Contribution to the Improvement of the Correlation Filter Method for Modal Analysis with a Spatial Light Modulator.

Modal decomposition of light is essential to study its propagation properties in waveguides and photonic devices. Modal analysis can be carried out by implementing a computer-generated hologram acting as a match filter in a spatial light modulator. In this work, a series of aspects to be taken into account in order to get the most out of this method are presented, aiming to provide useful operational procedures.

Encoding of arbitrary micrometric complex illumination patterns with reduced speckle.

In nonlinear microscopy, phase-only spatial light modulators (SLMs) allow achieving simultaneous two-photon excitation and fluorescence emission from specific region-of-interests (ROIs). However, as iterative Fourier transform algorithms (IFTAs) can only approximate the illumination of selected ROIs, both image formation and/or signal acquisition can be largely affected by the spatial irregularities of the illumination patterns and the speckle noise. To overcome these limitations, we propose an alternative complex illumination method (CIM) able to generate simultaneous excitation of large-area ROIs with full control over the amplitude and phase of light and reduced speckle.

Generation of multifocal irradiance patterns by using complex Fresnel holograms.

We experimentally demonstrate Fresnel holograms able to produce multifocal irradiance patterns with micrometric spatial resolution. These holograms are assessed from the coherent sum of multiple Fresnel lenses. The utilized encoded technique guarantees full control over the reconstructed irradiance patterns due to an optimal codification of the amplitude and phase information of the resulting complex field.

Effects of femtosecond laser and other surface treatments on the bond strength of metallic and ceramic orthodontic brackets to zirconia.

Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond laser-treated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zirconia.

Characterization of Tin/Ethylene Glycol Solar Nanofluids Synthesized by Femtosecond Laser Radiation.

Solar energy is available over wide geographical areas and its harnessing is becoming an essential tool to satisfy the ever-increasing demand for energy with minimal environmental impact. Solar nanofluids are a novel solar receiver concept for efficient harvesting of solar radiation based on volumetric absorption of directly irradiated nanoparticles in a heat transfer fluid. Herein, the fabrication of a solar nanofluid by pulsed laser ablation in liquids was explored.

Second-harmonic illumination to enhance multispectral digital lensless holographic microscopy.

Multispectral digital lensless holographic microscopy (MDLHM) operating with second-harmonic illumination is shown. Added to the improvement of the spatial resolution of the previously reported MDLHM operating with near-infrared illumination, this second-harmonic MDLHM shows promise as a tool to study the behavior of biological samples under a broad spectral illumination. This illumination is generated by focusing a highly spatially coherent ultrashort pulsed radiation into an uncoated Type 1 β-BaB2O4 (BBO) nonlinear crystal.

Parallel laser micromachining based on diffractive optical elements with dispersion compensated femtosecond pulses.

We experimentally demonstrate multi-beam high spatial resolution laser micromachining with femtosecond pulses. The effects of chromatic aberrations as well as pulse stretching on the material processed due to diffraction were significantly mitigated by using a suited dispersion compensated module (DCM). This permits to increase the area of processing in a factor 3 in comparison with a conventional setup.

Diffractive digital lensless holographic microscopy with fine spectral tuning.

We experimentally demonstrate an all-diffractive optical setup for digital lensless holographic microscopy with easy wavelength line selection and micrometric resolution. In the proposed system, an ultrashort laser pulse is focused with a diffractive lens (DL) onto a pinhole of diameter close to its central wavelength to achieve a highly spatially coherent illumination cone as well as a spectral line with narrow width. To scan the complete spectrum of the light source the DL is displaced with respect to the pinhole plane.

Dispersion management in two-photon microscopy by using diffractive optical elements.

We demonstrate efficient generation of wide-field fluorescence signals in two-photon microscopy exploiting diffractive optical elements and short pulses by using a dispersion-compensated beam delivery optics module. Computer-generated holograms are codified onto a phase-only spatial light modulator, which allows for arbitrary single-shot patterning of the sample. Spatiotemporal shaping of the pulse is mandatory to overcome spatial chirp and pulse-front tilt effects that spread both in space and time the irradiance patterns, thus limiting not only the spatial resolution but also the signal-to-noise ratio in two-photon microscopy.

Programmable quasi-direct space-to-time pulse shaper with active wavefront correction.

We experimentally demonstrate an extremely compact and programmable pulse shaper composed of a single phase mask encoded into a spatial light modulator. Its principle of operation is similar to the previously theoretically introduced quasi-direct space-to-time pulse shaper [Opt. Express16, 16993 (2008)], which is based on diffractive optics.

Synthesis of fractal light pulses by quasi-direct space-to-time pulse shaping.

We demonstrated a simple diffractive method to map the self-similar structure shown in squared radial coordinate of any set of circularly symmetric fractal plates into self-similar light pulses in the corresponding temporal domain. The space-to-time mapping of the plates was carried out by means of a kinoform diffractive lens under femtosecond illumination. The spatio-temporal characteristics of the fractal pulses obtained in this way were measured by means of a spectral interferometry technique assisted by a fiber optics coupler (STARFISH).

Multibeam second-harmonic generation by spatiotemporal shaping of femtosecond pulses.

We present a technique for efficient generation of the second-harmonic signal at several points of a nonlinear crystal simultaneously. Multispot operation is performed by using a diffractive optical element that splits the near-infrared light of a mode-locked Ti:sapphire laser into an arbitrary array of beams that are transformed into an array of foci at the nonlinear crystal. We show that, for pulse temporal durations under 100 fs, spatiotemporal shaping of the pulse is mandatory to overcome chromatic dispersion effects that spread both in space and time the foci showing a reduced peak intensity that prevents nonlinear phenomena.

Diffractive optics for spectral control of the supercontinuum generated in sapphire with femtosecond pulses.

We propose the use of kinoform diffractive lenses to focus near infrared femtosecond pulses in sapphire crystals for supercontinuum generation. It is shown that a strongly peaked structure appears in the blue region of the supercontinuum spectra. The central wavelength of this peak can be easily controlled by simply changing the lens-crystal distance.

Self-similar focusing with generalized devil's lenses.

We introduce the generalized devil's lenses (GDLs) as a new family of diffractive kinoform lenses whose structure is based on the generalized Cantor set. The focusing properties of different members of this family are analyzed. It is shown that under plane wave illumination the GDLs give a single main focus surrounded by many subsidiary foci.

Wavelength tuning of femtosecond pulses generated in nonlinear crystals by using diffractive lenses.

We demonstrate that diffractive lenses (DLs) can be used as a simple method to tune the central wavelength of femtosecond pulses generated from second-order nonlinear optical processes in birefringent crystals. The wavelength tunability is achieved by changing the relative distance between the nonlinear crystal and the DL, which acts in a focusing configuration. Besides the many practical applications of the so-generated pulses, the proposed method might be extended to other wavelength ranges by demonstrated similar effects on other nonlinear processes, such as high-order harmonic generation.

Spatio-temporal characterization of ultrashort pulses diffracted by circularly symmetric hard-edge apertures: theory and experiment.

We carry out a complete spatio-temporal characterization of the electric field of an ultrashort laser pulse after passing through a diffractive optical element composed of several binary amplitude concentric rings. Analytical expressions for the total diffraction field in the time and spectral domain are provided, using the Rayleigh-Sommerfeld formulation of the diffraction. These expressions are experimentally validated.

Reconfigurable all-diffractive optical filters using phase-only spatial light modulators.

We demonstrate a reconfigurable optical filter implemented using a phase-only two-dimensional liquid-crystal-on-silicon spatial light modulator. To achieve this we utilize two different approaches leading to two different configurations in the modulator. The first one, based on a spatially patterned diffractive lens, permits us to obtain the desired spectrum along the optical axis and, in the second one, which is based on a generalized spectrometer, the desired spectrum is found outside of the optical axis.

Diffractive pulse shaper for arbitrary waveform generation.

We propose an all-diffractive pulse shaper for arbitrary waveform generation in the femtosecond regime. This optical device improves in several aspects the performance of our previous quasi-direct pulse shaper reported in Mínguez-Vega et al. [Opt.