Influence of defects on the femtosecond laser damage resistance of multilayer dielectric gratings.

Multilayer dielectric (MLD) gratings with high diffraction efficiency and a high laser-induced damage (LID) threshold for pulse compressors are key to scaling the peak and average power of chirped pulse amplification lasers. However, surface defects introduced by manufacturing, storage, and handling processes can reduce the LID resistance of MLD gratings and impact the laser output. The underlying mechanisms of such defect-initiated LID remain unclear, especially in the femtosecond regime.

Ultrafast Laser Material Damage Simulation-A New Look at an Old Problem.

The chirped pulse amplification technique has enabled the generation of pulses of a few femtosecond duration with peak powers multi-Tera and Peta-Watt in the near infrared. Its implementation to realize even shorter pulse duration, higher energy, and higher repetition rate laser systems relies on overcoming the limitations imposed by laser damage of critical components. In particular, the laser damage of coatings in the amplifiers and in post-compression optics have become a bottleneck.

Enhanced medium-range order in vapor-deposited germania glasses at elevated temperatures.

Glasses are nonequilibrium solids with properties highly dependent on their method of preparation. In vapor-deposited molecular glasses, structural organization could be readily tuned with deposition rate and substrate temperature. Here, we show that the atomic arrangement of strong network-forming GeO glass is modified at medium range (<2 nm) through vapor deposition at elevated temperatures.

Low Mechanical Loss TiO_{2}:GeO_{2} Coatings for Reduced Thermal Noise in Gravitational Wave Interferometers.

The sensitivity of current and planned gravitational wave interferometric detectors is limited, in the most critical frequency region around 100 Hz, by a combination of quantum noise and thermal noise. The latter is dominated by Brownian noise: thermal motion originating from the elastic energy dissipation in the dielectric coatings used in the interferometer mirrors. The energy dissipation is a material property characterized by the mechanical loss angle.

Constraints on Cosmic Strings Using Data from the Third Advanced LIGO-Virgo Observing Run.

We search for gravitational-wave signals produced by cosmic strings in the Advanced LIGO and Virgo full O3 dataset. Search results are presented for gravitational waves produced by cosmic string loop features such as cusps, kinks, and, for the first time, kink-kink collisions. A template-based search for short-duration transient signals does not yield a detection.

Polycyclic aromatic hydrocarbons in yerba mate () infusions and probabilistic risk assessment of exposure.

The aim of this study was to assess the risk of exposure to polycyclic aromatic hydrocarbons (PAH) from yerba mate infusions in Uruguay using the margin of exposure approach (MOE) and a probabilistic method (Monte Carlo simulation). Servings/day, portion size, weekly frequency of mate consumption and body weight were the factors considered. The amount in infusions of benz[a]pyrene (B[a]P), PAH2 (sum of chrysene and B[a]P), and PAH4 (sum of benz[a]anthracene, chrysene, benz[b]fluoranthene and B[a]P) were used as markers of PAH exposure.

Single-shot large field of view Fourier transform holography with a picosecond plasma-based soft X-ray laser.

It is challenging to obtain nanoscale resolution images in a single ultrafast shot because a large number of photons, greater than 10, are required in a single pulse of the illuminating source. We demonstrate single-shot high resolution Fourier transform holography over a broad 7 µm diameter field of view with ∼ 5 ps temporal resolution. The experiment used a plasma-based soft X-ray laser operating at 18.

Demonstration of a kilowatt average power, 1 J, green laser.

A =515 laser generating joule-level pulses at 1 kHz repetition rate was demonstrated by frequency doubling 1.2 J, 2 ns temporally shaped square pulses from a cryogenically cooled Yb:YAG laser in an LBO crystal. A doubling efficiency of 78% resulted in 0.

1.1 J Yb:YAG picosecond laser at 1 kHz repetition rate.

We demonstrate the generation of 1.1 J pulses of picosecond duration at 1 kHz repetition rate (1.1 kW average power) from a diode-pumped chirped pulse amplification Yb:YAG laser.

Isotopic Heterogeneity Imaged in a Uranium Fuel Pellet with Extreme Ultraviolet Laser Ablation and Ionization Time-of-Flight Mass Spectrometry.

We use extreme ultraviolet laser ablation and ionization time-of-flight mass spectrometry (EUV TOF) to map uranium isotopic heterogeneity at the nanoscale (≤100 nm). Using low-enriched uranium fuel pellets that were made by blending two isotopically distinct feedstocks, we show that EUV TOF can map the U/U content in 100 nm-sized pixels. The two-dimensional (2D) isotope maps reveal U ratio variations in sub-microscale to ≥1 μm areas of the pellet that had not been fully exposed by microscale or bulk mass spectrometry analyses.

Laser induced damage in coatings for cryogenic Yb:YAG active mirror amplifiers.

We report results of a study of the laser induced damage threshold (LIDT) behavior of ion beam sputtered / multilayer coatings on Yb:YAG using 1-on-1 and N-on-1 test protocols. The tests were conducted at ambient, vacuum, and cryogenic conditions using 280 ps pulses at =1030. The 1-on-1 LIDT of antireflection (AR) stacks is found to be only slightly reduced under vacuum and cryogenic conditions, while that of high reflectivity (HR) stacks is insensitive to environmental conditions within the uncertainty of the measurements.

Comparison of damage and ablation dynamics of multilayer dielectric films initiated by few-cycle pulses versus longer femtosecond pulses.

The importance of high intensity few- to single-cycle laser pulses for applications such as intense isolated attosecond pulse generation is constantly growing, and with the breakdown of the monochromatic approximation in field ionization models, the few-cycle pulse (FCP) interaction with solids near the damage threshold has ushered a new paradigm of nonperturbative light-matter interaction. In this Letter, we systematically study and contrast how femtosecond laser-induced damage and ablation behaviors of /-based reflective multilayer dielectric thin film systems vary between FCP and 110 fs pulses. With time-resolved surface microscopy and ex situ analysis, we show that there are distinct differences in the interaction depending on the pulse duration, specifically in the "blister" morphology formation at lower fluences (damage) as well as in the dynamics of debris formation at higher fluences (ablation).

Ultra-low stress SiO coatings by ion beam sputtering deposition.

High mechanical stress can affect the performance of multilayer thin film optical coatings, causing wavefront aberrations. This is particularly important if the multilayer stack is deposited onto thin substrates, such as those used in adaptive optics. Stress in thin film coatings is dependent on the deposition process, and ion beam sputtering (IBS) thin films are known to have high compressive stress.

Modifications of ion beam sputtered tantala thin films by secondary argon and oxygen bombardment.

Amorphous tantala () thin films were deposited by reactive ion beam sputtering with simultaneous low energy assist or /2+ bombardment. Under the conditions of the experiment, the as-deposited thin films are amorphous and stoichiometric. The refractive index and optical band gap of thin films remain unchanged by ion bombardment.

Growth and characterization of ScO doped TaO thin films.

We present the optical and structural characterization of films of , , and doped with a cation ratio around 0.1 grown by reactive sputtering. The addition of as a dopant induces the formation of tantalum suboxide due to the "oxygen getter" property of scandium.

Characterization of absorptance homogeneity in thin-film coatings for high-power lasers by thermal lensing microscopy.

A focus error method photothermal microscope was designed for the characterization of absorptance homogeneity in thin-film coatings for high-power lasers. The technique relies on the detection of the thermal lens induced by the local absorption of a light power focused laser. The detailed design of the instrument is presented.

High Precision Detection of Change in Intermediate Range Order of Amorphous Zirconia-Doped Tantala Thin Films Due to Annealing.

Understanding the local atomic order in amorphous thin film coatings and how it relates to macroscopic performance factors, such as mechanical loss, provides an important path towards enabling the accelerated discovery and development of improved coatings. High precision x-ray scattering measurements of thin films of amorphous zirconia-doped tantala (ZrO_{2}-Ta_{2}O_{5}) show systematic changes in intermediate range order (IRO) as a function of postdeposition heat treatment (annealing). Atomic modeling captures and explains these changes, and shows that the material has building blocks of metal-centered polyhedra and the effect of annealing is to alter the connections between the polyhedra.

Investigation of laser annealing mechanisms in thin film coatings by photothermal microscopy.

We study the evolution of the absorptance of amorphous metal oxide thin films when exposed to intense CW laser radiation measured using a photothermal microscope. The evolution of the absorptance is characterized by a nonexponential decay. Different models that incorporate linear and nonlinear absorption, free carrier absorption, and defect diffusion are used to fit the results, with constraints imposed on the fit parameters to scale with power and intensity.

Optical properties of oxygen vacancies in HfO thin films studied by absorption and luminescence spectroscopy.

Hafnium oxide thin films with varying oxygen content were investigated with the goal of finding the optical signature of oxygen vacancies in the film structure. It was found that a reduction of oxygen content in the film leads to changes in both, structural and optical characteristics. Optical absorption spectroscopy, using nanoKelvin calorimetry, revealed an enhanced absorption in the near-ultraviolet (near-UV) and visible wavelength ranges for films with reduced oxygen content, which was attributed to mid-gap electronic states of oxygen vacancies.

Depth-Profiling Microanalysis of CoNCN Water-Oxidation Catalyst Using a λ = 46.9 nm Plasma Laser for Nano-Ionization Mass Spectrometry.

Nanoscale depth profiling analysis of a CoNCN-coated electrode for water oxidation catalysis was carried out using table-top extreme ultraviolet (XUV) laser ablation time-of-flight mass spectrometry. The self-developed laser operates at λ = 46.9 nm and represents factor of 4 reduction in wavelength with respect to the 193 nm excimer laser.

Thin film absorption characterization by focus error thermal lensing.

A simple, highly sensitive technique for measuring absorbed power in thin film dielectrics based on thermal lensing is demonstrated. Absorption of an amplitude modulated or pulsed incident pump beam by a thin film acts as a heat source that induces thermal lensing in the substrate. A second continuous wave collimated probe beam defocuses after passing through the sample.

0.85 PW laser operation at 3.3 Hz and high-contrast ultrahigh-intensity λ = 400 nm second-harmonic beamline.

We demonstrate the generation of 0.85 PW, 30 fs laser pulses at a repetition rate of 3.3 Hz with a record average power of 85 W from a Ti:sapphire laser.

Strategies to increase laser damage performance of TaO/SiO mirrors by modifications of the top layer design.

TaO/SiO high reflection (HR) interference coatings for λ∼1  μm offer superior performance at high irradiance conditions. However, these coatings are not good candidates for high peak power conditions in comparison to HfO/SiO multilayer stacks. Here we show that the modification of the top layers design of a quarter wave TaO/SiO high reflector leads to 4-5 fold increase in the laser damage fluence compared to a quarter wave (TaO/SiO) when tested at λ=1.