Investigating the Electromechanical Sensitivity of Carbon-Nanotube-Coated Microfibers.

The piezoresistance of carbon nanotube (CNT)-coated microfibers is examined using diametric compression. Diverse CNT forest morphologies were studied by changing the CNT length, diameter, and areal density via synthesis time and fiber surface treatment prior to CNT synthesis. Large-diameter (30-60 nm) and relatively low-density CNTs were synthesized on as-received glass fibers.

Spallation of Isolated Aluminum Nanoparticles by Rapid Photothermal Heating.

The spallation of isolated aluminum (Al) nanoparticles (NPs) is initiated using rapid photothermal heating. The Al NPs exhibited a nominal diameter of 120 nm, with an average oxide shell thickness of 3.8 nm.

Surface Plasmon Enhanced Fluorescence Temperature Mapping of Aluminum Nanoparticle Heated by Laser.

Partially aggregated Rhodamine 6G (R6G) dye is used as a lights-on temperature sensor to analyze the spatiotemporal heating of aluminum nanoparticles (Al NPs) embedded within a tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV) fluoropolymer matrix. The embedded Al NPs were photothermally heated using an IR laser, and the fluorescent intensity of the embedded dye was monitored in real time using an optical microscope. A plasmonic grating substrate enhanced the florescence intensity of the dye while increasing the optical resolution and heating rate of Al NPs.

Growth and Mechanics of Heterogeneous, 3D Carbon Nanotube Forest Microstructures Formed by Sequential Selective-Area Synthesis.

Three-dimensional carbon nanotube (CNT) forest microstructures are synthesized using sequenced, site-specific synthesis techniques. Thin-film layers of AlO and AlO/Fe are patterned to support film-catalyst and floating-catalyst chemical vapor deposition (CVD) in specific areas. AlO regions support only floating-catalyst CVD, whereas regions of layered AlO/Fe support both film- and floating-catalyst CNT growth.

Hunter-Gatherers Harvested and Heated Microbial Biogenic Iron Oxides to Produce Rock Art Pigment.

Red mineral pigment use is recognized as a fundamental component of a series of traits associated with human evolutionary development, social interaction, and behavioral complexity. Iron-enriched mineral deposits have been collected and prepared as pigment for use in rock art, personal adornment, and mortuary practices for millennia, yet little is known about early developments in mineral processing techniques in North America. Microanalysis of rock art pigments from the North American Pacific Northwest reveals a sophisticated use of iron oxide produced by the biomineralizing bacterium Leptothrix ochracea; a keystone species of chemolithotroph recognized in recent advances in the development of thermostable, colorfast biomaterial pigments.

Delamination Mechanics of Carbon Nanotube Micropillars.

The adhesion of carbon nanotube (CNT) forests to their growth substrate is a critical concern for many applications. Here, we measured the delamination force of CNT forest micropillars using in situ scanning electron microscopy (SEM) tensile testing. A flat tip with epoxy adhesive first established contact with the top surface of freestanding CNT pillars and then pulled the pillars in displacement-controlled tension until delamination was observed.

Isolating the Roles of Hydrogen Exposure and Trace Carbon Contamination on the Formation of Active Catalyst Populations for Carbon Nanotube Growth.

Limited understanding of the factors influencing the yield of carbon nanotubes (CNTs) relative to the number of catalyst particles remains an important barrier to their large-scale production with high quality, and to tailoring CNT properties for applications. This lack of understanding is evident in the frequent use of Edisonian approaches to give high-yield CNT growth, and in the sometimes-confusing influence of trace residues on the reactor walls. In order to create conditions wherein CNT yield is reproducible and to enable large-scale and reliable CNT synthesis, it is imperative to understand-fundamentally-how these common practices impact catalytic activity and thus CNT number density.

Nanoscale surface reactions by laser irradiation of Al nanoparticles on MoO flakes.

Surface reactions between heated aluminum nanoparticles (Al NPs) and thin α-MoO sheets are investigated. Localized photothermal heating on Al NP clusters is provided by a Raman spectrometer laser, while enhanced heating rates and imaging resolution are enabled by the use of a plasmonic grating substrate. Prominent linear reaction zones extending from Al NPs in the 〈001〉 crystal direction are observed on the surface of the host MoO sheets after heating.

Enhanced fluorescence for in situ temperature mapping of photothermally heated aluminum nanoparticles enabled by a plasmonic grating substrate.

In situ dynamic temperature mapping of photothermally heated aluminum nanoparticles (Al NPs) embedded in a fluoropolymer (THV) is achieved using fluorescent dye (rhodamine 6G). A plasmonic grating substrate enhances the dye fluorescence intensity by a factor of seven over a glass substrate, to enable image capture rates of 500 frames per second. Further, the fluorescence intensity is linearly related to temperature and reversible.

In Situ Characterization of Photothermal Nanoenergetic Combustion on a Plasmonic Microchip.

Plasmonic gratings facilitate a robust in situ diagnostic platform for photothermal combustion of nanoenergetic composite thin films using an optical microscope and a high-speed camera. Aluminum nanoparticles (Al NPs) embedded in a fluoropolymer oxidizer are cast onto a plasmonic grating microchip and ignited using a low-power laser. The plasmonic grating enhances both spatial resolution and sufficient photothermal coupling to combust small Al NP clusters, initiating localized flames as small as 600 nm in size.

Bioinspired Programmable Polymer Gel Controlled by Swellable Guest Medium.

Responsive materials with functions of forming three-dimensional (3D) origami and/or kirigami structures have a broad range of applications in bioelectronics, metamaterials, microrobotics, and microelectromechanical (MEMS) systems. To realize such functions, building blocks of actuating components usually possess localized inhomogeneity so that they respond differently to external stimuli. Previous fabrication strategies lie in localizing nonswellable or less-swellable guest components in their swellable host polymers to reduce swelling ability.

Precision Milling of Carbon Nanotube Forests Using Low Pressure Scanning Electron Microscopy.

A nanoscale fabrication technique appropriate for milling carbon nanotube (CNT) forests is described. The technique utilizes an environmental scanning electron microscope (ESEM) operating with a low pressure water vapor ambient. In this technique, a portion of the electron beam interacts with the water vapor in the vicinity of the CNT sample, dissociating the water molecules into hydroxyl radicals and other species by radiolysis.

Electrically Conductive Hierarchical Carbon Nanotube Networks with Tunable Mechanical Response.

Small diameter carbon nanotube (CNTs) are synthesized directly from a parent CNT forest using a floating catalyst chemical vapor deposition (CVD) method. To support a new CNT generation from an existing forest, an alumina coating was applied to the CNT forest using atomic layer deposition (ALD). The new generation of small diameter CNTs (8 nm average) surround the first generation, filling the interstitial regions.

Bioinspired carbon nanotube fuzzy fiber hair sensor for air-flow detection.

Artificial hair sensors consisting of a piezoresistive carbon-nanotube-coated glass fiber embedded in a microcapillary are assembled and characterized. Individual sensors resemble a hair plug that may be integrated in a wide range of host materials. The sensors demonstrate an air-flow detection threshold of less than 1 m/s with a piezoresistive sensitivity of 1.

Deformation response of conformally coated carbon nanotube forest.

The deformation mechanism and mechanical properties of carbon nanotube (CNT) forests conformally coated with alumina using atomic layer deposition (ALD) are investigated using in situ and ex situ micro-indentation. While micro-indentation of a CNT forest coated with a thin discontinuous layer using 20 ALD cycles results in a deformation response similar to the response of uncoated CNT forests, a similar test on a CNT forest coated with a sufficiently thick and continuous layer using 100 ALD cycles causes fracture of both the alumina coatings and the core CNTs. With a 10 nm coating, 4-fold and 14-fold stiffness increases are measured using a flat punch and a Berkovich tip, respectively.

Mechanics of capillary forming of aligned carbon nanotube assemblies.

Elastocapillary self-assembly is emerging as a versatile technique to manufacture three-dimensional (3D) microstructures and complex surface textures from arrangements of micro- and nanoscale filaments. Understanding the mechanics of capillary self-assembly is essential to engineering of properties such as shape-directed actuation, anisotropic wetting and adhesion, and mechanical energy transfer and dissipation. We study elastocapillary self-assembly (herein called "capillary forming") of carbon nanotube (CNT) microstructures, combining in situ optical imaging, micromechanical testing, and finite element modeling.

In situ SEM observation of column-like and foam-like CNT array nanoindentation.

Quantitative nanoindentation of nominally 7.5 and 600 μm tall vertically aligned carbon nanotube (VACNT) arrays is observed in situ within an SEM chamber. The 7.

Assemblies of carbon nanotubes and unencapsulated sub-10-nm gold nanoparticles.

The development of assemblies consisting of unencapsulated, sub-10-nm gold particles attached to individual carbon nanotubes (CNTs) with diameters of 2 nm is described. The assemblies are formed on the surface of a porous anodic alumina (PAA) template on which the CNTs (single- or double-walled) are grown by plasma-enhanced chemical vapor deposition. The Au nanoparticles are formed through an indirect evaporation technique using a silicon nitride membrane mask, and diffuse along the PAA surface into the regions containing CNTs.

Lithography-free in situ Pd contacts to templated single-walled carbon nanotubes.

We report a metalization technique for electrically addressing templated vertical single-walled carbon nanotubes (SWNTs) using in situ palladium (Pd) nanowires. SWNTs are synthesized from an embedded catalyst in a modified porous anodic alumina (PAA) template. Pd is electrodeposited into the template to form nanowires that grow from an underlying conductive layer beneath the PAA and extend to the initiation sites of the SWNTs within each pore.

Dendrimer-assisted low-temperature growth of carbon nanotubes by plasma-enhanced chemical vapor deposition.

Using a shielded growth approach and N2-annealed, nearly monodispersed Fe2O3 nanoparticles synthesized by interdendritic stabilization of Fe3+ species within fourth-generation poly(amidoamine) dendrimers, carbon nanotubes and nanofibers were successfully grown at low substrate temperatures (200-400 degrees C) by microwave plasma-enhanced chemical vapor deposition.

Dendrimer-templated Fe nanoparticles for the growth of single-wall carbon nanotubes by plasma-enhanced CVD.

A fourth-generation (G4) poly(amidoamine) (PAMAM) dendrimer (G4-NH2) has been used as a template to deliver nearly monodispersed catalyst nanoparticles to SiO2/Si, Ti/Si, sapphire, and porous anodic alumina (PAA) substrates. Fe2O3 nanoparticles obtained after calcination of the immobilized Fe3+/G4-NH2 composite served as catalytic "seeds" for the growth of single-wall carbon nanotubes (SWNTs) by microwave plasma-enhanced CVD (PECVD). To surmount the difficulty associated with SWNT growth via PECVD, reaction conditions that promote the stabilization of Fe nanoparticles, resulting in enhanced SWNT selectivity and quality, have been identified.