Remotely Powered Two-Wire Cooperative Sensors for Bioimpedance Imaging Wearables.

Bioimpedance imaging aims to generate a 3D map of the resistivity and permittivity of biological tissue from multiple impedance channels measured with electrodes applied to the skin. When the electrodes are distributed around the body (for example, by delineating a cross section of the chest or a limb), bioimpedance imaging is called electrical impedance tomography (EIT) and results in functional 2D images. Conventional EIT systems rely on individually cabling each electrode to master electronics in a star configuration.

Remotely Powered Two-Wire Cooperative Sensors for Biopotential Imaging Wearables.

Biopotential imaging (e.g., ECGi, EEGi, EMGi) processes multiple potential signals, each requiring an electrode applied to the body's skin.

Evaluation of a Wearable System for Fetal ECG Monitoring Using Cooperative Sensors.

Fetal electrocardiography (fECG) has gotten widespread interest in the last years as technology for fetal monitoring. Compared to cardiotocography (CTG), the current state of the art, it can be designed in smaller formfactor and is thus suited for long-term and unsupervised monitoring. In the present study we evaluated a wearable system which is based on CSEM's cooperative sensors, a versatile technology that allows for the measurement of multiple biosignals and an easy integration into a garment or patch.

A Wearable Stethoscope for Long-Term Ambulatory Respiratory Health Monitoring.

Lung sounds acquired by stethoscopes are extensively used in diagnosing and differentiating respiratory diseases. Although an extensive know-how has been built to interpret these sounds and identify diseases associated with certain patterns, its effective use is limited to individual experience of practitioners. This user-dependency manifests itself as a factor impeding the digital transformation of this valuable diagnostic tool, which can improve patient outcomes by continuous long-term respiratory monitoring under real-life conditions.

ECG-Quality Assessment of Dry-Electrode Cooperative Sensors.

Classical approaches for measuring high-quality ECG require the use of gel electrodes and individually shielded cables, which limit patient comfort, especially in long-term use. We recently introduced a novel sensing architecture-so-called cooperative sensors-that allow the use of active dry electrodes connected by two unshielded wires. The aim of this work is to qualitatively evaluate an ECG recorded with a dry-electrode cooperative-sensor system.

Multimodal remote chest monitoring system with wearable sensors: a validation study in healthy subjects.

Objective: Development of wearable medical technology for remote monitoring of patients suffering from chronic lung diseases may improve the care, therapy and outcome of these patients.

Approach: A multimodal system using wearable sensors for the acquisition of multiple biosignals (electrical bioimpedance of the chest for electrical impedance tomography and respiratory rate assessment, peripheral oxygen saturation, chest sounds, electrocardiography for heart rate measurement, body activity, and posture) was developed and validated in a prospective, monocentric study on 50 healthy subjects. The subjects were studied under different types of ventilation (tidal and deep breathing, forced full expiration maneuver) and during increased body activity and posture changes.

Wearable Sensors for Frequency-Multiplexed EIT and Multilead ECG Data Acquisition.

This paper presents a wearable sensor architecture for frequency-multiplexed electrical impedance tomography (EIT) and synchronous multilead electrocardiogram (ECG) data acquisition. The system is based on a novel electronic sensing architecture, called cooperative sensors, that significantly reduces the cabling complexity and enables flexible EIT stimulation and measurement patterns. The cooperative-sensor architecture was initially designed for ECG and has been extended for multichannel bioimpedance measurement.

Two-Wire Bus Combining Full Duplex Body-Sensor Network and Multilead Biopotential Measurements.

Classical approaches to make high-quality measurements of biopotential signals require the use of shielded or multiwire cables connecting the electrodes to a central unit in a star arrangement. As a consequence, increasing the number of leads increases cabling and connector complexity, which is not only limiting the patient comfort but is also anticipated as the main limiting factor to future miniaturization and cost reduction of tomorrow's wearables. We have recently introduced a novel sensing architecture that significantly reduces the cabling complexity by eliminating shielded or multiwire cables and by allowing simple connectors, thanks to a bus arrangement.

Electrical impedance tomography (EIT) for quantification of pulmonary edema in acute lung injury.

Background: Assessment of pulmonary edema is a key factor in monitoring and guidance of therapy in critically ill patients. To date, methods available at the bedside for estimating the physiologic correlate of pulmonary edema, extravascular lung water, often are unreliable or require invasive measurements. The aim of the present study was to develop a novel approach to reliably assess extravascular lung water by making use of the functional imaging capabilities of electrical impedance tomography.

Synchronization and communication of cooperative sensors.

Cooperative sensors are an emerging technology consisting of autonomous sensor units working in concert to measure physiological signals requiring distant sensing points, such as biopotential (e.g., ECG) or bioimpedance (e.

Aortic blood pressure measured via EIT: investigation of different measurement settings.

Electrical impedance tomography (EIT) allows the measurement of intra-thoracic impedance changes related to cardiovascular activity. As a safe and low-cost imaging modality, EIT is an appealing candidate for non-invasive and continuous haemodynamic monitoring. EIT has recently been shown to allow the assessment of aortic blood pressure via the estimation of the aortic pulse arrival time (PAT).

Influence of heart motion on cardiac output estimation by means of electrical impedance tomography: a case study.

Electrical impedance tomography (EIT) is a non-invasive imaging technique that can measure cardiac-related intra-thoracic impedance changes. EIT-based cardiac output estimation relies on the assumption that the amplitude of the impedance change in the ventricular region is representative of stroke volume (SV). However, other factors such as heart motion can significantly affect this ventricular impedance change.