Utilizing targeted integration CHO pools to potentially accelerate the GMP manufacturing of monoclonal and bispecific antibodies.

Monoclonal antibodies (mAbs) are effective therapeutic agents against many acute infectious diseases including COVID-19, Ebola, RSV, Clostridium difficile, and Anthrax. mAbs can therefore help combat a future pandemic. Unfortunately, mAb development typically takes years, limiting its potential to save lives during a pandemic.

Enzymatic basis of the Fc-selective intra-chain disulfide reduction and free thiol content variability in an antibody produced in Escherichia coli.

Background: Escherichia coli (E. coli) is a promising host for production of recombinant proteins (including antibodies and antibody fragments) that don't require complex post-translational modifications such as glycosylation. During manufacturing-scale production of a one-armed antibody in E.

Bax and Bak knockout apoptosis-resistant Chinese hamster ovary cell lines significantly improve culture viability and titer in intensified fed-batch culture process.

In the field of therapeutic protein production, process intensification strategies entailing higher starting cell seeding densities, can potentially increase culture productivity, lower cost of goods and improve facility utilization. However, increased cell densities often trigger apoptotic cell death at the end of the cell culture process and thus reduce total viable cell count. Apoptosis-resistant Chinese hamster ovary cell lines may offer the possibility to diminish this undesired outcome of the intensified production process.

Development of a targeted integration Chinese hamster ovary host directly targeting either one or two vectors simultaneously to a single locus using the Cre/Lox recombinase-mediated cassette exchange system.

Cell line development (CLD) by random integration (RI) can be labor intensive, inconsistent, and unpredictable due to uncontrolled gene integration after transfection. Unlike RI, targeted integration (TI) based CLD introduces the antibody-expressing cassette to a predetermined site by recombinase-mediated cassette exchange (RMCE). The key to success for the development of a TI host for therapeutic antibody production is to identify a transcriptionally active hotspot that enables highly efficient RMCE and antibody expression with good stability.

Maximizing antibody production in a targeted integration host by optimization of subunit gene dosage and position.

Historically, therapeutic protein production in Chinese hamster ovary (CHO) cells has been accomplished by random integration (RI) of expression plasmids into the host cell genome. More recently, the development of targeted integration (TI) host cells has allowed for recombination of plasmid DNA into a predetermined genomic locus, eliminating one contributor to clone-to-clone variability. In this study, a TI host capable of simultaneously integrating two plasmids at the same genomic site was used to assess the effect of antibody heavy chain and light chain gene dosage on antibody productivity.

Advancing Biologics Development Programs with Legacy Cell Lines: Advantages and Limitations of Genetic Testing for Addressing Clonality Concerns Prior to Availability of Late Stage Process and Product Consistency Data.

The bioprocessing industry uses recombinant mammalian cell lines to generate therapeutic biologic drugs. To ensure consistent product quality of the therapeutic proteins, it is imperative to have a controlled production process. Regulatory agencies and the biotechnology industry consider cell line "clonal origin" an important aspect of maintaining process control.

Pyruvate Kinase Muscle-1 Expression Appears to Drive Lactogenic Behavior in CHO Cell Lines, Triggering Lower Viability and Productivity: A Case Study.

Chinese hamster ovary (CHO) cell lines are used to express a variety of therapeutic proteins. However, lactogenic behavior displayed by some CHO cell lines during manufacturing processes may result in a decline in viability, productivity, and possible alterations in product quality. In cultured cells, lactate is produced during glycolysis through irreversible conversion of phosphoenolpyruvate to pyruvate and then lactate via sequential function of pyruvate kinase and lactate dehydrogenase (LDH) enzymes.

Implementation of Plate Imaging for Demonstration of Monoclonality in Biologics Manufacturing Development.

Monoclonality of mammalian cell lines used for production of biologics is a regulatory expectation and one of the attributes assessed as part of a larger process to ensure consistent quality of the biologic. Historically, monoclonality has been demonstrated through statistics generated from limiting dilution cloning or through verified flow cytometry methods. A variety of new technologies are now on the market with the potential to offer more efficient and robust approaches to generating and documenting a clonal cell line.

Strain engineering to reduce acetate accumulation during microaerobic growth conditions in Escherichia coli.

Microaerobic (oxygen limited) conditions are advantageous for several industrial applications since a majority of the carbon atoms can be directed for synthesis of desired products. Oxygen limited conditions, however, can result in high levels of undesirable by-products such as acetate, which subsequently can have an impact on biomass and product yields. The molecular mechanisms involved in acetate accumulation under oxygen limited conditions are not well understood.

Development and characterization of an automated imaging workflow to generate clonally-derived cell lines for therapeutic proteins.

In the development of biopharmaceutical products, the expectation of regulatory agencies is that the recombinant proteins are produced from a cell line derived from a single progenitor cell. A single limiting dilution step followed by direct imaging, as supplemental information, provides direct evidence that a cell line originated from a single progenitor cell. To obtain this evidence, a high-throughput automated imaging system was developed and characterized to consistently ensure that cell lines used for therapeutic protein production are clonally-derived.

Beating the odds: The poisson distribution of all input cells during limiting dilution grossly underestimates whether a cell line is clonally-derived or not.

Establishing that a cell line was derived from a single cell progenitor and defined as clonally-derived for the production of clinical and commercial therapeutic protein drugs has been the subject of increased emphasis in cell line development (CLD). Several regulatory agencies have expressed that the prospective probability of clonality for CHO cell lines is assumed to follow the Poisson distribution based on the input cell count. The probability of obtaining monoclonal progenitors based on the Poisson distribution of all cells suggests that one round of limiting dilution may not be sufficient to assure the resulting cell lines are clonally-derived.

A strategy to accelerate protein production from a pool of clones in Chinese hamster ovary cells for toxicology studies.

In the biopharmaceutical industry, a clonally derived cell line is typically used to generate material for investigational new drug (IND)-enabling toxicology studies. The same cell line is then used to generate material for clinical studies. If a pool of clones can be used to produce material for IND-enabling toxicology studies (Pool for Tox (PFT) strategy) during the time a lead clone is being selected for clinical material production, the toxicology studies can be accelerated significantly (approximately 4 months at Genentech), leading to a potential acceleration of 4 months for the IND submission.

Evaluation of heavy chain C-terminal deletions on productivity and product quality of monoclonal antibodies in Chinese hamster ovary (CHO) cells.

Monoclonal antibodies (mAbs) have been well established as potent therapeutic agents and are used to treat many different diseases. During cell culture production, antibody charge variants can be generated by cleavage of heavy chain (HC) C-terminal lysine and proline amidation. Differences in levels of charge variants during manufacturing process changes make it challenging to demonstrate process comparability.

Toward an era of utilizing methionine overproducing hosts for recombinant protein production in Escherichia coli.

Amino acid sequence variants, especially variants containing non-canonical amino acids such as norleucine and norvaline, are a concern during therapeutic protein production in microbial systems. Substitution of methionine residues with norleucine in recombinant proteins produced in Escherichia coli is well known. Continuous feeding of amino acids such as methionine is commonly used in E.

Air sparging for prevention of antibody disulfide bond reduction in harvested CHO cell culture fluid.

During the scale-up of several Chinese Hamster Ovary (CHO) cell monoclonal antibody production processes, significant reduction of the antibody interchain disulfide bonds was observed. The reduction was correlated with excessive mechanical cell shear during the harvest operations. These antibody reduction events resulted in failed product specifications and the subsequent loss of the drug substance batches.

Strain engineering to prevent norleucine incorporation during recombinant protein production in Escherichia coli.

Incorporation of norleucine in place of methionine residues during recombinant protein production in Escherichia coli is well known. Continuous feeding of methionine is commonly used in E. coli recombinant protein production processes to prevent norleucine incorporation.

Effect of individual Fc methionine oxidation on FcRn binding: Met252 oxidation impairs FcRn binding more profoundly than Met428 oxidation.

The long serum half-lives of mAbs are conferred by pH-dependent binding of IgG-Fc to the neonatal Fc receptor (FcRn). The Fc region of human IgG1 has three conserved methionine residues, Met252, Met358, and Met428. Recent studies showed oxidation of these Met residues impairs FcRn binding and consequently affects pharmacokinetics of therapeutic antibodies.

Eliminating tyrosine sequence variants in CHO cell lines producing recombinant monoclonal antibodies.

Amino acid sequence variants are defined as unintended amino acid sequence changes that contribute to product variation with potential impact to product safety, immunogenicity, and efficacy. Therefore, it is important to understand the propensity for sequence variant (SV) formation during the production of recombinant proteins for therapeutic use. During the development of clinical therapeutic products, several monoclonal antibodies (mAbs) produced from Chinese Hamster Ovary (CHO) cells exhibited SVs at low levels (≤3%) in multiple locations throughout the mAbs.

Thioredoxin 1 is responsible for antibody disulfide reduction in CHO cell culture.

During large-scale manufacturing of an IgG1 monoclonal antibody in Chinese hamster ovary (CHO) cells, reduction of the antibody's disulfide bonds was observed. We present evidence that mammalian thioredoxin 1 (TXN1) is the terminal enzyme responsible for this reduction event. We demonstrate a marked prevention of IgG1 disulfide bond reduction in a cell-density dependent manner by knocking down expression of TXN1 via lentivirus transduction of short hairpin RNA.

Characterization of a nutrient feed precipitate from an E. coli fermentation process.

Metalloproteins require soluble metal ions such as zinc to properly fold into their native and active state to maintain stability and biological activity. When protein products are produced during microbial fermentations, metals are made available to the metalloproteins via nutrient supplements. During the production at the manufacturing-scale of a recombinant product that required zinc as a cofactor, an insoluble precipitate formed in the preparation tank after steam sterilization of the nutrient feed containing methionine, glycerophosphate, and zinc sulfate (MGZ).

Use of disposable reactors to generate inoculum cultures for E. coli production fermentations.

Disposable technology is being used more each year in the biotechnology industry. Disposable bioreactors allow one to avoid expenses associated with cleaning, assembly and operations, as well as equipment validation. The WAVE bioreactor is well established for Chinese Hamster Ovary (CHO) production, however, it has not yet been thoroughly tested for E.

Mechanism of antibody reduction in cell culture production processes.

We recently observed a significant disulfide reduction problem during the scale-up of a manufacturing process for a therapeutic antibody using a CHO expression system. Under certain conditions, extensive reduction of inter-chain disulfide bonds of an antibody produced by CHO cell culture may occur during the harvest operations and/or the protein A chromatography step, resulting in the observation of antibody fragments (light chain, heavy chain, and various combination of both) in the protein A pools. Although all conditions leading to disulfide reduction have not been completely identified, an excessive amount of mechanical cell lysis generated at the harvest step appears to be an important requirement for antibody reduction (Trexler-Schmidt et al.

Mechanisms of unintended amino acid sequence changes in recombinant monoclonal antibodies expressed in Chinese Hamster Ovary (CHO) cells.

An amino acid sequence variant is defined as an unintended amino acid sequence change and contributes to product heterogeneity. Recombinant monoclonal antibodies (MAbs) are primarily expressed from Chinese Hamster Ovary (CHO) cells using stably transfected production cell lines. Selections and amplifications with reagents such as methotrexate (MTX) are often required to achieve high producing stable cell lines.

High-yield expression of human vascular endothelial growth factor VEGF(165) in Escherichia coli and purification for therapeutic applications.

Vascular endothelial growth factor (VEGF(165)) is a potent mitogen that induces angiogenesis and vascular permeability in vivo and has demonstrated potential in therapeutic applications for accelerating wound healing. An industrial production method that provides high yield as well as high purity, quality, and potency is needed. The process described in this report involves a bacterial expression system capable of producing approximately 9g of rhVEGF per liter of broth and a downstream purification process consisting of protein refolding and three chromatography steps prior to formulation of the drug substance.

Characterization of a monoclonal antibody cell culture production process using a quality by design approach.

The goal of quality by design (QbD) in cell culture manufacturing is to develop manufacturing processes which deliver products with consistent critical quality attributes (CQAs). QbD approaches can lead to better process understanding through the use of process parameter risk ranking and statistical design of experiments (DOE). The QbD process starts with an analysis of process parameter risk with respect to CQAs and key performance indicators (KPIs).