Prediction of Mechanical Properties of Nano-Clay-Based Biopolymeric Composites.

An understanding of the mechanical behavior of polymeric materials is crucial for making advancements in the applications and efficiency of nanocomposites, and encompasses their service life, load resistance, and overall reliability. The present study focused on the prediction of the mechanical behavior of biopolymeric nanocomposites with nano-clays as the nanoadditives, using a new modeling and simulation method based on Comsol Multiphysics software 6.1.

Cooperative Effect of Chemical and Physical Processes for Flame Retardant Additives in Recycled ABS.

In the present work, the effectiveness of four non-halogenated flame retardants (FR) (aluminium trihydroxide (ATH), magnesium hydroxide (MDH), Sepiolite (SEP) and a mix of metallic oxides and hydroxides (PAVAL)) in blends with recycled acrylonitrile-butadiene-styrene (rABS) was studied in order to develop a more environmentally friendly flame-retardant composite alternative. The mechanical and thermo-mechanical properties of the obtained composites as well as their flame-retardant mechanism were evaluated by UL-94 and cone calorimetric tests. As expected, these particles modified the mechanical performance of the rABS, increasing its stiffness at the expense of reducing its toughness and impact behavior.

Role of Air Bubble Inclusion on Polyurethane Reaction Kinetics.

In this study, we investigated the influence of mixing conditions on the foaming process of water blown polyurethane (PU) foams obtained at different mixing speeds (50, 500, 1000 and 2000 rpm). In particular, the morphological evolution during the foaming process, in terms of the bubble size and bubble density, was studied via optical observations, while the effects on the reaction kinetics were monitored using in situ FTIR spectroscopy. At the slow mixing speed (50 rpm), no air bubbles were included and the early foaming process was characterized by the formation of new bubbles (CO nucleation), provided by the blowing reaction.

Characterization and Properties of Water-Blown Rigid Polyurethane Foams Reinforced with Silane-Modified Nanosepiolites Functionalized with Graphite.

In the present study, a promising flame retardant consisting of 80 wt% silane-modified nanosepiolites functionalized with 20 wt% graphite (SFG) is used to obtain a synergistic effect principally focussed on the thermal stability of water-blown rigid polyurethane (RPU) foams. Density, microcellular structure, thermal stability and thermal conductivity are examined for RPU foams reinforced with different contents of SFG (0, as reference material, 2, 4 and 6 wt%). The sample with 6 wt% SFG presents a slightly thermal stability improvement, although its cellular structure is deteriorated in comparison with the reference material.

Identification and Quantification of Cell Gas Evolution in Rigid Polyurethane Foams by Novel GCMS Methodology.

This paper presents a new methodology based on gas chromatography-mass spectrometry (GCMS) in order to separate and quantify the gases presented inside the cells of rigid polyurethane (RPU) foams. To demonstrate this novel methodology, the gas composition along more than three years of aging is herein determined for two samples: a reference foam and foam with 1.5 wt% of talc.

Influence of the Characteristics of Expandable Graphite on the Morphology, Thermal Properties, Fire Behaviour and Compression Performance of a Rigid Polyurethane Foam.

Three types of expandable graphite (EG) differing in particle size and expansion volume, are compared as flame retardant additives to rigid polyurethane foams (RPUFs). In this paper we discuss microstructure, thermal stability, fire behavior, and compression performance. We find that ell size distributions were less homogeneous and cell size was reduced.