Publications by authors named "Michael J Eller"

Extracellular vesicles (EVs) are nanoscale lipid bilayer particles secreted by cells. EVs may carry markers of the tissue of origin and its disease state, which makes them incredibly promising for disease diagnosis and surveillance. While the armamentarium of EV analysis technologies is rapidly expanding, there remains a strong need for multiparametric analysis with single EV resolution.

View Article and Find Full Text PDF

Extracellular vesicles (EVs) are nanoscale lipid bilayer particles secreted by cells. EVs may carry markers of the tissue of origin and its disease state which makes them incredibly promising for disease diagnosis and surveillance. While the armamentarium of EV analysis technologies is rapidly expanding, there remains a strong need for multiparametric analysis with single EV resolution.

View Article and Find Full Text PDF

Nanoscale molecular characterization plays a crucial role in enhancing our insights into fundamental and materials processes occurring at the nanoscale. However, for many traditional techniques, measurements on different ensembles are mixed and the analytical result reflects the average surface composition or arrangement. Advances in nanometrologies that allow for measurements to be differentiated based on the chemical environment examined are critical for accurate analysis.

View Article and Find Full Text PDF

Polyvinyl polymers bearing pendant hole transport functionalities have been extensively explored for solution-processed hole transport layer (HTL) technologies, yet there are only rare examples of high anisotropic packing of the HT moieties of these polymers into substrate-parallel orientations within HTL films. For small molecules, substrate-parallel alignment of HT moieties is a well-established approach to improve overall device performance. To address the longstanding challenge of extension from vapor-deposited small molecules to solution-processable polymer systems, a fundamental chemistry tactic is reported here, involving the positioning of HT side chains within macromolecular frameworks by the construction of HT polymers having bottlebrush topologies.

View Article and Find Full Text PDF

Extracellular vesicles (EVs) are lipid bilayer particles secreted from various cells. EVs carry molecular information of parent cells and hold considerable promise for early disease diagnostics. This paper describes a general strategy for multiplexed immunosensing of EV surface proteins, focusing on surface markers CD63, CD81, nephrin, and podocin to prove the concept.

View Article and Find Full Text PDF

We describe a technique based on secondary ion mass spectrometry with nanoprojectiles (NP-SIMS) for determining the protein content of extracellular vesicles, EVs, via tagged antibodies. The technique uses individual gold nanoprojectiles (e.g.

View Article and Find Full Text PDF

We present results from experiments and molecular dynamics (MD) simulations obtained with C and Au impacting on free-standing graphene, graphene oxide (GO), and graphene-supported molecular layers. The experiments were run on custom-built ToF reflectron mass spectrometers with C and Au-LMIS sources with acceleration potentials generating 50 keV C and 440-540 keV Au . Bombardment-detection was in the same mode as MD simulation, i.

View Article and Find Full Text PDF

This paper describes a label free technique for determining ligand loading on metal nanoparticles using a variant of secondary ion mass spectrometry. Au clusters bombard DNA-functionalized anisotropic gold nanostars and isotropic nanospheres with similar surface areas to determine ligand density. For each projectile impact, co-localized molecules within the emission area of a single impact (diameter of 10-15 nm) were examined for each particle.

View Article and Find Full Text PDF

We report on the ion emission from impacts of hypervelocity massive gold clusters for use in secondary ion mass spectrometry. Two massive gold clusters are considered, 520 keV Au and 1040 keV Au. The emission of fragment ions and molecular ions is evaluated for a series of neat samples, glycine, phenylalanine, arginine, and gramicidin S.

View Article and Find Full Text PDF

We present here the study of the individual hypervelocity massive projectiles (440-540 keV, 33-36 km/s Au cluster) impact on 1-layer free-standing graphene. The secondary ions were detected and recorded separately from each individual impact in the transmission direction using a time-of-flight mass spectrometer. We observed C ions emitted from graphene, the projectiles which penetrated the graphene, and the Au fragment ions in mass spectra.

View Article and Find Full Text PDF

Rationale: In Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS), pulsed and focused primary ion beams enable mass spectrometry imaging, a method which is particularly useful to map various small molecules such as lipids at the surface of biological samples. When using TOF-SIMS instruments, the focusing modes of the primary ion beam delivered by liquid metal ion guns can provide either a mass resolution of several thousand or a sub-µm lateral resolution, but the combination of both is generally not possible.

Methods: With a TOF-SIMS setup, a delayed extraction applied to secondary ions has been studied extensively on rat cerebellum sections in order to compensate for the effect of long primary ion bunches.

View Article and Find Full Text PDF

The study of the interaction of hypervelocity nano-particles with a 2D material and ultra-thin targets (single layer graphene, multi-layer graphene, and amorphous carbon foils) has been performed using mass selected gold nano-particles produced from a liquid metal ion source. During these impacts, a large number of atoms are ejected from the graphene, corresponding to a hole of ∼60 nm(2). Additionally, for the first time, secondary ions have been observed simultaneously in both the transmission and reflection direction (with respect to the path of the projectile) from a 2D target.

View Article and Find Full Text PDF

Diblock brush terpolymers (DBTs) with different fluorinated methacrylate-based block segments are synthesized through sequential ring-opening metathesis polymerizations and are used to prepare polymer thin films with predictable film thicknesses. These DBTs exhibit preferable substrate vertical alignments within the films, induced by the relatively lower surface energy of the fluorinated structural components, together with the overall cylindrical morphology of the brush architecture.

View Article and Find Full Text PDF

We describe a high-resolution, high-sensitivity negative-tone photoresist technique that relies on bottom-up preassembly of differential polymer components within cylindrical polymer brush architectures that are designed to align vertically on a substrate and allow for top-down single-molecule line-width imaging. By applying cylindrical diblock brush terpolymers (DBTs) with a high degree of control over the synthetic chemistry, we achieved large areas of vertical alignment of the polymers within thin films without the need for supramolecular assembly processes, as required for linear block copolymer lithography. The specially designed chemical compositions and tuned concentric and lengthwise dimensions of the DBTs enabled high-sensitivity electron-beam lithography of patterns with widths of only a few DBTs (sub-30 nm line-width resolution).

View Article and Find Full Text PDF

This letter presents the first application of high energy, single nanoparticle probes (e.g., 520 keV Au(400) 2nm NP) in the characterization of surfaces containing fluorescent proteins (e.

View Article and Find Full Text PDF

The strategy of decorating antibiofouling hyperbranched fluoropolymer-poly(ethylene glycol) (HBFP-PEG) networks with a settlement sensory deterrent, noradrenaline (NA), and the results of biofouling assays are presented. This example of a dual-mode surface, which combines both passive and active modes of antibiofouling, works in synergy to improve the overall antibiofouling efficiency against barnacle cyprids. The HBFP-PEG polymer surface, prior to modification with NA, was analyzed by atomic force microscopy, and a significant distribution of topographical features was observed, with a nanoscopic roughness measurement of 110 ± 8 nm.

View Article and Find Full Text PDF

In the present work, the advantages of a new, 100 kV platform equipped with a massive gold cluster source for the analysis of native biological surfaces are shown. Inspection of the molecular ion emission as a function of projectile size demonstrates a secondary ion yield increase of ~100× for 520 keV Au(400)(4+) as compared to 130 keV Au(3)(1+) and 43 keV C(60). In particular, yields of tens of percent of molecular ions per projectile impact for the most abundant components can be observed with the 520 keV Au(400)(4+) probe.

View Article and Find Full Text PDF

In this study, a time-of-flight secondary ion mass spectrometer TOF-SIMS, operating in the event-by-event bombardment/detection mode was used to characterize avidin-biotin assemblies on silane-modified glass substrates. SIMS was used to analyze several variants of the biointerface, including avidin physically adsorbed on a monofunctional acryl silane surface and covalently attached on monofunctional (amine terminated) and bifunctional (amine and acryl terminated) silanes. The goal of these studies was to determine density of avidin and biotin layers chemically or physically adsorbed on silanized glass substrate.

View Article and Find Full Text PDF

Cluster C(60) ToF-SIMS (time-of-flight secondary ion mass spectrometry) operated in the event-by-event bombardment-detection method has been applied to: a) quantify the binding density of Au nanoparticles (AuNPs)-antiCD4 conjugates on the cell surface; b) identify the binding sites between AuNPs and antibody. Briefly, our method consists of recording the secondary ions, SIs, individually emitted from a single C(60) (1,2+) impact. From the cumulative mass spectral data we selected events where a specific SI was detected.

View Article and Find Full Text PDF