Gingival Debulking Surgery for a Child With Severe Aplastic Anemia: A Case Report.

Introduction: Aplastic anemia (AA) is a rare condition that frequently manifests with pancytopenia. Management of severe disease is through either allogenic stem cell transplantation or immunosuppressive therapy with supportive care. Drug-induced gingival overgrowth (DIGO) is a potential complication of a number of medications, including cyclosporine and amlodipine.

3D Printed Organisms Enabled by Aspiration-Assisted Adaptive Strategies.

Devising an approach to deterministically position organisms can impact various fields such as bioimaging, cybernetics, cryopreservation, and organism-integrated devices. This requires continuously assessing the locations of randomly distributed organisms to collect and transfer them to target spaces without harm. Here, an aspiration-assisted adaptive printing system is developed that tracks, harvests, and relocates living and moving organisms on target spaces via a pick-and-place mechanism that continuously adapts to updated visual and spatial information about the organisms and target spaces.

Maternal Exposure to Red Rooibos Does Not Alter Bone Development in Male or Female Sprague-Dawley Rat Offspring.

Maternal diet during pregnancy and/or throughout lactation provides a potential opportunity for nutritional programming of offspring bone development. Objectives of this study were to determine whether maternal consumption of red rooibos (RR) throughout pregnancy and lactation improved bone mineral density (BMD), bone structure, and bone strength in offspring and to determine potential sex-specific responses. Female Sprague-Dawley rats were randomly assigned to control water or RR in water (2600 mg/kg body weight/d) from prepregnancy through to the end of lactation.

3D printed microfluidics: advances in strategies, integration, and applications.

The ability to construct multiplexed micro-systems for fluid regulation could substantially impact multiple fields, including chemistry, biology, biomedicine, tissue engineering, and soft robotics, among others. 3D printing is gaining traction as a compelling approach to fabricating microfluidic devices by providing unique capabilities, such as 1) rapid design iteration and prototyping, 2) the potential for automated manufacturing and alignment, 3) the incorporation of numerous classes of materials within a single platform, and 4) the integration of 3D microstructures with prefabricated devices, sensing arrays, and nonplanar substrates. However, to widely deploy 3D printed microfluidics at research and commercial scales, critical issues related to printing factors, device integration strategies, and incorporation of multiple functionalities require further development and optimization.

A Bionic Testbed for Cardiac Ablation Tools.

Bionic-engineered tissues have been proposed for testing the performance of cardiovascular medical devices and predicting clinical outcomes ex vivo. Progress has been made in the development of compliant electronics that are capable of monitoring treatment parameters and being coupled to engineered tissues; however, the scale of most engineered tissues is too small to accommodate the size of clinical-grade medical devices. Here, we show substantial progress toward bionic tissues for evaluating cardiac ablation tools by generating a centimeter-scale human cardiac disk and coupling it to a hydrogel-based soft-pressure sensor.

3D Printed Skin-Interfaced UV-Visible Hybrid Photodetectors.

Photodetectors that are intimately interfaced with human skin and measure real-time optical irradiance are appealing in the medical profiling of photosensitive diseases. Developing compliant devices for this purpose requires the fabrication of photodetectors with ultraviolet (UV)-enhanced broadband photoresponse and high mechanical flexibility, to ensure precise irradiance measurements across the spectral band critical to dermatological health when directly applied onto curved skin surfaces. Here, a fully 3D printed flexible UV-visible photodetector array is reported that incorporates a hybrid organic-inorganic material system and is integrated with a custom-built portable console to continuously monitor broadband irradiance in-situ.

3D-printed flexible organic light-emitting diode displays.

The ability to fully 3D-print active electronic and optoelectronic devices will enable unique device form factors via strategies untethered from conventional microfabrication facilities. Currently, the performance of 3D-printed optoelectronics can suffer from nonuniformities in the solution-deposited active layers and unstable polymer-metal junctions. Here, we demonstrate a multimodal printing methodology that results in fully 3D-printed flexible organic light-emitting diode displays.

Pregnancy and Lactation in Sprague-Dawley Rats Result in Permanent Reductions of Tibia Trabecular Bone Mineral Density and Structure but Consumption of Red Rooibos Herbal Tea Supports the Partial Recovery.

During pregnancy and lactation, maternal bone mineral density (BMD) is reduced as calcium is mobilized to support offspring bone development. In humans, BMD returns to pre-pregnancy levels shortly after delivery, shifting from a high rate of bone resorption during pregnancy and lactation, into a rapid phase of bone formation post-lactation. This rapid change in bone turnover may provide an opportunity to stimulate a greater gain in BMD and stronger trabecular and cortical structure than present pre-pregnancy.

Conduction Cooling and Plasmonic Heating Dramatically Increase Droplet Vitrification Volumes for Cell Cryopreservation.

Droplet vitrification has emerged as a promising ice-free cryopreservation approach to provide a supply chain for off-the-shelf cell products in cell therapy and regenerative medicine applications. Translation of this approach requires the use of low concentration (i.e.

The microbiome mediates epiphyseal bone loss and metabolomic changes after acute joint trauma in mice.

Objective: To compare the early responses to joint injury in conventional and germ-free mice.

Design: Post-traumatic osteoarthritis (PTOA) was induced using a non-invasive anterior cruciate ligament rupture model in 20-week old germ-free (GF) and conventional C57BL/6 mice. Injury was induced in the left knees of n = 8 GF and n = 10 conventional mice.

Black and Green Tea as Well as Specialty Teas Increase Osteoblast Mineralization with Varying Effectiveness.

Many human studies suggest a benefit of tea consumption on bone health. The study objective was to compare the ability of different tea types to promote mineralization. Saos-2 cells underwent mineralization (5 days) in the presence of tea (white: WT, green: GT, black: BT, green rooibos: GR, or red rooibos: RR; 1 μg/mL of polyphenols) or control.

3D printed self-supporting elastomeric structures for multifunctional microfluidics.

Microfluidic devices fabricated via soft lithography have demonstrated compelling applications such as lab-on-a-chip diagnostics, DNA microarrays, and cell-based assays. These technologies could be further developed by directly integrating microfluidics with electronic sensors and curvilinear substrates as well as improved automation for higher throughput. Current additive manufacturing methods, such as stereolithography and multi-jet printing, tend to contaminate substrates with uncured resins or supporting materials during printing.

3D printed patient-specific aortic root models with internal sensors for minimally invasive applications.

Minimally invasive surgeries have numerous advantages, yet complications may arise from limited knowledge about the anatomical site targeted for the delivery of therapy. Transcatheter aortic valve replacement (TAVR) is a minimally invasive procedure for treating aortic stenosis. Here, we demonstrate multimaterial three-dimensional printing of patient-specific soft aortic root models with internally integrated electronic sensor arrays that can augment testing for TAVR preprocedural planning.

3D printed deformable sensors.

The ability to directly print compliant biomedical devices on live human organs could benefit patient monitoring and wound treatment, which requires the 3D printer to adapt to the various deformations of the biological surface. We developed an in situ 3D printing system that estimates the motion and deformation of the target surface to adapt the toolpath in real time. With this printing system, a hydrogel-based sensor was printed on a porcine lung under respiration-induced deformation.

In Situ Expansion, Differentiation, and Electromechanical Coupling of Human Cardiac Muscle in a 3D Bioprinted, Chambered Organoid.

Rationale: One goal of cardiac tissue engineering is the generation of a living, human pump in vitro that could replace animal models and eventually serve as an in vivo therapeutic. Models that replicate the geometrically complex structure of the heart, harboring chambers and large vessels with soft biomaterials, can be achieved using 3-dimensional bioprinting. Yet, inclusion of contiguous, living muscle to support pump function has not been achieved.

Black Tea Exhibits a Dose-Dependent Response in Saos-2 Cell Mineralization.

Higher bone mineral density (BMD) is often associated with greater consumption of black tea (BT). However, the dose-response of BT on mineralization in an osteoblast cell model has not yet been studied. The study objective was to determine the dose-dependent response of BT in Saos-2 cells and investigate changes to several proteins involved in the mineralization process.

3D Printed Neural Regeneration Devices.

Neural regeneration devices interface with the nervous system and can provide flexibility in material choice, implantation without the need for additional surgeries, and the ability to serve as guides augmented with physical, biological (e.g., cellular), and biochemical functionalities.

A Review of 30 Years of Alveolar Bone Grafting in the Mixed Dentition Using a Standardized Protocol in Western Australia.

Background: Outcomes for a continuously applied alveolar bone grafting protocol, established in 1982, are reported and compared to previously published outcomes from the authors' unit and elsewhere.

Methods: A descriptive, retrospective cohort study of alveolar bone grafting outcomes at a tertiary referral cleft center was performed. Records of all alveolar bone grafts between 2002 and 2014 were reviewed (224 grafts).

Corrigendum to "3D printed bionic nanodevices" [Nano Today 11 (2016) 330-350].

[This corrects the article PMC5016035.].

3D Bioprinted In Vitro Metastatic Models via Reconstruction of Tumor Microenvironments.

The development of 3D in vitro models capable of recapitulating native tumor microenvironments could improve the translatability of potential anticancer drugs and treatments. Here, 3D bioprinting techniques are used to build tumor constructs via precise placement of living cells, functional biomaterials, and programmable release capsules. This enables the spatiotemporal control of signaling molecular gradients, thereby dynamically modulating cellular behaviors at a local level.

The gut microbiome is required for full protection against acute arsenic toxicity in mouse models.

Arsenic poisons an estimated 200 million people worldwide through contaminated food and drinking water. Confusingly, the gut microbiome has been suggested to both mitigate and exacerbate arsenic toxicity. Here, we show that the microbiome protects mice from arsenic-induced mortality.

3D Printed Stem-Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds.

A bioengineered spinal cord is fabricated via extrusion-based multi-material 3D bioprinting, in which clusters of induced pluripotent stem cell (iPSC)-derived spinal neuronal progenitor cells (sNPCs) and oligodendrocyte progenitor cells (OPCs) are placed in precise positions within 3D printed biocompatible scaffolds during assembly. The location of a cluster of cells, of a single type or multiple types, is controlled using a point-dispensing printing method with a 200 μm center-to-center spacing within 150 μm wide channels. The bioprinted sNPCs differentiate and extend axons throughout microscale scaffold channels, and the activity of these neuronal networks is confirmed by physiological spontaneous calcium flux studies.