Characterizing the Impact of Spray Dried Particle Morphology on Tablet Dissolution Using Quantitative X-Ray Microscopy.

For oral solid dosage forms, disintegration and dissolution properties are closely related to the powders and particles used in their formulation. However, there remains a strong need to characterize the impact of particle structures on tablet compaction and performance. Three-dimensional non-invasive tomographic imaging plays an increasingly essential role in the characterization of drug substances, drug product intermediates, and drug products.

High-performance thin-layer chromatography plate blotting for liquid microjunction surface sampling probe mass spectrometric analysis of analytes separated on a wettable phase plate.

A blotting method that transfers analytes separated on wettable high-performance thin-layer chromatography (HPTLC) plates to a hydrophobic reversed-phase C8 HPLTC plate suitable for analysis with a liquid microjunction surface sampling probe electrospray ionization mass spectrometry system was described and demonstrated. The simple blotting procedure transfers the analyte from the wettable plate to the topmost surface of a rigidly backed, easy-to-mount hydrophobic substrate that already has been proven viable for analysis by this sampling probe/mass spectrometry system. The utility of the approach was demonstrated by the analysis of a four-component peptide mixture originally separated on a ProteoChrom® HPTLC cellulose sheet and then blotted onto the reversed-phase HPTLC plate.

Direct sampling and analysis from solid-phase extraction cards using an automated liquid extraction surface analysis nanoelectrospray mass spectrometry system.

Direct liquid extraction based surface sampling, a technique previously demonstrated with continuous flow and autonomous pipette liquid microjunction surface sampling probes, has recently been implemented as a liquid extraction surface analysis (LESA) mode on a commercially available chip-based infusion nanoelectrospray ionization (nanoESI) system. In the present paper, the LESA mode was applied to the analysis of 96-well format custom-made solid-phase extraction (SPE) cards, with each well consisting of either a 1 or a 2 mm diameter monolithic hydrophobic stationary phase. These substrate wells were conditioned, loaded with either single or multi-component aqueous mixtures, and read out using the commercial nanoESI system coupled to a hybrid triple quadrupole/linear ion trap mass spectrometer or a linear ion trap mass spectrometer.

Hydrophobic treatment enabling analysis of wettable surfaces using a liquid microjunction surface sampling probe/electrospray ionization-mass spectrometry system.

An aerosol application procedure involving one or more commercially available silicone-based products was developed to create hydrophobic surfaces that enable analysis of otherwise wettable, absorbent surfaces using a liquid microjunction surface sampling probe/electrospray ionization mass spectrometry system. The treatment process resulted in a hydrophobic surface that enabled formation of the requisite probe-to-surface liquid microjunction for sampling and allowed efficient extraction of the analytes from the surface, but did not contribute significant chemical background in the mass spectra. The utility of this treatment process was demonstrated with the treatment of wettable high-performance thin layer chromatography plates, post-plate development, and their subsequent analysis with the sampling probe.

Correlation between peak capacity and protein sequence coverage in proteomics analysis by liquid chromatography-mass spectrometry/mass spectrometry.

Liquid chromatography-mass spectrometry/mass spectrometry (LC-MS/MS) allows the acquisition of a vast amount of analytical data in the aim of identifying peptides and proteins. Difficulties arise when attempting to identify proteins from the results of analyses of their peptide digests. We investigated possible quantitative correlations between the peak capacity achieved in chromatographic analyses and the protein sequence coverage.

Direct analysis of reversed-phase high-performance thin layer chromatography separated tryptic protein digests using a liquid microjunction surface sampling probe/electrospray ionization mass spectrometry system.

The sampling, ionization and detection of tryptic peptides separated in one-dimension on reversed-phase high-performance thin layer chromatography (HPTLC) plates was performed using liquid microjunction surface sampling probe electrospray ionization mass spectrometry. Tryptic digests of five proteins [cytochrome c, myoglobin, beta-casein, lysozyme and bovine serum albumin (BSA)] were spotted on reversed phase HPTLC RP-8 F254s and HPTLC RP-18 F254s plates. The plates were then developed using 70/30 methanol/water with 0.

Extraction, separation, and fluorometric analysis of selected environmental contaminants.

Teratogenic, carcinogenic, and pervasive endocrine disrupting compounds (EDCs) in suspect water systems present an immediate threat to both the environment and potable water supplies. The US Environmental Protection Agency mandated research regarding suspect EDCs, personal care products, and pesticide pollution requires the use of suitable methods of analysis that can perform extraordinarily well in the field and show low "cost to benefit" ratios. Such methods must increasingly address the need for enhanced sensitivity and selectivity in interrogating complex mixtures.

Dual function surface-enhanced Raman active extractor for the detection of environmental contaminants.

Surface-enhanced Raman spectroscopy (SERS) has lagged behind other analytical techniques utilized in routine chemical analyses despite the information-rich spectra produced. This can be attributed in part to the difficulties in finding effective substrates that provide high sensitivity and highly reproducible SERS responses. Herein, we have developed a silver-coated polypropylene filter (AgPPF) as a highly sensitive and promising SERS substrate for the detection of environmentally significant chemicals, including selected pharmaceuticals, personal care products, and possible endocrine disruptors.