Effects of different organic substrate compositions on the decontamination of aged PAH-polluted soils through outdoor co-composting.

The effects of different organic substrate compositions on the efficiency of outdoor co-composting as a bioremediation technology for decontaminating soil polluted by polycyclic aromatic hydrocarbons (PAHs) were investigated. Four different substrate mixtures and two different aged PAH-contaminated soils were used in a semi-pilot-scale experiment that lasted nearly 700 days. The two soils (A and B) differed concerning both the initial concentrations of the Ʃ16 US EPA PAHs (5926 vs.

Characterization of the inhalable fraction (< 10 μm) of soil from highly urbanized and industrial environments: magnetic measurements, bioaccessibility, Pb isotopes and health risk assessment.

Soil in urban and industrial areas is one of the main sinks of pollutants. It is well known that there is a strong link between metal(loid)s bioaccessibility by inhalation pathway and human health. The critical size fraction is < 10 μm (inhalable fraction) since these particles can approach to the tracheobronchial region.

Sustainable use of composted sewage sludge: Metal(loid) leaching behaviour and material suitability for application on degraded soils.

Composted sewage sludge was investigated as a promising material for the reclamation or remediation of degraded sites. Using sewage sludge as soil amendment provides environmental benefits and risks while supporting circularity and waste minimisation. This study aims to comprehensively assess the suitability of locally available low-cost sludge treatment for sustainable and environmentally safe topsoil disposal in a brownfield area affected by coal mining.

Evaluating the effectiveness of sulfidated nano zerovalent iron and sludge co-application for reducing metal mobility in contaminated soil.

Sewage sludge has long been applied to soils as a fertilizer yet may be enriched with leachable metal(loid)s and other pollutants. Sulfidated nanoscale zerovalent iron (S-nZVI) has proven effective at metal sorption; however, risks associated with the use of engineered nanoparticles cannot be neglected. This study investigated the effects of the co-application of composted sewage sludge with S-nZVI for the stabilization of Cd, Pb, Fe, Zn.

Nano zerovalent Fe did not reduce metal(loid) leaching and ecotoxicity further than conventional Fe grit in contrasting smelter impacted soils: A 1-year field study.

The majority of the studies on nanoscale zero-valent iron (nZVI) are conducted at a laboratory-scale, while field-scale evidence is scarce. The objective of this study was to compare the metal(loid) immobilization efficiency of selected Fe-based materials under field conditions for a period of one year. Two contrasting metal(loid) (As, Cd, Pb, Zn) enriched soils from a smelter-contaminated area were amended with sulfidized nZVI (S-nZVI) solely or combined with thermally stabilized sewage sludge and compared to amendment with microscale iron grit.

Measuring Pb isotope ratios in fresh snow filtrate refines the apportioning of contaminant sources in the Arctic.

The remoteness and low population in the Arctic allow us to study global environmental processes, where the analysis of indicators can provide useful information about local and distant pollution sources. Fresh snow represents a convenient indicator of regional and transboundary atmospheric contamination sources, entrapping aerosols, and particulates like a natural autosampler of the environment. Lead stable isotopes are widely used to trace and monitor local and distant pollution sources.

Pyrolysed sewage sludge for metal(loid) removal and immobilisation in contrasting soils: Exploring variety of risk elements across contamination levels.

Efficient treatment of sewage sludge may transform waste into stable materials with minimised hazardous properties ready for secondary use. Pyrolysed sewage sludge, sludgechar, has multiple environmental benefits including contaminant sorption capacity and nutrient recycling. The properties of five sludgechars were tested firstly for adsorption efficiency in laboratory solutions before prospective application to soils.

Critically raw materials as potential emerging environmental contaminants, their distribution patterns, risks and behaviour in floodplain soils contaminated by heavy metals.

The expanding demand for new critical raw materials can lead to their increased release to the environment in the form of emerging environmental contaminants (EECs). However, there has never been a comprehensive study that takes into account the total EEC content, the content of various EEC fractions, their behaviour in floodplain soils, and potential ecological and human health risks. The occurrence, fractions, and influencing factors of the seven EECs (Li, Be, Sr, Ba, V, B, Se) originating from historical mining in floodplain soils of various ecosystems (arable lands, grasslands, riparian zones, contaminated sites) were investigated.

A perspective on the recovery mechanisms of spent lithium iron phosphate cathode materials in different oxidation environments.

Oxidative extraction has become an economically viable option for recycling lithium (Li) from spent lithium iron phosphate (LiFePO) batteries. In this study, the releases behaviour of Li from spent LiFePO batteries under different oxidizing conditions was investigated with sodium hypochlorite (NaClO) as the solid oxidant. We revealed that, due to the intervention of graphitic carbon, the generated species of Li in mechanochemical oxidation (NaClO:LiFePO at a molar ratio of 2:1, 5 min, and 600 rpm) was lithium carbonate (LiCO).

Assessment of natural and anthropogenic contamination sources in a Mediterranean aquifer by combining hydrochemical and stable isotope techniques.

The Atalanti basin is an intensively cultivated area in central Greece, facing groundwater quality deterioration threats due to natural and anthropogenic-related contamination sources. A combination of statistical and hydrogeochemical techniques, and stable isotope compositions (δH-HO and δΟ-ΗΟ, δΝ-ΝΟ and δΟ-ΝΟ, δS-SO and δO-SO) were applied to elucidate the origin of salinity and nitrate contamination, and shed light on the potential associations between geogenic Cr(VI) and NO sources and transformations. Nitrate and Cr(VI) concentrations reached up to 337 mg L and 76.

Remedial trial of sequential anoxic/oxic chemico-biological treatment for decontamination of extreme hexachlorocyclohexane concentrations in polluted soil.

During production of γ-hexachlorocyclohexane (γ-HCH), thousands of tons of other isomers were synthesized as byproducts, and after dumping represent sources of contamination for the environment. Several microbes have the potential for aerobic and anaerobic degradation of HCHs, and zero-valent iron is an effective remediation agent for abiotic dechlorination of HCHs, whereas the combination of the processes has not yet been explored. In this study, a sequence of anoxic/oxic chemico-biological treatments for the degradation of HCHs in a real extremely contaminated soil (10-30 g/kg) was applied.

Electroactive Fe-biochar for redox-related remediation of arsenic and chromium: Distinct redox nature with varying iron/carbon speciation.

Electroactive Fe-biochar has attracted significant attention for As(III)/Cr(VI) immobilization through redox reactions, and its performance essentially lies in the regulation of various Fe/C moieties for desired redox performance. Here, a series of Fe-biochar with distinct Fe/C speciation were rationally produced via two-step pyrolysis of iron minerals and biomass waste at 400-850 °C (BCX-Fe-Y, X and Y represented the first- and second-step pyrolysis temperature, respectively). The redox transformation of Cr(VI) and As(III) by Fe-biochar was evaluated in simulated wastewater under oxic or anoxic conditions.

Innovative in situ remediation of mine waters using a layered double hydroxide-biochar composite.

The current demand for alternative water sources requires the incorporation of low-cost composites in remediation technologies. These represent a sustainable alternative to more expensive, commercially used adsorbents. The main objective of this comprehensive field-scale study was to incorporate the layered double hydroxides (LDHs) into the hybrid biochar-based composites and apply an innovative material to remediate As/Sb-rich mine waters.

Cadmium Isotope Fractionation during Complexation with Humic Acid.

Cadmium (Cd) isotopes are known to fractionate during complexation with various environmentally relevant surfaces and ligands. Our results, which were obtained using (i) batch experiments at different Cd concentrations, ionic strengths, and pH values, (ii) modeling, and (iii) infrared and X-ray absorption spectroscopies, highlight the preferential enrichment of light Cd isotopes bound to humic acid (HA), leaving the heavier Cd pool preferentially in solution (ΔCd of -0.15 ± 0.

Contaminated soils of different natural pH and industrial origin: The role of (nano) iron- and manganese-based amendments in As, Sb, Pb, and Zn leachability.

Soils containing a large proportion of industrial waste can pose a health risk due to high environmentally available concentrations of toxic metal(loid)s. Nano zero-valent iron (nZVI) and amorphous manganese oxide (AMO) were applied as immobilising amendments (1 wt%) to soils with different industrial origin of As and Sb, and leaching of As, Sb, Pb, and Zn was investigated using a single extraction with deionised water. The different industrial impact was reflected in the mineralogy, chemical composition and pH of these soils.

Tracing the sources of bioaccessible metal(loid)s in urban environments: A multidisciplinary approach.

Understanding the links between sources of magnetic particles and bioaccessibility of metal(loids) in environmental sampling media is crucial for better evaluating human health risks, although relevant information in the scientific literature is scarce. Here, soil, road and house dust samples from a heavy industrial area in Greece were characterized in a multidisciplinary study combining magnetic measurements, SEM/EDS analyses, bioaccessibility measurements and Pb isotopic analyses of bioaccessible Pb. The oral and inhalable bioaccessible fractions of As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn were assessed by applying simulated gastric and lung solutions.

Nanoscale Zero-Valent Iron Has Minimum Toxicological Risk on the Germination and Early Growth of Two Grass Species with Potential for Phytostabilization.

Two species, and , were selected for their potential as phytostabilizing plants in multicontaminated soils. These species are resistant to contamination and maintain high concentrations of contaminants at the root level. Nanoscale zero-valent iron (nZVI) is an engineered nanomaterial with the ability to stabilize metal(loid)s in soils; its potential toxicological effects in the selected species were studied in a germination test using: (i) control variant without soil; (ii) soil contaminated with Pb and Zn; and (iii) contaminated soil amended with 1% nZVI, as well as in an hydroponic experiment with the addition of nZVI 0, 25, 50 and 100 mg L.

Metal(loid) and isotopic tracing of Pb in soils, road and house dusts from the industrial area of Volos (central Greece).

This study examines the metal(loid) contents (As, Cd, Cr, Cu, Mn, Ni, Pb, Sb, Tl and Zn) and Pb isotopes in different environmental compartments (soil, road dust, house dust) from the industrial vicinity of Volos, central Greece. The area surrounding two steel factories, a cement plant, an industrial area and the city core were considered as potential hot spots of metal(loid) contamination. Significant anthropogenic enrichments of Cd, Pb and Zn in relation to local baseline were identified for the soil (median Enrichment Factors of 7, 15 and 8, respectively) and road dusts around the steel factory located at Velestino area.

Health risk assessment of metal(loid)s in soil and particulate matter from industrialized regions: A multidisciplinary approach.

In this study, samples of soil and particulate matter obtained from the highly industrialized region of Ostrava, Czech Republic, are used for the toxicity evaluation of the selected metal(loid)s (Cd, Cr, Cu, Ni, Pb, Zn, As). We investigated the samples from sites supposedly affected the most by the local pollution sources using mineralogical techniques (XRD, SEM/EDS) to understand the solid speciation of the contaminants as the crucial factor affecting their release. Although the bulk composition was defined by common silicates and oxides that are rather resistant to leaching, the presence of tiny Ni, Pb, and/or Zn sulfate-like droplets indicated a potential increase of the solubility of these metals.

Assessment of biochar and/or nano zero-valent iron for the stabilisation of Zn, Pb and Cd: A temporal study of solid phase geochemistry under changing soil conditions.

The remediation of a soil contaminated with Zn, Pb and Cd was tested by using biochar (BC), nano zero-valent iron (nZVI) and a combination of these two (BC + nZVI). Each amendment was individually applied to the soil at 2 wt%. We tested the influence of (i) the used amendments, (ii) time, and (iii) soil moisture conditions on the metal availability and soil physico-chemical parameters using various extraction methods, as well as soil pore water samplings.

Seasonal fluctuations of Zn, Pb, As and Cd contents in the biomass of selected grass species growing on contaminated soils: Implications for in situ phytostabilization.

Phytostabilization aims to immobilize contaminants at the rhizosphere level using the root system of adapted plants. In order to exploit wild grasses with potential for phytostabilization, a screening throughout the year was conducted at a site contaminated by Pb and Zn. Three plant species were chosen: Agrostis capillaris, Arrhenatherum elatius and Calamagrostis epigeios.

Antimonate adsorption onto Mg-Fe layered double hydroxides in aqueous solutions at different pH values: Coupling surface complexation modeling with solid-state analyses.

In this study, the importance of Sb behavior under different pH conditions has been addressed with respect to its stabilization in aqueous solutions using Mg-Fe layered double hydroxides (LDHs). The Sb(V) adsorption onto Mg-Fe LDHs was performed at different initial Sb(V) concentrations and pH values (pH 5.5, 6.

The role of soil components in synthetic mixtures during the adsorption and speciation changes of Cr(VI): Conjunction of the modeling approach with spectroscopic and isotopic investigations.

This study investigates redox transitions associated with the adsorption of Cr(VI) on commonly occurring soil components (silicates, oxides and humic acids) and their synthetic mixtures by coupling the mechanistic surface complexation modeling with spectroscopic and isotopic analyses. The mixtures of soil components were prepared to reflect the composition of the real anthroposol sample, determined by X-ray Powder Diffraction (XRD), total organic carbon (TOC) measurement and extraction methods. The effect of different initial Cr(VI) concentrations (2×10, 5×10, 10, 10, and 10M), background electrolyte (10, 10, and 10M KNO), pH values (3-9), and sorbate/sorbent ratios (2g/L - 20g/L) were investigated.

Synthesis of modified amorphous manganese oxide using low-cost sugars and biochars: Material characterization and metal(loid) sorption properties.

In this study, amorphous Mn oxides (AMOs) and their composites with biochar (BC) were synthesized using different sugars (glucose, sucrose, and molasses), and their sorption efficiency toward Zn(II), Cd(II), and As(V) was tested. Additionally, detailed characterization of synthesized materials using various solid-state analysis methods (e.g.