Synergistic functional activity of a landfill microbial consortium in a microplastic-enriched environment.

Plastic pollution of the soil is a global issue of increasing concern, with far-reaching impact on the environment and human health. To fully understand the medium- and long-term impact of plastic dispersal in the environment, it is necessary to define its interaction with the residing microbial communities and the biochemical routes of its degradation and metabolization. However, despite recent attention on this problem, research has largely focussed on microbial functional potential, failing to clearly identify collective adaptation strategies of these communities.

Enzymatic hydrolysis of single-use bioplastic items by improved recombinant yeast strains.

Single-use bioplastic items pose new challenges for a circular plastics economy as they require different processing than petroleum-based plastics items. Microbial and enzymatic recycling approaches could address some of the pitfalls created by the influx of bioplastic waste. In this study, the recombinant expression of a cutinase-like-enzyme (CLE1) was improved in the yeast Saccharomyces cerevisiae to efficiently hydrolyse several commercial single-use bioplastic items constituting blends of poly(lactic acid), poly(1,4-butylene adipate-co-terephthalate), poly(butylene succinate) and mineral fillers.

Deamination of Polyols from the Glycolysis of Polyurethane.

Methylenedianiline (MDA) is a secondary, undesired, product of the glycolysis process of polyurethane (PU) scraps due to hydrolysis and pyrolysis side reactions. As an aromatic and carcinogen amine, MDA poses different problems in handling, transporting, and labelling recycled polyols derived from glycolysis, hindering the closure of PU recycling loop. Aiming to provide a solution to this issue, in this work different deaminating agents (DAs) were investigated with the purpose of analyzing their reactivity with MDA.

Oxygen limitation in aerobic polyhydroxyalkanoates production from sewage sludge anaerobic fermentation liquids under low and medium organic loading rate.

The present study describes the microbial production of polyhydroxyalkanoates (PHA) from thermally pre-treated sewage sludge at pilot scale level, investigating for the first time the effect of the organic loading rate (OLR) under oxygen limitation on biomass storage properties and kinetics. Polymer characteristics have been also evaluated. The selection/enrichment of PHA-storing biomass was successfully achieved in a Sequencing Batch Reactor (SBR) under short hydraulic retention time (HRT; 2 days).

Chemical Recycling of Polyurethane Waste via a Microwave-Assisted Glycolysis Process.

In this work, we explored a microwave-assisted glycolysis process to chemically recycle rigid polyurethane (PU) foam waste to obtain a single-phase product with suitable physio-chemical properties as a secondary raw material for the preparation of new rigid PU products. Such an approach was compared to a conventionally heated (ConvH) process, analyzing the performances of different catalysts. The use of microwaves allowed a 94% decrease in the reaction time scale of rigid PU depolymerization, with a concurrent 45% reduction in energy expense.

Ultrasound-Promoted Abatement of Formaldehyde in Liquid Phase with Electrospun Nanostructured Membranes: The Synergy of Combined AOPs.

The present work investigates the effect of ultrasounds in the performance of combined advanced oxidation processes (AOPs) on the degradation of formaldehyde (HCHO)-polluted aqueous solutions for potential application in wastewater treatment. Different heterogeneous nanostructured catalysts based on TiO and FeSO for photocatalysis and the Fenton process were employed after electrospray deposition on electrospun nanofibrous membranes. Such systems were tested, without the use of any added hydrogen peroxide, by varying the combinations among the selected AOPs in a batch reactor configuration.

Treatment of food waste contaminated by bioplastics using BSF larvae: Impact and fate of starch-based bioplastic films.

The use of Black Soldier Fly (BSF) larvae in the treatment of biowaste, including food waste, represents a promising new (waste) treatment option. In line with an increasing use of starch-based bioplastics in food packaging, (e.g.

Small intestinal submucosa-derived extracellular matrix as a heterotopic scaffold for cardiovascular applications.

Structural cardiac lesions are often surgically repaired using prosthetic patches, which can be biological or synthetic. In the current clinical scenario, biological patches derived from the decellularization of a xenogeneic scaffold are gaining more interest as they maintain the natural architecture of the extracellular matrix (ECM) after the removal of the native cells and remnants. Once implanted in the host, these patches can induce tissue regeneration and repair, encouraging angiogenesis, migration, proliferation, and host cell differentiation.

Investigation and Optimization of Vacuum Plasma Treatment of PA66 Fabric for Reduced Fire Retardant Consumption.

Flame retardant (FR) textiles were obtained by surface treatments of polyamide 66 fabrics with microwave (MW) plasma technology in order to reduce the amount of FR involved in the fabric finishing process. More specifically, MW vacuum plasma was employed for polymer surface activation by using a helium/oxygen (He/O) gas mixture, evaluating the effect of different treatment parameters on the affinity toward thiourea impregnation. Surface fabric modification was investigated both in terms of uniformity and increased thiourea absorption by infrared spectroscopy, wicking properties, and gravimetric characterization to define an operative window for plasma treatment conditions.

Effects of Solvent and Electrospinning Parameters on the Morphology and Piezoelectric Properties of PVDF Nanofibrous Membrane.

PVDF electrospun membranes were prepared by employing different mixtures of solvents and diverse electrospinning parameters. A comprehensive investigation was carried out, including morphology, nanofiber diameter, crystallinity, β-phase fraction, and piezoelectric response under external mechanical strain. It was demonstrated that by using low-toxicity DMSO as the solvent, PVDF membranes with good morphology (bead-free, smooth surface, and uniform nanofiber) can be obtained.

Electrospun Chitosan Functionalized with C12, C14 or C16 Tails for Blood-Contacting Medical Devices.

Medical applications stimulate the need for materials with broad potential. Chitosan, the partially deacetylated derivative of chitin, offers many interesting characteristics, such as biocompatibility and chemical derivatization possibility. In the present study, porous scaffolds composed of electrospun interwoven nanometric fibers are produced using chitosan or chitosan functionalized with aliphatic chains of twelve, fourteen or sixteen methylene groups.

Life Cycle Assessment of Polyurethane Foams from Polyols Obtained through Chemical Recycling.

In this research, the results of the life cycle assessment of polyurethane (PUR) foams with different recycled polyol contents are presented. A methodological framework implementing laboratory activities directly into the life cycle assessment has been developed. Laboratory activities made the primary data related to the recycled polyol production available through the glycolysis of polyurethane scraps and the subsequent production and characterization of the foams.

Combined AOPs for Formaldehyde Degradation Using Heterogeneous Nanostructured Catalysts.

In this paper we studied the combination of advanced oxidation processes (AOPs), i.e., TiO-based photocatalysis and photo-Fenton process, on the degradation of aqueous solutions containing a low (90 ppm) concentration of formaldehyde.

Investigation of Plasma-Assisted Functionalization of Graphitic Materials for Epoxy Composites.

In this study we evaluated the effect of microwave vacuum plasma for the surface functionalization of graphitic fillers (graphite and graphene); we also showed the effect of the functionalization on the mechanical and electrical properties of epoxy composites. Optimized conditions of plasma treatment were defined to obtain high plasma density and increased surface hydrophilicity of the fillers, with high stability of functionalization over time and temperature. However, the extent of such treatments proved to be limited by the high temperatures involved in the curing process of the resin.

Influence of Different Carbon-Based Fillers on Electrical and Mechanical Properties of a PC/ABS Blend.

The present work examines the influence of different carbon-based fillers on the performance of electrically conductive polymer blend composites. More specifically, we examined and compared the effects of graphene (GR), carbon nanotubes (CNTs) and carbon black (CB) on a PC/ABS matrix by morphological investigation, electrical and physic-mechanical characterization. Electrical analyses showed volume resistivity decreased when the CNTs and CB content were increased, although the use of melt-mixed GR did not really influence this property.

Life Cycle Assessment Framework To Support the Design of Biobased Rigid Polyurethane Foams.

A methodological framework implementing laboratory activities and life cycle assessment is presented and applied to determine which parameters should be considered to develop biobased rigid polyurethane foams for thermal insulation with improved environmental performances when compared to their fossil counterparts. The framework was applied to six partially biobased (produced from bio-based polyols obtained from azelaic acid and/or lignin) and one fossil-based formulations. A comprehensive set of impact assessment categories was investigated including uncertainty and sensitivity analysis.

The Effect of Different Compatibilizers on the Properties of a Post-Industrial PC/PET Blend.

The substitution of virgin resins by recycled ones is a worldwide tendency that is supported by the fluctuation of oil prices and the transition to a circular economy. Polymeric blends have been intensively studied because of their ability to provide tailored properties for particular applications. However, in their design phases, the issue of end-life re-use had not been well addressed, and now difficulties in their recycling are arising.

Microwave-assisted synthesis of isosorbide-derived diols for the preparation of thermally stable thermoplastic polyurethane.

In order to prepare thermally stable isosorbide-derived thermoplastic polyurethane, the synthesis of two new chiral exo-exo configured diols, prepared from isosorbide, and two types of diphenols (bisphenol A and thiodiphenol) was described. The synthesis conditions were optimized under conventional heating and microwave irradiations. To prove their suitability in polymerization, these monomers were successfully polymerized using 4,4'-diphenylmethane diisocyanate (MDI) and hexamethylene diisocyanate (HDI).

Smart and Covalently Cross-Linked: Hybrid Shape Memory Materials Reinforced through Covalent Bonds by Zirconium Oxoclusters.

The first examples of organic-inorganic hybrid materials reinforced by transition-metal oxoclusters that exhibit shape memory properties, based on the covalent incorporation of zirconium-based inorganic building blocks, are reported. Methacrylate-functionalized zirconium oxoclusters Zr O (OMc) and [Zr O (OH) (OOCCH CH ) {OOCC(CH )=CH } ] , with the covalent incorporation in a butyl acrylate (BA)/polycaprolactone dimethacrylate (PCLDMA) copolymer and the noncovalent incorporation of [Zr O (OH) (OOCCH CH ) ] are focused upon herein. Shape recovery and fixity rates are studied to observe if the shape memory properties are preserved upon going from a simple copolymer to noncovalent or covalent-based hybrids.

Electrospun Scaffolds for Osteoblast Cells: Peptide-Induced Concentration-Dependent Improvements of Polycaprolactone.

The design of hybrid poly-ε-caprolactone (PCL)-self-assembling peptides (SAPs) matrices represents a simple method for the surface functionalization of synthetic scaffolds, which is essential for cell compatibility. This study investigates the influence of increasing concentrations (2.5%, 5%, 10% and 15% w/w SAP compared to PCL) of three different SAPs on the physico-chemical/mechanical and biological properties of PCL fibers.

Facile and selective covalent grafting of an RGD-peptide to electrospun scaffolds improves HUVEC adhesion.

The development of a biomimetic surface able to promote endothelialization is fundamental in the search for blood vessel substitutes that prevent the formation of thrombi or hyperplasia. This study aims at investigating the effect of functionalization of poly-ε-caprolactone or poly(L-lactic acid-co-ɛ-caprolactone) electrospun scaffolds with a photoreactive adhesive peptide. The designed peptide sequence contains four Gly-Arg-Gly-Asp-Ser-Pro motifs per chain and a p-azido-Phe residue at each terminus.

Synthesis and Process Optimization of Electrospun PEEK-Sulfonated Nanofibers by Response Surface Methodology.

In this study electrospun nanofibers of partially sulfonated polyether ether ketone have been produced as a preliminary step for a possible development of composite proton exchange membranes for fuel cells. Response surface methodology has been employed for the modelling and optimization of the electrospinning process, using a Box-Behnken design. The investigation, based on a second order polynomial model, has been focused on the analysis of the effect of both process (voltage, tip-to-collector distance, flow rate) and material (sulfonation degree) variables on the mean fiber diameter.

Structural and Mechanical Characterization of Sustainable Composites Based on Recycled and Stabilized Fly Ash.

This paper reports the results on the use of an innovative inert, based on stabilized fly ash from municipal solid waste incineration as a filler for polypropylene. The starting material, which contains large quantities of leachable Pb and Zn, was stabilized by means of an innovative process using rice husk ash as a waste silica source, together with other fly ashes, such as coal fly ash and flue gas desulfurization residues. The use of all waste materials to obtain a new filler makes the proposed technology extremely sustainable and competitive.

Self-assembling peptide-enriched electrospun polycaprolactone scaffolds promote the h-osteoblast adhesion and modulate differentiation-associated gene expression.

Electrospun polycaprolactone (PCL) is able to support the adhesion and growth of h-osteoblasts and to delay their degradation rate to a greater extent with respect to other polyesters. The drawbacks linked to its employment in regenerative medicine arise from its hydrophobic nature and the lack of biochemical signals linked to it. This work reports on the attempt to add five different self-assembling (SA) peptides to PCL solutions before electrospinning.