AC Kelvin Probe Force Microscopy Enables Charge Mapping in Water.

Mapping charged chemical groups at the solid-liquid interface is important in many areas, ranging from colloidal systems to biomolecular interactions. However, classical methods to measure surface charges either lack spatial resolution or─like Kelvin-probe force microscopy (KPFM)─cannot be applied in aqueous solutions because a DC bias voltage is used. Here, we show that using AC Kelvin probe force microscopy (AC-KPFM), in which the DC bias is replaced with an AC voltage of sufficiently high frequency, the surface potential of spatially fixated, charged surface groups can be mapped in aqueous solution.

Mechanical properties of collagen fibrils determined by buckling analysis.

The mechanical properties of biological nanofibers such as collagen fibrils are important in many applications, ranging from tissue-engineering to cancer treatment. However, mechanical testing is not straightforward at the nanometer scale. Here, we use the theory of column-buckling to determine the bending properties of individual collagen fibrils.

Mechanical Strain Alters the Surface Charge of Collagen Fibrils.

Collagen fibrils act like nanoscale cables in the extracellular matrix of vertebrate tissues and provide a scaffold for cells to attach to. However, beyond this mechanical function, the surface charge of collagen fibrils is also likely to play an important role. Here, we show that native, type I collagen fibrils from a mammal tendon exhibit a particular dependence of surface charge on longitudinal strain.

Glycation changes molecular organization and charge distribution in type I collagen fibrils.

Collagen fibrils are central to the molecular organization of the extracellular matrix (ECM) and to defining the cellular microenvironment. Glycation of collagen fibrils is known to impact on cell adhesion and migration in the context of cancer and in model studies, glycation of collagen molecules has been shown to affect the binding of other ECM components to collagen. Here we use TEM to show that ribose-5-phosphate (R5P) glycation of collagen fibrils - potentially important in the microenvironment of actively dividing cells, such as cancer cells - disrupts the longitudinal ordering of the molecules in collagen fibrils and, using KFM and FLiM, that R5P-glycated collagen fibrils have a more negative surface charge than unglycated fibrils.

Stretching Single Collagen Fibrils Reveals Nonlinear Mechanical Behavior.

The mechanical properties of collagen fibrils play an important role in cell-matrix interactions and are a manifestation of their molecular structure. Using a, to our knowledge, novel combination of uniaxial, longitudinal straining and radial nanoindentation, we found that type I collagen fibrils show a pronounced nonlinear behavior in the form of strain stiffening at strains from 0 to 15%, followed by strain softening at strains from 15 to 25%. At the molecular scale, this surprising phenomenon can be explained by the combination of unfolding of disordered domains and breaking of native cross-links at different stages of strain.

Signal reversal in Kelvin-probe force microscopy.

Kelvin-probe force microscopy is a measurement mode of atomic force microscopy, which is used to quantitatively map the electrical surface potential of a sample. Inadequate hardware and electronic design can lead to signal cross talk and, in consequence, false results. Here, we show that certain cross talk artifacts not only do manifest themselves in additional noise, reduced resolution, or an offset of the measured surface potential but can also lead to an inverted signal scale and, crucially, cannot be diagnosed with a known reference signal.

Water desorption in Kelvin-probe force microscopy: a generic model.

Nanoparticles or similar, nanoscale objects such as proteins or biological fibrils usually have to be deposited from aqueous suspension onto a solid support surface for further characterization by atomic force microscopy (AFM) and related methods such as Kelvin-probe force microscopy (KFM). Here we show, on the examples of functionalized nanoparticles and collagen fibrils, that water desorption after sample preparation affects their electrostatic potential determined by KFM in a predictable manner. We explain this effect with a simple, analytical model based on the capacitance of the partially dielectric-filled tip-sample system.

Evaluation of surface charge shift of collagen fibrils exposed to glutaraldehyde.

Collagen fibrils are a major component of the extracellular matrix. They form nanometer-scale "cables" acting as a scaffold for cells in animal tissues and are widely used in tissue-engineering. Besides controlling their structure and mechanical properties, it is crucial to have information of their surface charge, as this affects how cells attach to the scaffold.

Investigating the ability of nanoparticle-loaded hydroxypropyl methylcellulose and xanthan gum gels to enhance drug penetration into the skin.

Nanoparticle-loaded topical formulations can disrupt drug aggregation through controlled drug-nanoparticle interactions to enhance topical drug delivery. However, the complex relationship between the drug, nanoparticle and formulation vehicle requires further understanding. The aim of this study was to use nanoparticle-loaded hydroxypropyl methylcellulose (HPMC) and xanthan gum gels to probe how the drug, nanoparticle and formulation vehicle interactions influenced the delivery of an aggregated drug into the skin.

Assessing the Potential for Drug-Nanoparticle Surface Interactions To Improve Drug Penetration into the Skin.

There is continued debate as to how nanomaterials enhance the passive diffusion of drugs through the skin. This study examined if drug-nanoparticle surface interactions, which occurred during topical application, had the capability to enhance percutaneous penetration. Atomic force microscopy force adhesion measurements were used to demonstrate that a model drug, tetracaine, strongly adsorbed to the surface of a negatively charged carboxyl-modified polystyrene nanoparticle (NanoPSCOOH) through both its methyl and amine functionalities (up to a 6- and 16-fold greater adhesion force respectively compared with the CH3-CH3 control).

Investigating the influence of drug aggregation on the percutaneous penetration rate of tetracaine when applying low doses of the agent topically to the skin.

Understanding the molecular aggregation of therapeutic agents is particularly important when applying low doses of a drug to the surface of the skin. The aim of this study was to understand how the concentration of a drug influenced its molecular aggregation and its subsequent percutaneous penetration after topical application. A model drug tetracaine was shown to form a series of different aggregates across the μM (fluorescence spectroscopy) to mM (light scattering analysis) concentration range.

Young's modulus measurement on pig trachea and bronchial airways.

Young's Modulus was measured on the trachea and first three generations of pig airways by compression. A simple and low-cost system for measuring the elastic properties of small bio-materials is presented. The force-displacement measurements have been undertaken on dissected cartilage and trachea mucosa from pig trachea and bronchial segments.

The NanoBeamBalance: a passive, tensile-test device for the atomic force microscope.

An add-on device is presented, which significantly expands the force measurement capabilities of the atomic force microscope (AFM). The device consists of a completely passive mechanism, which translates the vertical motion of the AFM tip in force measurements into a horizontal motion of two sample support pads. The advantage is that it is much easier to deposit microscopic samples from suspension onto flat surfaces than to attach them reliably between tip and a surface.

Imaging surface charges of individual biomolecules.

Surface charges play a key role in determining the structure and function of proteins, DNA, and larger biomolecular structures. Here we report on the measurement of the electrostatic surface potential of individual DNA and avidin molecules with nanometer resolution using Kelvin probe force microscopy. We also show, for the first time, the surface potential of buffer salts shielding individual DNA molecules, which would not be possible with conventional ensemble techniques.

Nanoscale scraping and dissection of collagen fibrils.

The main function of collagen is mechanical, hence there is a fundamental scientific interest in experimentally investigating the mechanical and structural properties of collagen fibrils on the nanometre scale. Here, we present a novel atomic force microscopy (AFM) based scraping technique that can dissect the outer layer of a biological specimen. Applied to individual collagen fibrils, the technique was successfully used to expose the fibril core and reveal the presence of a D-banding-like structure.

Simultaneous investigation of the influence of topography and charge on protein adsorption using artificial nanopatterns.

The combined influence of surface topography and charge of a polymer surface on the adsorption of the protein avidin has been investigated. Atomic force microscopy contact mode imaging and charge writing were used to create defined topographical roughness and electrostatic charge patterns on the surface of polystyrene. Increased avidin adsorption was found on nanometer-size topographical patterns, but the adsorption remained unaffected by electrostatic patterns.

Back to basics: the development of a simple, homogenous, two-component dry-powder inhaler formulation for the delivery of budesonide using miscible vinyl polymers.

It was hypothesised that formulating a dry-powder inhaler (DPI) using a refined, smooth grade of lactose, without fines and a polymer coated drug microparticle should produce an homogeneous formulation in which aerosolization behaviour could be modified. Hence, the aim of this study was to develop a simple two component polymer coated-budesonide/lactose blend in which the drug microparticle adhesive forces could be optimised by modifying the drug coating in order to improve aerosolization from a DPI. Budesonide microparticles (1.

Preparation and characterization of dense films of poly(amidoamine) dendrimers on indium tin oxide.

Indium tin oxide (ITO) substrates were modified with a layer of poly(amidoamine) (PAMAM) dendrimers to change their surface properties and, in particular, the substrates' work function. The functionalization procedure involved the electrostatic adsorption of positively charged PAMAM dendrimers of generation five onto negatively polarized ITO surfaces. Three different PAMAM dendrimers were used: PAMAM-NH2 and PAMAM-OH with terminal amine and hydroxyl groups, respectively, as well as Q-PAMAM-NH2, which had been prepared from PAMAM-NH2 by quaternization of the dendrimer's terminal and internal amine groups with methyl iodide.

Mechanical properties of collagen fibrils.

The formation of collagen fibers from staggered subfibrils still lacks a universally accepted model. Determining the mechanical properties of single collagen fibrils (diameter 50-200 nm) provides new insights into collagen structure. In this work, the reduced modulus of collagen was measured by nanoindentation using atomic force microscopy.

Morphology and mechanical stability of amyloid-like peptide fibrils.

Synthetic, amyloid-like peptide fibrils have recently attracted interest as a novel, potentially biocompatible material for applications in biotechnology and tissue-engineering. In this paper, we report atomic force microscopy (AFM) studies of the morphology and mechanical stability of fibrils self-assembled in vitro from the short peptide TTR(105-115), which serves as a model system for amyloid fibrils. It forms predominantly straight rods of approximately 1 microm in length and of diameters between 7 nm and 12 nm.

Patterning amyloid peptide fibrils by AFM charge writing.

Surface charge patterns generated by atomic force microscopy-based charge writing were used to pattern amyloid-like peptide fibrils on a solid substrate. Fibrils of the short peptide TTR105-115 were encapsulated inside water droplets of a water-in-perfluorocarbon oil emulsion and retained their rod morphology. They were observed to deposit selectively with a lateral resolution of approximately 1 microm onto negatively charged patterns on a polymethyl-methacrylate substrate.

Guiding self-assembly with the tip of an atomic force microscope.

We report the guided self-assembly of nanoparticles to geometrically well-defined charge patterns written on a dielectric surface with the conductive tip of an atomic force microscope (AFM). Charges are deposited in 30-90-nm thick fluorocarbon layers by applying voltage pulses to the conductive AFM tip. The samples are being developed by dipping them into an organic suspension of silica nanoparticles.