Early patellofemoral cartilage and bone pathology in a rat model of noninvasive anterior cruciate ligament rupture.

Objective: Anterior cruciate ligament rupture (ACLR) is a risk factor for the development of post-traumatic osteoarthritis (PTOA). While PTOA in the tibiofemoral joint compartment is well-characterized, very little is known about pathology in the patellofemoral compartment after ACL injury. Here, we evaluated the extent to which ACLR induces early patellofemoral joint damage in a rat model.

Traumatic joint injury induces acute catabolic bone turnover concurrent with articular cartilage damage in a rat model of posttraumatic osteoarthritis.

Assess acute alterations in bone turnover, microstructure, and histomorphometry following noninvasive anterior cruciate ligament rupture (ACLR). Twelve female Lewis rats were randomized to receive noninvasive ACLR or Sham loading (n = 6/group). In vivo μCT was performed at 3, 7, 10, and 14 days postinjury to quantify compartment-dependent subchondral (SCB) and epiphyseal trabecular bone remodeling.

Automated MicroCT-based bone and articular cartilage analysis using iterative shape averaging and atlas-based registration.

Micro-computed tomography (μCT) and contrast-enhanced μCT are important tools for preclinical analysis of bone and articular cartilage (AC). Quantitative data from these modalities is highly dependent on the accuracy of tissue segmentations, which are often obtained via time-consuming manual contouring and are prone to inter- and intra-observer variability. Automated segmentation strategies could mitigate these issues, but few such approaches have been described in the context of μCT.

Pharmacological tools to mobilise mesenchymal stromal cells into the blood promote bone formation after surgery.

Therapeutic approaches requiring the intravenous injection of autologous or allogeneic mesenchymal stromal cells (MSCs) are currently being evaluated for treatment of a range of diseases, including orthopaedic injuries. An alternative approach would be to mobilise endogenous MSCs into the blood, thereby reducing costs and obviating regulatory and technical hurdles associated with development of cell therapies. However, pharmacological tools for MSC mobilisation are currently lacking.

Longitudinal characterization of intervertebral disc remodeling following acute annular injury in a rat model of degenerative disc disease.

: Characterize 3D remodeling of the rat intervertebral disc (IVD) following acute annular injury via micro-computed tomography (µCT), contrast-enhanced (CE)-µCT, and histology. : Female Lewis rats ( = 4/group) underwent either sham surgery or anterior annular puncture to L3-L4 and L5-L6 ( = 8 IVDs/group) to induce IVD degeneration. Rats were allowed cage activity before and after surgery and underwent µCT scanning at baseline and every 2 weeks post-op for 12 weeks to characterize longitudinal changes in IVD height.

Error introduced by common reorientation algorithms in the assessment of rodent trabecular morphometry using micro-computed tomography.

Quantitative analyses of bone using micro-computed tomography (μCT) are routinely employed in preclinical research, and virtual image reorientation to a consistent reference frame is a common processing step. The purpose of this study was to quantify error introduced by common reorientation algorithms in μCT-based characterization of bone. Mouse and rat tibial metaphyses underwent μCT scanning at a range of resolutions (6-30 μm).

Effect of Bisphosphonate Pretreatment on Fresh Osteochondral Allografts: Analysis of In Vitro Graft Structure and In Vivo Osseous Incorporation.

Fresh allograft transplantation of osteochondral defects restores functional articular cartilage and subchondral bone; however, rapid loss of chondrocyte viability during storage and osteoclast-mediated bone resorption at the graft-host interface after transplantation negatively impact outcomes. The authors present a pilot study evaluating the in vitro and in vivo impact of augmenting storage media with bisphosphonates. Forty cylindrical osteochondral cores were harvested from femoral condyles of human cadaveric specimens and immersed in either standard storage media or storage media supplemented with nitrogenated or non-nitrogenated bisphosphonates.

Nondestructive, indirect assessment of the biomechanical properties of the rat intervertebral disc using contrast-enhanced μCT.

Mechanical characterization of the intervertebral disc involves labor-intensive and destructive experimental methodology. Contrast-enhanced micro-computed tomography is a nondestructive imaging modality for high-resolution visualization and glycosaminoglycan quantification of cartilaginous tissues. The purpose of this study was to determine whether anionic and cationic contrast-enhanced micro-computed tomography of the intervertebral disc can be used to indirectly assess disc mechanical properties in an ex vivo model of disc degeneration.

Quantitative evaluation of retrieved reverse total shoulder arthroplasty liner surface deviation and volumetric wear.

Polyethylene wear is a known complication in total joint arthroplasty, however, in vivo wear rates in reverse total shoulder arthroplasty (RTSA) remain largely unknown. This study aimed to quantify volumetric and surface deviation changes in retrieved RTSA humeral liners using a novel micro-computed tomography (μCT)-based technique. After IRB-approval, 32 humeral liners (single manufacturer and model) with term-of-service greater than 90 days were analyzed.

Neer Award 2017: wear rates of 32-mm and 40-mm glenospheres in a reverse total shoulder arthroplasty wear simulation model.

Background: Larger glenosphere diameters have been used recently to increase prosthesis stability and impingement-free range of motion in reverse total shoulder arthroplasty. The goal of this study was to evaluate the rate of polyethylene wear for 32-mm and 40-mm glenospheres.

Methods: Glenospheres (32 mm and 40 mm, n = 6/group) and conventional polyethylene humeral liners underwent a 5-million cycle (MC) wear simulation protocol.

Articular cartilage surface roughness as an imaging-based morphological indicator of osteoarthritis: A preliminary investigation of osteoarthritis initiative subjects.

Current imaging-based morphometric indicators of osteoarthritis (OA) using whole-compartment mean cartilage thickness (MCT) and volume changes can be insensitive to mild degenerative changes of articular cartilage (AC) due to areas of adjacent thickening and thinning. The purpose of this preliminary study was to evaluate cartilage thickness-based surface roughness as a morphometric indicator of OA. 3D magnetic resonance imaging (MRI) datasets were collected from osteoarthritis initiative (OAI) subjects with Kellgren-Lawrence (KL) OA grades of 0, 2, and 4 (n = 10/group).

The influence of testing angle on the biomechanical properties of the rat supraspinatus tendon.

Rotator cuff tears are a common shoulder pathology. The rat supraspinatus tendon model is commonly employed for preclinical assessment of rotator cuff pathology or regeneration. However, there is a lack of a standardized biomechanical testing protocol; previous studies have tested the tendon at abduction angles ranging from -15° to 90°.

Contrast-enhanced μCT of the intervertebral disc: A comparison of anionic and cationic contrast agents for biochemical and morphological characterization.

The objective of this study was to quantify and compare the contrast-enhancing properties of the anionic contrast agent ioxaglate/Hexabrix, and cationic contrast agent CA for biochemical and morphological characterization of the intervertebral disc (IVD) via μCT. Optimal contrast agent concentrations were determined by incubating rat lumbar IVDs in dilutions of Hexabrix-320 (20%, 30%, 40%, and 50%) and CA (10, 20, 30, and 40 mg I/ml). μCT imaging was performed at 70 kVp, 114 μA, and 250 ms integration time, 12 μm voxel size.

Wear rates of retentive versus nonretentive reverse total shoulder arthroplasty liners in an in vitro wear simulation.

Background: Although short-term outcomes of reverse total shoulder arthroplasty (rTSA) remain promising, the most commonly cited complication remains prosthetic instability. A retentive rTSA liner is commonly used to increase system constraint; however, no studies have evaluated the rate of polyethylene wear. Our hypothesis was that more constrained retentive liners would have higher wear rates than nonretentive liners.

Wear rates of highly cross-linked polyethylene humeral liners subjected to alternating cycles of glenohumeral flexion and abduction.

Background: Although short-term outcomes of reverse total shoulder arthroplasty have been promising, long-term success may be limited due to device-specific complications, including scapular notching. Scapular notching has been explained primarily as mechanical erosion; however, the generation of wear debris may lead to further biologic changes contributing to the severity of scapular notching.

Methods: A 12-station hip simulator was converted to a reverse total shoulder arthroplasty wear simulator subjecting conventional and highly cross-linked ultra-high-molecular-weight polyethylene humeral liners to 5 million cycles of alternating abduction-adduction and flexion-extension loading profiles.

Off-Target Effects of BCR-ABL and JAK2 Inhibitors.

The advent of targeted oncolytic agents has created a revolution in the treatment of malignancies. Perhaps best exemplified in myeloproliferative neoplasms (MPN), the tyrosine kinase inhibitors, including inhibitors of BCR-ABL tyrosine kinase and JAK2, have dramatically changed outcomes in persons with MPN. However, clinically relevant dosing of these adenosine triphosphate-mimetic agents in humans leads to inhibition of numerous tyrosine kinases beyond those touted by drug manufacturers and studied in landmark clinical trials.