Carbon Nanotube-Polyurethane Composite Sheets for Flexible Thermoelectric Materials.

Integration of single-wall carbon nanotubes (SWCNTs) in the form of fabriclike sheets or other preformed assemblies (films, fibers, etc.) simplifies their handling and allows for composites with higher nanotube contents, which is needed to better exploit their outstanding properties and achieve multifunctional materials with improved performance. Here, we show the development of p-type SWCNT-thermoplastic polyurethane (TPU) fabric materials with a wide range of SWCNT contents (from 5 to 90 wt %) by employing a one-step filtration method using a suspension of SWCNTs in a TPU solvent/nonsolvent mixture.

Glass Fiber-Epoxy Composites with Boron Nitride Nanotubes for Enhancing Interlaminar Properties in Structures.

Hybrid composite materials are a class of materials where more than one type of reinforcement is integrated into a matrix to achieve superior properties. This typically involves nanoparticle fillers employed within traditional advanced composites with fiber reinforcements such as carbon or glass. The current study builds on previous investigations of boron nitride nanotube (BNNT) hybrid composites, specifically glass fiber (GF)-epoxy/BNNT composite laminates.

A comparative study of nano-fillers to improve toughness and modulus of polymer-derived ceramics.

Brittleness is a major limitation of polymer-derived ceramics (PDCs). Different concentrations of three nanofillers (carbon nanotubes, SiN and AlO nanoparticles) were evaluated to improve both toughness and modulus of a commercial polysilazane (PSZ) PDC. The PSZs were thermally cross-linked and pyrolyzed under isostatic pressure in nitrogen.

Fabrication of High Content Carbon Nanotube-Polyurethane Sheets with Tailorable Properties.

We have fabricated carbon nanotube (CNT)-polyurethane (TPU) sheets via a one-step filtration method that uses a TPU solvent/nonsolvent combination. This solution method allows for control of the composition and processing conditions, significantly reducing both the filtration time and the need for large volumes of solvent to debundle the CNTs. Through an appropriate selection of the solvents and tuning the solvent/nonsolvent ratio, it is possible to enhance the interaction between the CNTs and the polymer chains in solution and improve the CNT exfoliation in the nanocomposites.

Hydrogen-catalyzed, pilot-scale production of small-diameter boron nitride nanotubes and their macroscopic assemblies.

Boron nitride nanotubes (BNNTs) exhibit a range of properties that are as compelling as those of carbon nanotubes (CNTs); however, very low production volumes have prevented the science and technology of BNNTs from evolving at even a fraction of the pace of CNTs. Here we report the high-yield production of small-diameter BNNTs from pure hexagonal boron nitride powder in an induction thermal plasma process. Few-walled, highly crystalline small-diameter BNNTs (∼5 nm) are produced exclusively and at an unprecedentedly high rate approaching 20 g/h, without the need for metal catalysts.

Linear and nonlinear optical properties of carbon nanotube-coated single-mode optical fiber gratings.

Single-wall carbon nanotube deposition on the cladding of optical fibers has been carried out to fabricate an all-fiber nonlinear device. Two different nanotube deposition techniques were studied. The first consisted of repeatedly immersing the optical fiber into a nanotube supension, increasing the thickness of the coating in each step.

Novel method to produce single-walled carbon nanotube films and their thermal and electrical properties.

Single-walled carbon nanotube films are promising candidates for applications requiring transparent conductors due to their low sheet resistance and high transparency in the visible region. Vacuum filtration is a common and easy to implement technique to produce such films but it is complicated by the need to transfer the films to desired substrates. Here we report conditions under which single-walled carbon nanotube films produced by vacuum filtration detach from the filter membrane upon submersion into water, providing a facile method to transfer filtration-produced nanotube films to desired substrates.

Temperature excursions at the pulp-dentin junction during the curing of light-activated dental restorations.

Objectives: Excessive heat produced during the curing of light-activated dental restorations may injure the dental pulp. The maximum temperature excursion at the pulp-dentin junction provides a means to assess the risk of thermal injury. In this investigation we develop and evaluate a model to simulate temperature increases during light-curing of dental restorations and use it to investigate the influence of several factors on the maximum temperature excursion along the pulp-dentin junction.