Solution-Processed Carbon Nanotube True Random Number Generator.

With the growing adoption of interconnected electronic devices in consumer and industrial applications, there is an increasing demand for robust security protocols when transmitting and receiving sensitive data. Toward this end, hardware true random number generators (TRNGs), commonly used to create encryption keys, offer significant advantages over software pseudorandom number generators. However, the vast network of devices and sensors envisioned for the "Internet of Things" will require small, low-cost, and mechanically flexible TRNGs with low computational complexity.

Radiation-Hard Complementary Integrated Circuits Based on Semiconducting Single-Walled Carbon Nanotubes.

Increasingly complex demonstrations of integrated circuit elements based on semiconducting single-walled carbon nanotubes (SWCNTs) mark the maturation of this technology for use in next-generation electronics. In particular, organic materials have recently been leveraged as dopant and encapsulation layers to enable stable SWCNT-based rail-to-rail, low-power complementary metal-oxide-semiconductor (CMOS) logic circuits. To explore the limits of this technology in extreme environments, here we study total ionizing dose (TID) effects in enhancement-mode SWCNT-CMOS inverters that employ organic doping and encapsulation layers.

Inkjet printed circuits based on ambipolar and p-type carbon nanotube thin-film transistors.

Ambipolar and p-type single-walled carbon nanotube (SWCNT) thin-film transistors (TFTs) are reliably integrated into various complementary-like circuits on the same substrate by inkjet printing. We describe the fabrication and characteristics of inverters, ring oscillators, and NAND gates based on complementary-like circuits fabricated with such TFTs as building blocks. We also show that complementary-like circuits have potential use as chemical sensors in ambient conditions since changes to the TFT characteristics of the p-channel TFTs in the circuit alter the overall operating characteristics of the circuit.

Controlled n-Type Doping of Carbon Nanotube Transistors by an Organorhodium Dimer.

Single-walled carbon nanotube (SWCNT) transistors are among the most developed nanoelectronic devices for high-performance computing applications. While p-type SWCNT transistors are easily achieved through adventitious adsorption of atmospheric oxygen, n-type SWCNT transistors require extrinsic doping schemes. Existing n-type doping strategies for SWCNT transistors suffer from one or more issues including environmental instability, limited carrier concentration modulation, undesirable threshold voltage control, and/or poor morphology.

Inkjet Printed Circuits on Flexible and Rigid Substrates Based on Ambipolar Carbon Nanotubes with High Operational Stability.

Inkjet printed ambipolar transistors and circuits with high operational stability are demonstrated on flexible and rigid substrates employing semiconducting single-walled carbon nanotubes (SWCNTs). All patterns, which include electrodes, semiconductors, and vias, are realized by inkjet printing without the use of rigid physical masks and photolithography. An Al2O3 layer deposited on devices by atomic layer deposition (ALD) transforms p-type SWCNT thin-film transistors (TFTs) into ambipolar SWCNT TFTs and encapsulates them effectively.

Layer-by-Layer Assembled 2D Montmorillonite Dielectrics for Solution-Processed Electronics.

Layer-by-layer assembled 2D montmorillonite nanosheets are shown to be high-performance, solution-processed dielectrics. These scalable and spatially uniform sub-10 nm thick dielectrics yield high areal capacitances of ≈600 nF cm(-2) and low leakage currents down to 6 × 10(-9) A cm(-2) that enable low voltage operation of p-type semiconducting single-walled carbon nanotube and n-type indium gallium zinc oxide field-effect transistors.

Solution-processed carbon nanotube thin-film complementary static random access memory.

Over the past two decades, extensive research on single-walled carbon nanotubes (SWCNTs) has elucidated their many extraordinary properties, making them one of the most promising candidates for solution-processable, high-performance integrated circuits. In particular, advances in the enrichment of high-purity semiconducting SWCNTs have enabled recent circuit demonstrations including synchronous digital logic, flexible electronics and high-frequency applications. However, due to the stringent requirements of the transistors used in complementary metal-oxide-semiconductor (CMOS) logic as well as the absence of sufficiently stable and spatially homogeneous SWCNT thin-film transistors, the development of large-scale SWCNT CMOS integrated circuits has been limited in both complexity and functionality.

Short Channel Field-Effect-Transistors with Inkjet-Printed Semiconducting Carbon Nanotubes.

Short channel field-effect-transistors with inkjet-printed semiconducting carbon nanotubes are fabricated using a novel strategy to minimize material consumption, confining the inkjet droplet into the active channel area. This fabrication approach is compatible with roll-to-roll processing and enables the formation of high-performance short channel device arrays based on inkjet printing.

Voltage-Controlled Ring Oscillators Based on Inkjet Printed Carbon Nanotubes and Zinc Tin Oxide.

A voltage-controlled ring oscillator is implemented with double-gate complementary transistors where both the n- and p-channel semiconductors are deposited by inkjet printing. Top gates added to transistors in conventional ring oscillator circuits control not only threshold voltages of the constituent transistors but also the oscillation frequencies of the ring oscillators. The oscillation frequency increases or decreases linearly with applied top gate potential.

High-speed, inkjet-printed carbon nanotube/zinc tin oxide hybrid complementary ring oscillators.

The materials combination of inkjet-printed single-walled carbon nanotubes (SWCNTs) and zinc tin oxide (ZTO) is very promising for large-area thin-film electronics. We compare the characteristics of conventional complementary inverters and ring oscillators measured in air (with SWCNT p-channel field effect transistors (FETs) and ZTO n-channel FETs) with those of ambipolar inverters and ring oscillators comprised of bilayer SWCNT/ZTO FETs. This is the first such comparison between the performance characteristics of ambipolar and conventional inverters and ring oscillators.

Utilizing carbon nanotube electrodes to improve charge injection and transport in bis(trifluoromethyl)-dimethyl-rubrene ambipolar single crystal transistors.

We have examined the significant enhancement of ambipolar charge injection and transport properties of bottom-contact single crystal field-effect transistors (SC-FETs) based on a new rubrene derivative, bis(trifluoromethyl)-dimethyl-rubrene (fm-rubrene), by employing carbon nanotube (CNT) electrodes. The fundamental challenge associated with fm-rubrene crystals is their deep-lying HOMO and LUMO energy levels, resulting in inefficient hole injection and suboptimal electron injection from conventional Au electrodes due to large Schottky barriers. Applying thin layers of CNT network at the charge injection interface of fm-rubrene crystals substantially reduces the contact resistance for both holes and electrons; consequently, benchmark ambipolar mobilities have been achieved, reaching 4.

Gate-tunable carbon nanotube-MoS2 heterojunction p-n diode.

The p-n junction diode and field-effect transistor are the two most ubiquitous building blocks of modern electronics and optoelectronics. In recent years, the emergence of reduced dimensionality materials has suggested that these components can be scaled down to atomic thicknesses. Although high-performance field-effect devices have been achieved from monolayered materials and their heterostructures, a p-n heterojunction diode derived from ultrathin materials is notably absent and constrains the fabrication of complex electronic and optoelectronic circuits.

Subnanowatt carbon nanotube complementary logic enabled by threshold voltage control.

In this Letter, we demonstrate thin-film single-walled carbon nanotube (SWCNT) complementary metal-oxide-semiconductor (CMOS) logic devices with subnanowatt static power consumption and full rail-to-rail voltage transfer characteristics as is required for logic gate cascading. These results are enabled by a local metal gate structure that achieves enhancement-mode p-type and n-type SWCNT thin-film transistors (TFTs) with widely separated and symmetric threshold voltages. These complementary SWCNT TFTs are integrated to demonstrate CMOS inverter, NAND, and NOR logic gates at supply voltages as low as 0.

Ambient-processable high capacitance hafnia-organic self-assembled nanodielectrics.

Ambient and solution-processable, low-leakage, high capacitance gate dielectrics are of great interest for advances in low-cost, flexible, thin-film transistor circuitry. Here we report a new hafnium oxide-organic self-assembled nanodielectric (Hf-SAND) material consisting of regular, alternating π-electron layers of 4-[[4-[bis(2-hydroxyethyl)amino]phenyl]diazenyl]-1-[4-(diethoxyphosphoryl) benzyl]pyridinium bromide) (PAE) and HfO2 nanolayers. These Hf-SAND multilayers are grown from solution in ambient with processing temperatures ≤150 °C and are characterized by AFM, XPS, X-ray reflectivity (2.

Inkjet Printing of High Conductivity, Flexible Graphene Patterns.

The ability to print high conductivity, conformal, and flexible electrodes is an important technological challenge in printed electronics, especially for large-area formats with low cost considerations. In this Letter, we demonstrate inkjet-printed, high conductivity graphene patterns that are suitable for flexible electronics. The ink is prepared by solution-phase exfoliation of graphene using an environmentally benign solvent, ethanol, and a stabilizing polymer, ethyl cellulose.

Aerosol jet printed, low voltage, electrolyte gated carbon nanotube ring oscillators with sub-5 μs stage delays.

A central challenge for printed electronics is to achieve high operating frequencies (short transistor switching times) at low supply biases compatible with thin film batteries. In this report, we demonstrate partially printed five-stage ring oscillators with >20 kHz operating frequencies and stage delays <5 μs at supply voltages below 3 V. The fastest ring oscillator achieved 1.

Air-stable all-inorganic nanocrystal solar cells processed from solution.

We introduce an ultrathin donor-acceptor solar cell composed entirely of inorganic nanocrystals spin-cast from solution. These devices are stable in air, and post-fabrication processing allows for power conversion efficiencies approaching 3% in initial tests. This demonstration elucidates a class of photovoltaic devices with potential for stable, low-cost power generation.