address climate change and soil degradation by carbon sequestration, reducing soil-borne greenhouse-gas emissions and increasing soil nutrient retention. Biochar was shown to promote plant growth, especially when combined with nutrient-rich organic matter, e.g.

Electrochemically Tunable Resistance of Nanoporous Platinum Produced by Dealloying.

The extremely high surface-to-volume ratio of nanoporous platinum (np-Pt) produced by dealloying was applied for tuning electrical resistance by surface charging. In the as-dealloyed state, a characteristic sign-inversion of the charging-induced resistance variation occurs, which can be associated with the electronic structure of PtO. After electrochemical reduction, the relative resistance variations of np-Pt of up to 58% could be generated by electrochemically induced adsorption and desorption, which was 1 order of magnitude larger compared with that of cluster-assembled nanocrystalline Pt.

Nanoscale voxel spectroscopy by simultaneous EELS and EDS tomography.

Extending the capabilities of electron tomography with advanced imaging techniques and novel data processing methods, can augment the information content in three-dimensional (3D) reconstructions from projections taken in the transmission electron microscope (TEM). In this work we present the application of simultaneous electron energy-loss spectroscopy (EELS) and energy-dispersive X-ray spectroscopy (EDS) to scanning TEM tomography. Various tools, including refined tilt alignment procedures, multivariate statistical analysis and total-variation minimization enable the 3D reconstruction of analytical tomograms, providing 3D analytical metrics of materials science samples at the nanometer scale.

An analytical technique to extract surface information of negatively stained or heavy-metal shadowed organic materials within the TEM.

Using a series of uranyl acetate stained or platinum-palladium shadowed organic samples, an empirical analytical method to extract surface information from energy-filtered transmission electron microscopy (EFTEM) images is described. The distribution of uranium or platinum-palladium atoms, which replicate the sample surface topography, have been mathematically extracted by dividing the image acquired in the valence bulk plasmon energy region (between 20 and 30 eV) by the image acquired at the carbon K ionization edge (between 284 and 300 eV). The resulting plasmon-to-carbon ratio (PCR) image may be interpreted as a precise metal replica of the sample surface.

Atmospheric chemistry of acetylacetone.

A kinetic study on the reactions of the OH radical and ozone with acetylacetone (AcAc) has been performed in a 1080 L quartz glass reaction chamber using in situ FTIR spectroscopy analysis. Temperature dependent rate coefficients for the reaction of AcAc with the OH radical were determined over the temperature range 285-310 K using the relative kinetic method. The following Arrhenius expression was derived: k = 3.

Product study of the OH, NO3, and O3 initiated atmospheric photooxidation of propyl vinyl ether.

A product study is reported on the gas-phase reactions of OH and NO3 radicals and ozone with propyl vinyl ether (PVE). The experiments were performed in a 405 L borosilicate glass chamber in synthetic air at 298 +/- 3 K using long path in situ FTIR spectroscopy for the analysis of the reactants and products. In the presence of NO(x) (NO + NO2) the main products for the OH-radical initiated oxidation of PVE were propylformate and formaldehyde with molar formation yields of 78.

Rate coefficients for the gas-phase reaction of OH radicals with dimethyl sulfide: temperature and O2 partial pressure dependence.

Rate coefficients for the gas-phase reaction of hydroxyl (OH) radicals with dimethyl sulfide (CH(3)SCH(3), DMS) have been determined using a relative rate technique. The experiments were performed under different conditions of temperature (250-299 K) and O(2) partial pressure (approximately 0 Torr O(2)-380 Torr O(2)), at a total pressure of 760 Torr bath gas (N(2) + O(2)), in a 336 l reaction chamber, using long path in situ Fourier transform (FTIR) absorption spectroscopy to monitor the disappearance rates of DMS and the reference compounds (ethene, propene and 2-methylpropene). OH was produced by the photolysis of H(2)O(2).