Oil Displacement in Calcite-Coated Microfluidic Chips via Waterflooding at Elevated Temperatures and Long Times.

In microfluidic studies of improved oil recovery, mostly pore networks with uniform depth and surface chemistry are used. To better mimic the multiple porosity length scales and surface heterogeneity of carbonate reservoirs, we coated a 2.5D glass microchannel with calcite particles.

Tuning Interfacial Properties and Processes by Controlling the Rheology and Structure of Poly( N-isopropylacrylamide) Particles at Air/Water Interfaces.

By combining controlled experiments on single interfaces with measurements on solitary bubbles and liquid foams, we show that poly( N-isopropylacrylamide) (PNIPAM) microgels assembled at air/water interfaces exhibit a solid to liquid transition changing the temperature, and that this is associated with the change in the interfacial microstructure of the PNIPAM particles around their volume phase transition temperature. We show that the solid behaves as a soft 2D colloidal glass, and that the existence of this solid/liquid transition offers an ideal platform to tune the permeability of air bubbles covered by PNIPAM and to control macroscopic foam properties such as drainage, stability, and foamability. PNIPAM particles on fluid interfaces allow new tunable materials, for example foam structures with variable mechanical properties upon small temperature changes.

Design of a hybrid advective-diffusive microfluidic system with ellipsometric detection for studying adsorption.

Establishing and maintaining concentration gradients that are stable in space and time is critical for applications that require screening the adsorption behavior of organic or inorganic species onto solid surfaces for wide ranges of fluid compositions. In this work, we present a design of a simple and compact microfluidic device based on steady-state diffusion of the analyte, between two control channels where liquid is pumped through. The device generates a near-linear distribution of concentrations.

High-throughput sorting of drops in microfluidic chips using electric capacitance.

We analyze a recently introduced approach for the sorting of aqueous drops with biological content immersed in oil, using a microfluidic chip that combines the functionality of electrowetting with the high throughput of two-phase flow microfluidics. In this electrostatic sorter, three co-planar electrodes covered by a thin dielectric layer are placed directly below the fluidic channel. Switching the potential of the central electrode creates an electrical guide that leads the drop to the desired outlet.

Stability Limits of Capillary Bridges: How Contact Angle Hysteresis Affects Morphology Transitions of Liquid Microstructures.

The equilibrium shape of a drop in contact with solid surfaces can undergo continuous or discontinuous transitions upon changes in either drop volume or surface energies. In many instances, such transitions involve the motion of the three-phase contact line and are thus sensitive to contact angle hysteresis. Using a combination of electrowetting-based experiments and numerical calculations, we demonstrate for a generic sphere-plate confinement geometry how contact angle hysteresis affects the mechanical stability of competing axisymmetric and nonaxisymmetric drop conformations and qualitatively changes the character of transitions between them.

Hard and soft colloids at fluid interfaces: Adsorption, interactions, assembly & rheology.

Soft microgel particles inherently possess qualities of both polymers as well as particles. We review the similarities and differences between soft microgel particles and stiff colloids at fluid-fluid interfaces. We compare two fundamental aspects of particle-laden interfaces namely the adsorption kinetics and the interactions between adsorbed particles.

Equation of state and adsorption dynamics of soft microgel particles at an air-water interface.

Understanding the adsorption dynamics of soft microgel particles is a key step in designing such particles for potential applications as stimuli-responsive Pickering stabilizers for foams or emulsions. In this study we experimentally determine an equation of state (EOS) for poly (N-isopropylacrylamide) (PNIPAM) microgel particles adsorbed onto an air-water interface using a Langmuir film balance. We detect a finite surface pressure at very low surface concentration of particles, for which standard theories based on hard disk models predict negligible pressures, implying that the particles must deform strongly upon adsorption to the interface.

Electrostatic potential wells for on-demand drop manipulation in microchannels.

Precise control and manipulation of individual drops are crucial in many lab-on-a-chip applications. We present a novel hybrid concept for channel-based discrete microfluidics with integrated electrowetting functionality by incorporating co-planar electrodes (separated by a narrow gap) in one of the microchannel walls. By combining the high throughput of channel-based microfluidics with the individual drop control achieved using electrical actuation, we acquire the strengths of both worlds.

Electrically tunable wetting defects characterized by a simple capillary force sensor.

We present a concept of a wetting defect of continuously variable strength based on electrowetting, along with a capillary force sensor adapted for the characterization of macroscopically heterogeneous surfaces. Patterned electrodes submerged under an insulating layer are used to generate potential wells for drops of electrically conductive liquids on the solid surface, with a well depth that scales with the diameter of the drop and square of the applied alternating (AC) voltage. We characterize the strength of the electrowetting trap and the hysteretic motion of the drop along the surface, using a simple force sensor based on optical imaging of a thin bendable capillary.

Use of electrowetting to measure dynamic interfacial tensions of a microdrop.

The adsorption of surface active species to liquid-liquid and to solid-liquid interfaces can have dramatic effects in microfluidics. In this paper we show how electrowetting on dielectric can be used to monitor a dynamic liquid-liquid interfacial tension (IFT) with a time resolution of O(1 s) using amplitude modulation of the AC voltage. This straightforward method, which requires less than a microlitre of sample, is demonstrated for aqueous drops containing Triton X-100 surfactant on a Teflon AF-coated substrate and with heptane as the immiscible oil ambient.

Droplets formation and merging in two-phase flow microfluidics.

Two-phase flow microfluidics is emerging as a popular technology for a wide range of applications involving high throughput such as encapsulation, chemical synthesis and biochemical assays. Within this platform, the formation and merging of droplets inside an immiscible carrier fluid are two key procedures: (i) the emulsification step should lead to a very well controlled drop size (distribution); and (ii) the use of droplet as micro-reactors requires a reliable merging. A novel trend within this field is the use of additional active means of control besides the commonly used hydrodynamic manipulation.

Influence of cationic composition and pH on the formation of metal stearates at oil-water interfaces.

We study the formation of layers of metal stearates at the interface between a decane solution of stearic acid and aqueous salt solutions of variable composition and pH by monitoring the evolution of their mechanical, optical, and chemical properties as a function of time after formation of the interface. For values of the pH below the pK(a) of stearic acid hardly any interfacial activity is observed. For pH > pK(a), stearic acid deprotonates at the interface and forms metal stearates, eventually leading to the formation of macroscopic solid layers.

A hybrid microfluidic chip with electrowetting functionality using ultraviolet (UV)-curable polymer.

Electrowetting (EW) is widely used in digital microfluidics for the manipulation of drops sandwiched between two parallel plates. In contrast, demonstrations of closed microfluidic channels enhanced with EW functionality are scarce. Here, we report a simple, low-cost method to construct such microchannels enclosed between two glass plates, each of which comprises electrodes and insulating layers.

Aging in dense suspensions of soft thermosensitive microgel particles studied with particle-tracking microrheology.

Using particle tracking microrheology, we studied the glass transition in dense suspensions of thermosensitive microgel particles. These suspensions can be tuned reversibly between the glass state at low temperature and the liquid state at high temperature. In the glass state, the ensemble averaged mean squared displacements (MSDs) of added fluorescent tracer particles depend on the age of the suspension.

On the origins of the universal dynamics of endogenous granules in mammalian cells.

Endogenous granules (EGs) that consist of lipid droplets and mitochondria have been commonly used to assess intracellular mechanical properties via multiple particle tracking microrheology (MPTM). Despite their widespread use, the nature of interaction of EGs with the cytoskeletal network and the type of forces driving their dynamics--both of which are crucial for the interpretation of the results from MPTM technique--are yet to be resolved. In this report, we study the dynamics of endogenous granules in mammalian cells using particle tracking methods.

Dynamics of ballistically injected latex particles in living human endothelial cells.

We studied the dynamics of ballistically injected latex particles (BIP) inside endothelial cells, using video particle tracking to measure the mean squared displacement (MSD) as a function of lag time. The MSD shows a plateau at short times and a linear behavior at longer times, indicating that the BIP are trapped into a viscoelastic network. To reveal more about the molecular constituents and the dynamics of this actin network, we added a variety of drugs.

Microfluidics as a functional tool for cell mechanics.

Living cells are a fascinating demonstration of nature's most intricate and well-coordinated micromechanical objects. They crawl, spread, contract, and relax-thus performing a multitude of complex mechanical functions. Alternatively, they also respond to physical and chemical cues that lead to remodeling of the cytoskeleton.

Microfluidic valves with integrated structured elastomeric membranes for reversible fluidic entrapment and in situ channel functionalization.

We report the utility of structured elastomeric membranes (SEMs) as a multifunctional microfluidic tool. These structured membranes are part of a two-layer microfluidic device, analogous to membrane valves, with the novelty that they incorporate topographical features on the roof of the fluid channel. We demonstrate that when the topographical features are recessed into the roof of the fluid channel, actuation of the membrane leads to effective confinement of fluids down to femtolitres in preformed microfluidic containers.

Hydrodynamic resistance of single confined moving drops in rectangular microchannels.

We integrate a sensitive microfluidic comparator into a T-junction device and report measurements of the excess pressure drop due to a single moving droplet confined in a rectangular microchannel. We specifically focus on drops that are not coated with surfactants and study the effects of drop size, droplet viscosity and capillary number on their hydrodynamic resistance. In the capillary number range of approximately 10(-3)-10(-2), we find two distinct regimes for hydrodynamic resistance behavior based on drop size.