Expression of concern: Heat-based transdermal delivery of a ramipril loaded cream for treating hypertension.

Expression of concern for 'Heat-based transdermal delivery of a ramipril loaded cream for treating hypertension' by Anna Voronova , , 2022, , 12247-12256, https://doi.org/10.1039/D2NR02295H.

Focusing light with a metal film coated patchy particle.

Microsphere-assisted super-resolution imaging is a promising technique that can significantly enhance the resolution of conventional optical microscopes. The focus of a classical microsphere is called photonic nanojet, which is a symmetric high-intensity electromagnetic field. Recently, patchy microspheres have been reported to have superior imaging performance than pristine microspheres, and coating microspheres with metal films leads to the formation of photonic hooks, which can enhance the imaging contrast of microspheres.

Boron Nitride-Doped Polyphenylenic Organogels.

Herein, we describe the synthesis of the first boron nitride-doped polyphenylenic material obtained through a [4 + 2] cycloaddition reaction between a triethynyl borazine unit and a biscyclopentadienone derivative, which undergoes organogel formation in chlorinated solvents (the critical jellification concentration is 4% w/w in CHCl). The polymer has been characterized extensively by Fourier-transform infrared spectroscopy, solid-state C NMR, solid-state B NMR, and by comparison with the isolated monomeric unit. Furthermore, the polymer gels formed in chlorinated solvents have been thoroughly characterized and studied, showing rheological properties comparable to those of polyacrylamide gels with a low crosslinker percentage.

Heat-based transdermal delivery of a ramipril loaded cream for treating hypertension.

Angiotensin-converting enzyme (ACE) inhibitors play an important role in the development of anti-hypertension approaches, with ramipril being one of the most widely used ACE inhibitor prodrugs orally administered once or twice a day. Due to its low bioavailability, large amounts have to be administered to obtain a therapeutic effect. In this work, we propose a ramipril loaded pharmaceutical formulation in contact with an electrothermal actuator based on a gold nanohole array as an efficient approach to increase the transdermal ramipril flux.

High-resolution impedance mapping using electrically activated quantitative phase imaging.

Retrieving electrical impedance maps at the nanoscale rapidly via nondestructive inspection with a high signal-to-noise ratio is an unmet need, likely to impact various applications from biomedicine to energy conversion. In this study, we develop a multimodal functional imaging instrument that is characterized by the dual capability of impedance mapping and phase quantitation, high spatial resolution, and low temporal noise. To achieve this, we advance a quantitative phase imaging system, referred to as epi-magnified image spatial spectrum microscopy combined with electrical actuation, to provide complementary maps of the optical path and electrical impedance.

The impact of chemical engineering and technological advances on managing diabetes: present and future concepts.

Monitoring blood glucose levels for diabetic patients is critical to achieve tight glycaemic control. As none of the current antidiabetic treatments restore lost functional β-cell mass in diabetic patients, insulin injections and the use of insulin pumps are most widely used in the management of glycaemia. The use of advanced and intelligent chemical engineering, together with the incorporation of micro- and nanotechnological-based processes have lately revolutionized diabetic management.

Plasmon-Driven Electrochemical Methanol Oxidation on Gold Nanohole Electrodes.

Direct methanol oxidation is expected to play a central role in low-polluting future power sources. However, the sluggish and complex electro-oxidation of methanol is one of the limiting factors for any practical application. To solve this issue, the use of plasmonic is considered as a promising way to accelerate the methanol oxidation reaction.

Direct Visualization of Current-Stimulated Oxygen Migration in YBaCuO Thin Films.

The past years have witnessed major advancements in all-electrical doping control on cuprates. In the vast majority of cases, the tuning of charge carrier density has been achieved electric field effect by means of either a ferroelectric polarization or using a dielectric or electrolyte gating. Unfortunately, these approaches are constrained to rather thin superconducting layers and require large electric fields in order to ensure sizable carrier modulations.

Efficient capture and photothermal ablation of planktonic bacteria and biofilms using reduced graphene oxide-polyethyleneimine flexible nanoheaters.

Bacterial infections are one of the leading causes of disease worldwide. Conventional antibiotics are becoming less efficient, due to antibiotic-resistant bacterial strains. Therefore, the development of novel antibacterial materials and advanced treatment strategies are becoming increasingly important.

Electrothermal patches driving the transdermal delivery of insulin.

Transdermal patches have become a widely used approach for painless delivery of drugs. One major current limitation of these systems remains the restricted skin permeation of proteins and peptides as exemplified by insulin, necessitating different considerations for their successful transdermal delivery. We present a novel patch design based on the integration of nano-engineered heating elements on polyimide substrates for electrothermal transdermal therapy.

Publisher Correction: Statistics of thermomagnetic breakdown in Nb superconducting films.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Carbonyl-Based π-Conjugated Materials: From Synthesis to Applications in Lithium-Ion Batteries.

The constant growth in the global energy demand together with the increasing awareness of clean and sustainable development has strongly pushed scientists to search for metal-free, low-cost, environmentally friendly functional energy-storage systems (ESSs). Among the reported organic electrode materials, carbonyl-based π-conjugated compounds show excellent rate capabilities and cycling stabilities and are powerful candidates for the next generation of rechargeable lithium-ion batteries (LIBs). Benefiting from the molecular structure versatility and design feasibility, the electrochemical properties of organic and polymeric materials can be easily tuned.

High spatial resolution electrochemical biosensing using reflected light microscopy.

If the analyte does not only change the electrochemical but also the optical properties of the electrode/solution interface, the spatial resolution of an electrochemical sensor can be substantially enhanced by combining the electrochemical sensor with optical microscopy. In order to demonstrate this, electrochemical biosensors for the detection of hydrogen peroxide and glucose were developed by drop casting enzyme and redox polymer mixtures onto planar, optically transparent electrodes. These biosensors generate current signals proportional to the analyte concentration via a reaction sequence which ultimately changes the oxidation state of the redox polymer.

Kinked Silicon Nanowires: Superstructures by Metal-Assisted Chemical Etching.

We report on metal-assisted chemical etching of Si for the synthesis of mechanically stable, hybrid crystallographic orientation Si superstructures with high aspect ratio, above 200. This method sustains high etching rates and facilitates reproducible results. The protocol enables the control of the number, angle, and location of the kinks via successive etch-quench sequences.

Dopamine-functionalized cyclodextrins: modification of reduced graphene oxide based electrodes and sensing of folic acid in human serum.

A mandatory step in any sensor fabrication is the introduction of analyte-specific recognition elements to the transducer surface. In this study, the possibility to anchor β-cyclodextrin-modified dopamine to a reduced graphene oxide based electrochemical transducer for the sensitive and selective sensing of folic acid is demonstrated. The sensor displays good electrocatalytic activity toward the oxidation of folic acid.

Statistics of thermomagnetic breakdown in Nb superconducting films.

Superconductors are well known for their ability to screen out magnetic fields. In type-II superconductors, as the magnetic field pressure is progressively increased, magnetic flux accumulates at the periphery of the sample, very much like charges accumulate in a capacitor when voltage is increased. As for capacitors, exceeding certain threshold field causes the blocked magnetic flux to abruptly penetrate into the sample.

Graphene-modified electrodes for sensing doxorubicin hydrochloride in human plasma.

Doxorubicin (DOX), an anthracycline molecule, is currently one of the most widely used anticancer drugs in clinics. Systematic treatment of patients with DOX is known to be accompanied by several unpleasant side effects due to the toxicity of the drug. Thus, monitoring of DOX concentration in serum samples has become increasingly important to avoid side effects and ensure therapeutic efficiency.

Kinked silicon nanowires-enabled interweaving electrode configuration for lithium-ion batteries.

A tri-dimensional interweaving kinked silicon nanowires (k-SiNWs) assembly, with a Ni current collector co-integrated, is evaluated as electrode configuration for lithium ion batteries. The large-scale fabrication of k-SiNWs is based on a procedure for continuous metal assisted chemical etching of Si, supported by a chemical peeling step that enables the reuse of the Si substrate. The kinks are triggered by a simple, repetitive etch-quench sequence in a HF and HO-based etchant.

Quantitative magneto-optical investigation of superconductor/ferromagnet hybrid structures.

We present a detailed quantitative magneto-optical imaging study of several superconductor/ferromagnet hybrid structures, including Nb deposited on top of thermomagnetically patterned NdFeB and permalloy/niobium with erasable and tailored magnetic landscapes imprinted in the permalloy layer. The magneto-optical imaging data are complemented with and compared to scanning Hall probe microscopy measurements. Comprehensive protocols have been developed for calibrating, testing, and converting Faraday rotation data to magnetic field maps.

Flexible Nanoholey Patches for Antibiotic-Free Treatments of Skin Infections.

Despite the availability of different antibiotics, bacterial infections are still one of the leading causes of hospitalization and mortality. The clinical failure of antibiotic treatment is due to a general poor antibiotic penetration to bacterial infection sites as well as the development of antibiotic-resistant pathogens. In the case of skin infection, the wound is covered by exudate, making it impermeable to topical antibiotics.

Mechanochemical Synthesis of PEDOT:PSS Hydrogels for Aqueous Formulation of Li-Ion Battery Electrodes.

Water-soluble binders can enable greener and cost-effective Li-ion battery manufacturing by eliminating the standard fluorine-based formulations and associated organic solvents. The issue with water-based dispersions, however, remains the difficulty in stabilizing them, requiring additional processing complexity. Herein, we show that mechanochemical conversion of a regular poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) water-based dispersion produces a hydrogel that meets all the requirements as binder for lithium-ion battery electrode manufacture.

Charge and spin transport in single and packed ruthenium-terpyridine molecular devices: Insight from first-principles calculations.

Using first-principles calculations, we study the electronic and transport properties of rutheniumterpyridine molecules sandwiched between two Au(111) electrodes. We analyse both single and packed molecular devices, more amenable to scaling and realistic integration approaches. The devices display all together robust negative differential resistance features at low bias voltages.

Surveying colloid sedimentation by coplanar waveguides.

By using coplanar waveguides, direct access to the dielectric properties of aqueous solutions of polystyrene beads with different diameters from 330 nm to 10 μm is provided. The relative variation of the transmission parameter with respect to water is monitored, ranging from [Formula: see text] obtained for a 9.5% solution with 330 nm diameter beads to ∼22% for 10 μm diameter particles at the same concentration.

Carbon Redox-Polymer-Gel Hybrid Supercapacitors.

Energy storage devices that provide high specific power without compromising on specific energy are highly desirable for many electric-powered applications. Here, we demonstrate that polymer organic radical gel materials support fast bulk-redox charge storage, commensurate to surface double layer ion exchange at carbon electrodes. When integrated with a carbon-based electrical double layer capacitor, nearly ideal electrode properties such as high electrical and ionic conductivity, fast bulk redox and surface charge storage as well as excellent cycling stability are attained.