Structure-Based Design of Dual Bactericidal and Bacteria-Releasing Nanosurfaces.

Here, we report synergistic nanostructured surfaces combining bactericidal and bacteria-releasing properties. A polystyrene--poly(methyl methacrylate) (PS--PMMA) diblock copolymer is used to fabricate vertically oriented cylindrical PS structures ("PS nanopillars") on silicon substrates. The results demonstrate that the PS nanopillars (with a height of about 10 nm, size of about 50 nm, and spacing of about 70 nm) exhibit highly effective bactericidal and bacteria-releasing properties ("dual properties") against for at least 36 h of immersion in an solution.

Collective Nanoparticle Dynamics Associated with Bridging Network Formation in Model Polymer Nanocomposites.

The addition of nanoparticles (NPs) to polymers is a powerful method to improve the mechanical and other properties of macromolecular materials. Such hybrid polymer-particle systems are also rich in fundamental soft matter physics. Among several factors contributing to mechanical reinforcement, a polymer-mediated NP network is considered to be the most important in polymer nanocomposites (PNCs).

Protein Resistance Driven by Polymer Nanoarchitecture.

We report that the nanometer-scale architecture of polymer chains plays a crucial role in its protein resistant property over surface chemistry. Protein-repellent (noncharged), few nanometer thick polymer layers were designed with homopolymer chains physisorbed on solids. We evaluated the antifouling property of the hydrophilic or hydrophobic adsorbed homopolymer chains against bovine serum albumin in water.

Self-Organization of Triblock Copolymer Melt Chains Physisorbed on Non-neutral Surfaces.

We here report the self-organization process of poly(styrene--ethylene/butadiene--styrene) (SEBS) triblock copolymer chains physically adsorbed on a non-neutral surface. Spin-cast SEBS thin films were prepared on silicon (Si) substrates and then annealed at a high temperature far above the bulk glass transition temperatures of the two constituent blocks. To reveal the buried interfacial structure, we utilized solvent rinsing processes and a suite of surface-sensitive techniques including ellipsometry, X-ray reflectivity, atomic force microscopy, and grazing incidence small angle X-ray scattering.

Thermal Properties and Segmental Dynamics of Polymer Melt Chains Adsorbed on Solid Surfaces.

The glass transition of supported polystyrene (PS) and poly(2-vinylpyridine) (P2VP) thin films in the vicinity of the substrate interface was studied by using a nanoplasmonic sensing (NPS) method. This "nanocalorimetric" approach utilizes localized surface plasmon resonance from two-dimensional arrangements of sensor nanoparticles deposited on SiO-coated glass substrates. The NPS results demonstrated the existence of a high glass transition temperature ( T) along with the bulk glass transition temperature ( T ≈ 100 °C for PS and P2VP) within the thin films: T ≈ 160 °C for PS and T ≈ 200 °C for P2VP.

Structure-induced switching of interpolymer adhesion at a solid-polymer melt interface.

Here we report a link between the interfacial structure and adhesive property of homopolymer chains physically adsorbed (i.e., via physisorption) onto solids.

Novel Effects of Compressed CO Molecules on Structural Ordering and Charge Transport in Conjugated Poly(3-hexylthiophene) Thin Films.

We report the effects of compressed CO molecules as a novel plasticization agent for poly(3-hexylthiophene) (P3HT)-conjugated polymer thin films. In situ neutron reflectivity experiments demonstrated the excess sorption of CO molecules in the P3HT thin films (about 40 nm in thickness) at low pressure (P = 8.2 MPa) under the isothermal condition of T = 36 °C, which is far below the polymer bulk melting point.

Flattening Process of Polymer Chains Irreversibly Adsorbed on a Solid.

We report the structural relaxation process of irreversibly adsorbed polymer chains via thermal annealing that lie flat on a solid ("flattened chains"). Amorphous polystyrene and quartz, which together constitute a weakly attractive system, was used as a model where the local chain conformations of the flattened chains were investigated by sum frequency generation spectroscopy (SFG). Two different film preparation processes (i.

Nanoscale adsorbed structures as a robust approach for tailoring polymer film stability.

The stability or wettability of thin polymer films on solids is of vital interest in traditional technologies as well as in new emerging nanotechnologies. We report here that nanoscale structures of polymer chains adsorbed onto a solid surface play a crucial role in the thermal stability of the film. In this study, polystyrene (PS) spin-cast films (20 nm in thickness) with eight different molecular weights prepared on silicon (Si) substrates were used as a model.

Nanostructures and Dynamics of Macromolecules Bound to Attractive Filler Surfaces.

We report in situ nanostructures and dynamics of polybutadiene (PB) chains bound to carbon black (CB) fillers (the so-called "bound polymer layer (BPL)") in a good solvent. The BPL on the CB fillers was extracted by solvent leaching of a CB-filled PB compound and subsequently dispersed in deuterated toluene to label the BPL for small-angle neutron scattering and neutron spin echo techniques. The results demonstrate that the BPL is composed of two regions regardless of molecular weights of PB: the inner unswollen region of ≈ 0.

Pathways of cylindrical orientations in PS-b-P4VP diblock copolymer thin films upon solvent vapor annealing.

The orientation changes of perpendicular cylindrical microdomains in polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) thin films upon annealing in different solvent vapors were investigated by in situ grazing incidence small-angle X-ray scattering (GISAXS) and ex situ scanning force microscopy (SFM). The swelling of P4VP perpendicular cylinders (C⊥) in chloroform, a non-selective solvent vapor, leads to the reorientation to in-plane cylinders through a disordered state in a particular kinetic pathway in the phase diagram upon drying. On the other hand, the swelling of the P4VP perpendicular cylinders in a selective solvent vapor (i.

Hydrate formation at the methane/water interface on the molecular scale.

We report the nucleation process of methane hydrate on the molecular scale. A stationary planar interface separating methane gas and liquid water was studied by using in situ neutron reflectivity. We found that the angstrom-scale surface roughening is triggered as soon as the water phase contacts methane gas under the hydrate forming conditions.

Shear small-angle light scattering studies of shear-induced concentration fluctuations and steady state viscoelastic properties.

We aimed at elucidating the influence of shear-induced structures (shear-enhanced concentration fluctuations and/or shear-induced phase separation), as observed by rheo-optical methods with small-angle light scattering under shear flow (shear-SALS) and shear-microscopy, on viscoelastic properties in semidilute polystyrene (PS) solutions of 6.0 wt % concentration using dioctyl phthalate (DOP) as a Theta solvent and tricresyl phosphate (TCP) as a good solvent. In order to quantify the effects of the shear-induced structures, we conducted a numerical analysis of rheological properties in a homogeneous solution based on the constitutive equation developed by Kaye-Bernstein, Kearsley, and Zapas (K-BKZ).