We fabricated ultrathin metal - oxide - semiconductor (MOS) nanocapacitors using atomic layer deposition. The capacitors consist of a bilayer of Al2O3 and Y2O3 with a total thickness of ~10 nm, deposited on silicon substrate. The presence of the two materials, each slab being ~5 nm thick and uniform over a large area, was confirmed with Transmission Electron Microscopy and X-ray photoelectron spectroscopy (XPS).
View Article and Find Full Text PDFConventional magnetophotonic nanostructures typically function within narrow wavelength and incident angle ranges, where resonance is observed and magneto-optical (MO) effects are amplified. Expanding these operational ranges may allow for improved applications, including in (bio)sensing devices. In this study, we describe a hybrid magnetoplasmonic waveguide grating (HMPWG) in which the coupling of plasmonic resonances and waveguide modes leads to enhanced MO effects and sensitivity, according to full-wave electromagnetic simulations.
View Article and Find Full Text PDFAll-dielectric magnetophotonic nanostructures are promising for integrated nanophotonic devices with high resolution and sensitivity, but their design requires computationally demanding electromagnetic simulations evaluated through trial and error. In this paper, we propose a machine-learning approach to accelerate the design of these nanostructures. Using a data set of 12 170 samples containing four geometric parameters of the nanostructure and the incidence wavelength, trained neural network and polynomial regression algorithms were capable of predicting the amplitude of the transverse magneto-optical Kerr effect (TMOKE) within a time frame of 10 s and mean square error below 4.
View Article and Find Full Text PDFIn this Letter, we introduce a concept to produce high-resolution, highly integrable biosensing devices. Our idea exploits the highly absorbing modes in multilayered metamaterials to maximize the transverse magneto-optical Kerr effect (TMOKE). Results are discussed in the context of dielectric uniaxial ( >0) and hyperbolic metamaterial ( <0) regimes.
View Article and Find Full Text PDFIn this work, we combine the concepts of magnetic circular dichroism, nanocavities, and magneto-optical hyperbolic metamaterials (MO-HMMs) to demonstrate an approach for sensing down to a few molecules. Our proposal comprises a multilayer MO-HMM with a square, two-dimensional arrangement of nanocavities. The magnetization of the system is considered in polar configuration, i.
View Article and Find Full Text PDFThe engineering of the spatial and temporal properties of both the electric permittivity and the refractive index of materials is at the core of photonics. When vanishing to zero, those two variables provide efficient knobs to control light-matter interactions. This Perspective aims at providing an overview of the state of the art and the challenges in emerging research areas where the use of near-zero refractive index and hyperbolic metamaterials is pivotal, in particular, light and thermal emission, nonlinear optics, sensing applications, and time-varying photonics.
View Article and Find Full Text PDFWe demonstrate a concept for the active manipulation of radiated fields by a magnetoplasmonic half-wave dipole nanoantenna. Our idea comprises a two arms nanoantenna, made of metallic ferromagnetic cobalt-silver alloy (CoAg), inspired by the analogous radio frequency half-wave dipole antenna design. Numerical results, obtained under the magnetization saturation condition, indicate a tilting of the radiated beam depending on the magnitude and sense of the magnetization of the ferromagnetic material.
View Article and Find Full Text PDFOn-chip wireless communications require optical nanoantennas with dynamically tunable radiation patterns, which may allow for higher integration with multiple nanoantennas instead of two fixed nanoantennas in existing approaches. In this paper, we introduce a concept to enable active manipulation of radiated beam steering using applied magnetic fields. The proposed system consists of a highly directive Yagi-Uda-like arrangement of magnetoplasmonic nanoribs made of CoAg and immersed in SiO.
View Article and Find Full Text PDFWe demonstrate, numerically, a new concept for on-chip magneto-optical (MO) modulation in dense wavelength division multiplexing (DWDM) applications. Our idea uses materials and mechanisms that are compatible with current silicon-on-insulator fabrication and CMOS technologies for monolithic integration. The physics behind our idea stems in the exploitation of the enhanced MO activity of a micro-ring, made of cerium substituted yttrium iron garnet (Ce:YIG) material, to actively manipulate the resonance wavelengths of an adjacent micro-ring resonator (MRR) of silicon (Si).
View Article and Find Full Text PDFOptical wireless transmission has recently become a major cutting-edge alternative for on-chip/inter-chip communications with higher transmission speeds and improved power efficiency. Plasmonic nanoantennas, the building blocks of this new nanoscale communication paradigm, require precise design to have directional radiation and improved communication ranges. Particular interest has been paid to plasmonic Yagi-Uda, i.
View Article and Find Full Text PDFWe demonstrate a concept for the giant enhancement of the transverse magneto-optical Kerr effect (TMOKE) using bulk plasmon polariton (BPP) modes in non-magnetic multilayer hyperbolic metamaterials (HMMs). Since the BPP modes are excited through the attenuated total reflection (ATR) mechanism, using a Si-based prism-coupler, we considered a single dielectric magneto-optical (MO) spacer between the prism and the HMM. The working wavelength was estimated, using the effective medium approach for a semi-infinite dielectric-plasmonic multilayer, considering the region where the system exhibits type II HMM dispersion relations.
View Article and Find Full Text PDFMagnetoplasmonic permittivity-near-zero (ε-near-zero) nanostructures hold promise for novel highly integrated (bio)sensing devices. These platforms merge the high-resolution sensing from the magnetoplasmonic approach with the ε-near-zero-based light-to-plasmon coupling (instead of conventional gratings or bulky prism couplers), providing a way for sensing devices with higher miniaturization levels. However, the applications are mostly hindered by tedious and time-consuming numerical analyses, due to the lack of an analytical relation for the phase-matching condition.
View Article and Find Full Text PDFPhys Chem Chem Phys
March 2022
All-dielectric nanophotonic devices are promising candidates for future lossless (bio)sensing and telecommunication applications. Active all-dielectric magnetophotonic devices, where the optical properties can be controlled by an externally applied magnetic field, have triggered great research interest. However, magneto-optical (MO) effects are still low for applications.
View Article and Find Full Text PDFWe demonstrate a concept for a large enhancement of the directivity and gain of readily available cm- and mm-wave antennas, i.e., without altering any property of the antenna design.
View Article and Find Full Text PDFNanostructures exhibiting large transverse magneto-optical Kerr effect (TMOKE) are required for magnetoplasmonic biosensing if the aim is the minituarization and integration into microfluidic devices. In this work, we present a general strategy to design nanoarchitectures with enhanced TMOKE, which consist of an arrangement of gold ribs deposited on an magneto-optical (MO) dielectric slab of Bi:YIG (bismuth-substituted yttrium iron garnet) with a SiO substrate surrounded by water. Using the finite element method (FEM), we demonstrate numerically that the near-zero-transmittance condition is the most important requirement for high TMOKE values.
View Article and Find Full Text PDFA challenge in plasmonic trapping of small nanoparticles is the heating due to the Joule effect of metallic components. This heating can be avoided with electromagnetic field confinement in high-refractive-index materials, but nanoparticle trapping is difficult because the electromagnetic fields are mostly confined inside the dielectric nanostructures. Herein, we present the design of an all-dielectric platform to capture small dielectric nanoparticles without heating the nanostructure.
View Article and Find Full Text PDFWe numerically demonstrate an all-dielectric approach for magnetically tunable add/drop of optical channels in dense wavelength division multiplexing applications. Our concept comprises a micro-ring resonator, with an inner magneto-optical disk, side-coupled to two waveguides. The simulation results, obtained within the ITU-T G.
View Article and Find Full Text PDFWe report on the design of a low-profile integrated millimeter-wave antenna for efficient and broadband circularly polarized electromagnetic radiation. The designed antenna comprises a chiral dielectric metasurface built with a 2×2 arrangement of dielectric cylinders with slanted-slots at the center. A broadbeam high-gain with wide axial ratio (AR)<3 dB bandwidth was reached by pairing the electric and magnetic resonances of the dielectric cylinders and the slanted slots when excited by an elliptically polarized driven-patch antenna.
View Article and Find Full Text PDFWe investigate the plasmonic behavior of a fractal photonic crystal fiber, with Sierpinski-like circular cross-section, and its potential applications for refractive index sensing and multiband polarization filters. Numerical results were obtained using the finite element method through the commercial software COMSOL Multiphysics. A set of 34 surface plasmon resonances was identified in the wavelength range from λ=630 nm to λ=1700 nm.
View Article and Find Full Text PDFThe design of optoelectronic devices made with ZnO superlattices requires the knowledge of the refractive index, which currently can be done only for films thicker than 30 nm. In this work, we present an effective medium approach to determine the refractive index of ZnO layers as thin as 2 nm. The approach was implemented by determining the refractive index of ZnO layers ranging from 2 nm to 20 nm using spectroscopic ellipsometry measurements in multilayers.
View Article and Find Full Text PDFWe study here the vehicle-to-vehicle (V2V) visible light communication (VLC) between two cars moving along different roadway scenarios: (i) a multiple-lane rectilinear roadway and (ii) a multiple-lane curvilinear roadway. Special emphasis was given to the implementation of full-duplex (FD) cooperative communication protocols to avoid communication disruption in the absence of a line-of-sight (LOS) channel. Importantly, we found that the cooperative FD V2V-VLC is promising for avoiding communication disruptions for cars traveling in realistic curvilinear roadways.
View Article and Find Full Text PDFPlasmonic materials, when properly illuminated with visible or near-infrared wavelengths, exhibit unique and interesting features that can be exploited for tailoring and tuning the light radiation and propagation properties at nanoscale dimensions. A variety of plasmonic heterostructures have been demonstrated for optical-signal filtering, transmission, detection, transportation, and modulation. In this review, state-of-the-art plasmonic structures used for telecommunications applications are summarized.
View Article and Find Full Text PDFPoint-of-care (PoC) diagnostics is promising for early detection of a number of diseases, including cancer, diabetes, and cardiovascular diseases, in addition to serving for monitoring health conditions. To be efficient and cost-effective, portable PoC devices are made with microfluidic technologies, with which laboratory analysis can be made with small-volume samples. Recent years have witnessed considerable progress in this area with "epidermal electronics", including miniaturized wearable diagnosis devices.
View Article and Find Full Text PDFThe ability of plasmonic structures to confine and enhance light at nanometer length scales has been traditionally exploited to boost the magneto-optical effects in magneto-plasmonic structures. These platforms allows for light control via externally applied magnetic fields, which is of prime importance for sensing, data storage, optical-isolation, and telecommunications applications. However, applications are hindered by the high-level of ohmic losses associated to metallic and ferromagnetic components.
View Article and Find Full Text PDF