Filling Unit Operation for Biological Drug Products: Challenges and Considerations.

One of the key unit operations during the aseptic fill-finish process of parenteral products, such as biologics, is the filling process of the formulated, sterile filtered drug substance into primary packaging containers. The applied filling technology as well as the process performance majorly impacts final drug product quality. The present review provides an overview of commonly used filling technologies during fill-finish operations of biologics including positive displacement pump systems such as radial peristaltic pump, rotary piston pump, rolling diaphragm pump, or innovative systems such as the linear peristaltic pump, as well as time-over-pressure filling technology.

Dynamics of obsidian procurement at Pot Creek Pueblo (LA 260), Northern New Mexico.

Unlabelled: We present obsidian sourcing data from Pot Creek Pueblo (LA 260), one of the northernmost Puebloan settlements in the Northern Rio Grande, occupied from at least 1260 ce until ca. 1320 ce when much of the pueblo was burned and the site was depopulated. Although the occupation of Pot Creek Pueblo was short, it occurred during a pivotal period in the Northern Rio Grande.

Preclinical Evidence for the Role of Botulinum Neurotoxin A (BoNT/A) in the Treatment of Peripheral Nerve Injury.

Traumatic peripheral nerve injuries tend to be more common in younger, working age populations and can lead to long-lasting disability. Peripheral nerves have an impressive capacity to regenerate; however, successful recovery after injury depends on a number of factors including the mechanism and severity of the trauma, the distance from injury to the reinnervation target, connective tissue sheath integrity, and delay between injury and treatment. Even though modern surgical procedures have greatly improved the success rate, many peripheral nerve injuries still culminate in persistent neuropathic pain and incomplete functional recovery.

EASL-ALEH 2015 algorithm for the use of transient elastography in treatment-naive patients with hepatitis B: An independent validation.

Various non-invasive methods have been evaluated in chronic hepatitis B, but none of them have been fully validated for the assessment of liver fibrosis. The issued EASL-ALEH 2015 guidelines provide detailed algorithms based on LSM and ALT serum levels. The aim of our study was to validate the diagnostic accuracy of this algorithm and to better understand discrepancies.

Functional basis for dose-dependent antagonism of rat and rabbit neuromuscular transmission by the bis-pyridinium oxime MMB4.

Organophosphorus (OP) compounds inhibit central and peripheral acetylcholinesterase (AChE) activity, overstimulating cholinergic receptors and causing autonomic dysfunction (e.g., bronchoconstriction, excess secretions), respiratory impairment, seizure and death at high doses.

An Ultrasonic Rheometer to Measure Gas Absorption in Ionic Liquids: Design, Calibration and Testing.

The first goal of this study is to identify the ideal piezoelectric material for the manufacturing of rheological reflectance ultrasonic sensors. The second goal is to integrate the ultrasonic rheometer within a gas absorption reactor and to measure viscosity changes in an ionic liquid (IL) caused by gas absorption. To achieve the objectives, bismuth titanate, lead titanate, lead metaniobate and lead zirconate titanate materials in layer, tungsten bronze and perovskite structures were assembled on aluminum delay lines and tested under thermal cycling between room temperature and 150 °C.

New GMP manufacturing processes to obtain thermostable HIV-1 gp41 virosomes under solid forms for various mucosal vaccination routes.

The main objective of the MACIVIVA European consortium was to develop new Good Manufacturing Practice pilot lines for manufacturing thermostable vaccines with stabilized antigens on influenza virosomes as enveloped virus-like particles. The HIV-1 gp41-derived antigens anchored in the virosome membrane, along with the adjuvant 3M-052 (TLR7/8 agonist) on the same particle, served as a candidate vaccine for the proof of concept for establishing manufacturing processes, which can be directly applied or adapted to other virosomal vaccines or lipid-based particles. Heat spray-dried powders suitable for nasal or oral delivery, and freeze-dried sublingual tablets were successfully developed as solid dosage forms for mucosal vaccination.

Protein-Polydimethylsiloxane Particles in Liquid Vial Monoclonal Antibody Formulations Containing Poloxamer 188.

Surfactants play an important role in stabilizing proteins in liquid formulations against aggregate/particle formation during processing, handling, storage, and transportation. Only 3 surfactants are currently used in marketed therapeutic protein formulations: polysorbate 20, polysorbate 80, and poloxamer 188. While polysorbates are the most widely used surfactants, their intrinsic oxidative and hydrolytic degradation issues highlights the importance of alternative surfactants such as poloxamer 188.

Natural Compounds and Their Analogues as Potent Antidotes against the Most Poisonous Bacterial Toxin.

Botulinum neurotoxins (BoNTs), the most poisonous proteins known to humankind, are a family of seven (serotype A to G) immunologically distinct proteins synthesized primarily by different strains of the anaerobic bacterium Being the causative agents of botulism, the toxins block neurotransmitter release by specifically cleaving one of the three soluble -ethylmaleimide-sensitive factor attachment receptor (SNARE) proteins, thereby inducing flaccid paralysis. The development of countermeasures and therapeutics against BoNTs is a high-priority research area for public health because of their extreme toxicity and potential for use as biowarfare agents. Extensive research has focused on designing antagonists that block the catalytic activity of BoNTs.

Botulinum Neurotoxin Detection Methods for Public Health Response and Surveillance.

Botulism outbreak due to consumption of food contaminated with botulinum neurotoxins (BoNTs) is a public health emergency. The threat of bioterrorism through deliberate distribution in food sources and/or aerosolization of BoNTs raises global public health and security concerns due to the potential for high mortality and morbidity. Rapid and reliable detection methods are necessary to support clinical diagnosis and surveillance for identifying the source of contamination, performing epidemiological analysis of the outbreak, preventing and responding to botulism outbreaks.

Evaluation of Container Closure System Integrity for Storage of Frozen Drug Products: Impact of Capping Force and Transportation.

Frozen-state storage and cold-chain transport are key operations in the development and commercialization of biopharmaceuticals. Today, several marketed drug products are stored (and/or shipped) under frozen conditions to ensure sufficient stability, particularly for live viral vaccines. When these products are stored in glass vials with stoppers, the elastomer of the stopper needs to be flexible enough to seal the vial at the target's lowest temperature to ensure container closure integrity and thus both sterility and safety of the drug product.

Amyloidoma of Stomach: A Case Report.

Objective: Amyloidomas are tumor-like deposits of amyloid. Amyloidoma of the gastrointestinal tract is rare. To the best of our knowledge, this is the first instance of diagnosis of an amyloidoma in the gastrointestinal tract by fine needle aspiration (FNA).

Yesterday and Today: The Impact of Research Conducted at Camp Detrick on Botulinum Toxin.

Introduction: This review summarizes the research conducted on botulinum toxin (BoTx) from 1943 to 1956 by a small group of Camp Detrick investigators and their staff. A systematic, cross-disciplinary approach was used to develop effective vaccines against this biological warfare threat agent. In response to the potential need for medical countermeasures against BoTx during World War II, the refinement of isolation and purification techniques for BoTx successfully led to the large-scale production of botulinum toxoid vaccines.

Small molecule metalloprotease inhibitor with in vitro, ex vivo and in vivo efficacy against botulinum neurotoxin serotype A.

Botulinum neurotoxins (BoNTs) are the most toxic substances known to mankind and are the causative agents of the neuroparalytic disease botulism. Their ease of production and extreme toxicity have caused these neurotoxins to be classified as Tier 1 bioterrorist threat agents and have led to a sustained effort to develop countermeasures to treat intoxication in case of a bioterrorist attack. While timely administration of an approved antitoxin is effective in reducing the severity of botulism, reversing intoxication requires different strategies.

Immuno-PCR with digital readout.

Immuno-PCR (IPCR) combines the versatile ELISA antigen detection with ultrasensitive PCR signal amplification, thereby enabling the highly sensitive detection of a broad range of targets with a typically very large dynamic detection range. The quantification of the antigen is usually achieved by real-time PCR, which provides a correlation between the target concentration and amplified DNA marker. We here report on the implementation of digital droplet PCR as a means for direct quantification of DNA copies to enable the highly sensitive detection of protein biomarkers.

Observational Case Series Evaluation of the Granisetron Transdermal Patch System (Sancuso) for the Management of Nausea/Vomiting of Pregnancy.

 The objective of this study was to observe the efficacy of antiemetic therapy (no emesis/retching episodes and no rescue medication use) when granisetron is administered via a transdermal patch system (TDS) in women who are 6 to 14 weeks pregnant when compared with oral ondansetron by evaluating the frequency of the use of rescue medications for control of nausea/vomiting of pregnancy (NVP).  This was an observational case series study to observe the potential benefits of granisetron TDS compared with oral ondansetron for management of NVP in pregnant patients during the first trimester. Dates of data collection were September 1, 2014, through December 31, 2015.

Clinical features of shiitake dermatitis: a systematic review.

Shiitake dermatitis is a rare cutaneous reaction to lentinan, a polysaccharide component in the cell walls of shiitake mushrooms (Lentinula edodes). Herein, we systematically review the case report and case series English-language literature on shiitake dermatitis, which refers to a total of 50 patients (38 males, 12 females; mean age: 44.58 years).

Newly Designed Quinolinol Inhibitors Mitigate the Effects of Botulinum Neurotoxin A in Enzymatic, Cell-Based, and ex Vivo Assays.

Botulinum neurotoxin A (BoNT/A) is one of the most deadly toxins and is the etiological agent of the potentially fatal condition, botulism. Herein, we investigated 8-hydroxyquinoline (quinolin-8-ol) as a potential inhibitor scaffold for preventing the deadly neurochemical effects of the toxin. Quinolinols are known chelators that can disrupt the BoNT/A metalloprotease zinc-containing active site, thus impeding its proteolysis of the endogenous protein substrate, synaptosomal-associated protein 25 (SNAP-25).

Mannitol/l-Arginine-Based Formulation Systems for Freeze Drying of Protein Pharmaceuticals: Effect of the l-Arginine Counter Ion and Formulation Composition on the Formulation Properties and the Physical State of Mannitol.

Previous studies have shown that protein storage stability in freeze-dried l-arginine-based systems improved in the presence of chloride ions. However, chloride ions reduced the glass transition temperature of the freeze concentrate (Tg') and made freeze drying more challenging. In this study, l-arginine was freeze dried with mannitol to obtain partially crystalline solids that can be freeze dried in a fast process and result in elegant cakes.

Artificial Leaks in Container Closure Integrity Testing: Nonlinear Finite Element Simulation of Aperture Size Originated by a Copper Wire Sandwiched between the Stopper and the Glass Vial.

Unlabelled: Container closure integrity (CCI) testing is required by different regulatory authorities in order to provide assurance of tightness of the container closure system against possible contamination, for example, by microorganisms. Microbial ingress CCI testing is performed by incubation of the container closure system with microorganisms under specified testing conditions. Physical CCI uses surrogate endpoints, such as coloration by dye solution ingress or gas flow (helium leakage testing).

Quality by Design Approaches to Formulation Robustness-An Antibody Case Study.

The International Conference on Harmonization Q8 (R2) includes a requirement that "Critical formulation attributes and process parameters are generally identified through an assessment of the extent to which their variation can impact the quality of the drug product," that is, the need to assess the robustness of a formulation. In this article, a quality-by-design-based definition of a "robust formulation" for a biopharmaceutical product is proposed and illustrated with a case study. A multivariate formulation robustness study was performed for a selected formulation of a monoclonal antibody to demonstrate acceptable quality at the target composition as well as at the edges of the allowable composition ranges and fulfillment of the end-of-shelf-life stability requirements of 36 months at the intended storage temperature (2°C-8°C).

Evaluation of Container Closure System Integrity for Frozen Storage Drug Products.

Unlabelled: Sometimes, drug product for parenteral administration is stored in a frozen state (e.g., -20 °C or -80 °C), particularly during early stages of development of some biotech molecules in order to provide sufficient stability.

The Pharmaceutical Capping Process-Correlation between Residual Seal Force, Torque Moment, and Flip-off Removal Force.

Unlabelled: The majority of parenteral drug products are manufactured in glass vials with an elastomeric rubber stopper and a crimp cap. The vial sealing process is a critical process step during fill-and-finish operations, as it defines the seal quality of the final product. Different critical capping process parameters can affect rubber stopper defects, rubber stopper compression, container closure integrity, and also crimp cap quality.