Monte Carlo Simulation Modeling of Nanoparticle-Polymer Cosuspensions.

Creation of high-quality and novel polymer-particle nanocomposites to a large extent depends on understanding the behaviors of individual polymer chains and particles, especially at the mixing state in a liquid solvent. Simulations can help identify critical parameters and equations that govern the suspension behaviors. This study is the first attempt to understand the agglomeration processes of ZnO nanoparticle and poly(methyl methacrylate) polymer cosuspensions through a constant number Monte Carlo simulation.

Suspension-based imprint lithography of ZnO-PMMA hybrids.

Imprint lithography has been explored as a method to transfer arrays of patterned features onto pure polymers and polymer/metallic nanoparticle composites. Despite the success of this method for those materials, it has never been achieved on the sub-micron scale with polymer-oxide particle hybrids. This study patterns ZnO-PMMA (poly(methyl methacrylate)) hybrids via imprint lithography from co-suspensions of PMMA and ZnO nanoparticles in anisole from 1 vol% to 20 vol% ZnO solids loading.

Experimental and Modeling Study of Solvent Diffusion in PDMS for Nanoparticle-Polymer Cosuspension Imprint Lithography.

This study is the first that focuses on solvent migration in a polydimethylsiloxane (PDMS) stamp during the imprint lithography of ZnO-poly(methyl methacrylate) (PMMA) hybrid suspensions. Using suspensions with varying solids loading levels and ZnO/PMMA ratios, the uptake of the anisole solvent in the stamp is evaluated as a function of time. Laser confocal microscopy is employed as a unique technique to measure the penetration depth of the solvent into the stamp.

One-pot, bioinspired coatings to reduce the flammability of flexible polyurethane foams.

In this manuscript, natural materials were combined into a single "pot" to produce flexible, highly fire resistant, and bioinspired coatings on flexible polyurethane foam (PUF). In one step, PUF was coated with a fire protective layer constructed of a polysaccharide binder (starch or agar), a boron fire retardant (boric acid or derivative), and a dirt char former (montmorillonite clay). Nearly all coatings produced a 63% reduction in a critical flammability value, the peak heat release rate (PHRR).