Differential phase contrast from electrons that cause inner shell ionization.

Differential Phase Contrast (DPC) imaging, in which deviations in the bright field beam are in proportion to the electric field, has been extensively studied in the context of pure elastic scattering. Here we discuss differential phase contrast formed from core-loss scattered electrons, i.e.

Ultrastrong nanotwinned titanium alloys through additive manufacturing.

Titanium alloys, widely used in the aerospace, automotive and energy sectors, require complex casting and thermomechanical processing to achieve the high strengths required for load-bearing applications. Here we reveal that additive manufacturing can exploit thermal cycling and rapid solidification to create ultrastrong and thermally stable titanium alloys, which may be directly implemented in service. As demonstrated in a commercial titanium alloy, after simple post-heat treatment, adequate elongation and tensile strengths over 1,600 MPa are achieved.

Chemical Fingerprinting of Polymers Using Electron Energy-Loss Spectroscopy.

Electron energy-loss spectroscopy (EELS) is becoming an important tool in the characterization of polymeric materials. The sensitivity of EELS to changes in the chemical structure of polymeric materials dictates its applicability. In particular, it is important for compositional analysis to have reference spectra of pure components.

High Performance Lithium-Ion Batteries Using Layered 2H-MoTe as Anode.

The major challenges faced by candidate electrode materials in lithium-ion batteries (LIBs) include their low electronic and ionic conductivities. 2D van der Waals materials with good electronic conductivity and weak interlayer interaction have been intensively studied in the electrochemical processes involving ion migrations. In particular, molybdenum ditelluride (MoTe ) has emerged as a new material for energy storage applications.

Superior polarization retention through engineered domain wall pinning.

Ferroelectric materials possess a spontaneous polarization that is switchable by an electric field. Robust retention of switched polarization is critical for non-volatile nanoelectronic devices based on ferroelectrics, however, these materials often suffer from polarization relaxation, typically within days to a few weeks. Here we exploit designer-defect-engineered epitaxial BiFeO films to demonstrate polarization retention with virtually no degradation in switched nanoscale domains for periods longer than 1 year.

Thermally Reduced Nanoporous Graphene Oxide Membrane for Desalination.

Graphene-based laminar membranes open new avenues for water treatment; in particular, reduced graphene oxide (rGO) membranes with high stability in aqueous solutions are gaining increased attention for desalination. However, the low water permeability of these membranes significantly limits their applications. In this study, the water permeability of thermally reduced GO membrane was increased by a factor of 26 times by creating in-plane nanopores with an average diameter of ∼3 nm and a high density of 2.

The evolution of size, shape, and surface morphology of gold nanorods.

We investigate the transformation of single crystal gold nanorod surface morphology over extended growth times. After initial rapid anisotropic growth and disappearance of {111} bridging facets, the aspect ratios converge across AgNO concentrations. The surface morphology transitions from faceted to curved.

Precipitation of a new platelet phase during the quenching of an Al-Zn-Mg-Cu alloy.

A previously undescribed high aspect ratio strengthening platelet phase, herein named the Y-phase, has been identified in a commercial Al-Zn-Mg-Cu alloy. Differential scanning calorimetry indicates that this phase only precipitates at temperature and cooling rate of about 150-250 °C and 0.05-300 K/s, respectively.

Microstructural characterization of an Al-li-mg-cu alloy by correlative electron tomography and atom probe tomography.

Correlative electron tomography and atom probe tomography have been carried out successfully on the same region of a commercial 8090 aluminum alloy (Al-Li-Mg-Cu). The combination of the two techniques allows accurate geometric reconstruction of the atom probe tomography data verified by crystallographic information retrieved from the reconstruction. Quantitative analysis of the precipitate phase compositions and volume fractions of each phase have been obtained from the atom probe tomography and electron tomography at various scales, showing strong agreement between both techniques.

Single-crystal caged gold nanorods with tunable broadband plasmon resonances.

We report on the synthesis and characterization of single-crystal caged gold nanorods (CGNRs) which exhibited broadband plasmonic resonances. Redshift of plasmon resonance can be realized by increasing the length, whereas blueshift can be achieved by increasing either the overall width of the cage or the thickness of nanocage walls.

Efficient atomic-scale kinetics through a complex heterophase interface.

Atomic-scale imaging and first-principles modeling are applied to the heterophase interface between the Al-Cu solid solution (αCu) and θ' (Al2Cu) phases. Contrary to recent studies, our observations reveal a diffuse interface of complex but well-defined structure that enables the progression from αCu to θ' over a distance of ≈1  nm. We demonstrate that, surprisingly, the observed interfacial structure is not preferred on energetic grounds.

Stability of Porous Platinum Nanoparticles: Combined In Situ TEM and Theoretical Study.

Porous platinum nanoparticles provide a route for the development of catalysts that use less platinum without sacrificing catalytic performance. Here, we examine porous platinum nanoparticles using a combination of in situ transmission electron microscopy and calculations based on a first-principles-parametrized thermodynamic model. Our experimental observations show that the initially irregular morphologies of the as-sythesized porous nanoparticles undergo changes at high temperatures to morphologies having faceted external surfaces with voids present in the interior of the particles.

Atom-scale ptychographic electron diffractive imaging of boron nitride cones.

Ptychographic coherent diffractive imaging (CDI) has been extensively applied using both x rays and electrons. The extension to atomic resolution has been elusive. This Letter demonstrates ptychographic electron diffractive imaging at atomic resolution, permitting identification of structure in a boron nitride helical cone at a resolution of order 1 Å, beyond that of comparative Z-contrast images.

Three-dimensional morphology and crystallography of gold nanorods.

We determine the three-dimensional shape, to within 1 nm resolution, of single-crystal gold nanorods grown in the presence of silver ions using electron tomography and thickness profile measurements. We find that, contrary to the current literature, the octagonal side-facets are sparsely packed atomic planes all belonging to the same symmetry-equivalent family, {0 5 12}. Furthermore, the rod ends terminate in a pyramid with slightly different facets, and each pyramid is connected to the sides by four small {0 5 12} "bridging" facets.

Highly anisotropic distribution of iron nanoparticles within MCM-41 Mesoporous Silica.

Electron microscopy techniques are used to visualize the spatial distribution of iron nanoparticles inside a mesoporous MCM-41 molecular sieve. Direct observation of the iron oxide nanoparticles by STEM-HAADF imaging reveals a highly non-uniform spatial distribution inside the mesopores. These particles are retained in the pores after a reduction treatment unlike the behavior found in other similar systems.

Conventional and back-side focused ion beam milling for off-axis electron holography of electrostatic potentials in transistors.

Off-axis electron holography is used to characterize a linear array of transistors, which was prepared for examination in cross-sectional geometry in the transmission electron microscope (TEM) using focused ion beam (FIB) milling from the substrate side of the semiconductor device. The measured electrostatic potential is compared with results obtained from TEM specimens prepared using the more conventional 'trench' FIB geometry. The use of carbon coating to remove specimen charging effects, which result in electrostatic fringing fields outside 'trench' specimens, is demonstrated.

Extending energy-filtered transmission electron microscopy (EFTEM) into three dimensions using electron tomography.

The length scales on which materials microstructures are being formed, grown, and even designed are becoming increasingly small and increasingly three-dimensional. For such complex structures two-dimensional transmission electron microscopy (TEM) analysis is often inadequate and occasionally misleading. One approach to this problem is the modification of electron tomography techniques, developed for structural biology, for use in materials science.