Extreme Monovalent Ion Selectivity Via Capacitive Ion Exchange.

Capacitive deionization (CDI) is an emerging technology applied to brackish water desalination and ion selective separations. A typical CDI cell consists of two microporous carbon electrodes, where ions are stored in charged micropore via electrosorption into electric double layers. For typical feed waters containing mixtures of several cations and anions, some of which are polluting, models are needed to guide cell design for a target separation, given the complex electrosorption dynamics of each species.

Resistance Breakdown of a Membraneless Hydrogen-Bromine Redox Flow Battery.

A key bottleneck to society's transition to renewable energy is the lack of cost-effective energy storage systems. Hydrogen-bromine redox flow batteries are seen as a promising solution, due to the use of low-cost reactants and highly conductive electrolytes, but market penetration is prevented due to high capital costs, for example due to costly membranes to prevent bromine crossover. Membraneless hydrogen-bromine cells relying on colaminar flows have thus been investigated, showing high power density nearing 1 W/cm.

Electrochemical Methods for Water Purification, Ion Separations, and Energy Conversion.

Agricultural development, extensive industrialization, and rapid growth of the global population have inadvertently been accompanied by environmental pollution. Water pollution is exacerbated by the decreasing ability of traditional treatment methods to comply with tightening environmental standards. This review provides a comprehensive description of the principles and applications of electrochemical methods for water purification, ion separations, and energy conversion.

Desalination Fuel Cells with High Thermodynamic Energy Efficiency.

Sustainably-produced hydrogen is currently intensively investigated as an energy carrier to replace fossil fuels. We here characterize an emerging electrochemical cell termed a desalination fuel cell (DFC) that can continuously generate electricity and desalinate water while using hydrogen and oxygen gases as inputs. We investigated two operational modes, a near-neutral pH operation with H, O, and feedwater inputs (H|O), and a pH-gradient mode with H, O, feedwater, acid, and base inputs (H + B|O + A).

Perfect divalent cation selectivity with capacitive deionization.

Capacitive deionization (CDI) is an emerging membraneless water desalination technology based on storing ions in charged electrodes by electrosorption. Due to unique selectivity mechanisms, CDI has been investigated towards ion-selective separations such as water softening, nutrient recovery, and production of irrigation water. Especially promising is the use of activated microporous carbon electrodes due to their low cost and wide availability at commercial scales.

Electrochemical removal of amphoteric ions.

Several harmful or valuable ionic species present in seawater, brackish water, and wastewater are amphoteric, weak acids or weak bases, and, thus, their properties depend on local water pH. Effective removal of these species can be challenging for conventional membrane technologies, necessitating chemical dosing of the feedwater to adjust pH. A prominent example is boron, which is considered toxic in high concentrations and often requires additional membrane passes to remove during seawater desalination.

Flow-electrode capacitive deionization: A review and new perspectives.

Flow-electrode capacitive deionization (FCDI), as a novel electro-driven desalination technology, has attracted growing exploration towards brackish water treatment, hypersaline water treatment, and selective resource recovery in recent years. As a flow-electrode-based electrochemical technology, FCDI has similarities with several other electrochemical technologies such as electrochemical flow capacitors and semi-solid fuel cells, whose performance are closely coupled with the characteristics of the flow-electrodes. In this review, we sort out the potentially parallel mechanisms of electrosorption and electrodialysis in the FCDI desalination process, and make clear the importance of the flowable capacitive electrodes.

A Single-Flow Battery with Multiphase Flow.

Widespread adoption of redox flow batteries (RFBs) for renewable energy storage is inhibited by a relatively high cost of storage. This is due largely to typical RFBs requiring two flows, two external tanks, and expensive ion-exchange membranes. Here, we propose a potentially inexpensive Zn-Br RFB which is membraneless and requires only a single flow.

Carbon Black Flow Electrode Enhanced Electrochemical Desalination Using Single-Cycle Operation.

Flow-electrode electrochemical desalination (FEED) processes (e.g., flow-electrode capacitive deionization), which use flowable carbon particles as the electrodes, have attracted increasing attention, holding the promise for continuous desalination and high desalting efficiency.

Enhancing the Ion-Size-Based Selectivity of Capacitive Deionization Electrodes.

Capacitive deionization (CDI) is an emerging water treatment technology often applied to brackish water desalination and water softening. Typical CDI cells consist of two microporous carbon electrodes sandwiching a dielectric separator, and desalt feedwater flowing through the cell by storing ions in electric double layers (EDLs) within charged micropores. CDI cells have demonstrated size-based ion selectivity wherein smaller hydrated ions are preferentially electrosorbed over larger hydrated ions.

Performance metrics for the objective assessment of capacitive deionization systems.

In the growing field of capacitive deionization (CDI), a number of performance metrics have emerged to describe the desalination process. Unfortunately, the separation conditions under which these metrics are measured are often not specified, resulting in optimal performance at minimal removal. Here we outline a system of performance metrics and reporting conditions that resolves this issue.

Percolation probability in a system of cylindrical particles.

A broad variety of materials, ranging from composites and heat transfer nano-fluids to electrochemical energy storage electrodes, widely employ cylindrical particles of various aspect ratios, such as carbon nanotubes. These particles are generally excellent conductors of heat and electricity and when dispersed in a continuous medium influence dramatically the transport properties of the heterogeneous material by forming a percolating network. Numerous theories exist to predict key parameters such as particle concentration at the percolation threshold and transport properties at concentrations beyond the threshold.

The effect of surface transport on water desalination by porous electrodes undergoing capacitive charging.

Capacitive deionization (CDI) is a technology in which water is desalinated by ion electrosorption into the electric double layers (EDLs) of charging porous electrodes. In recent years significant advances have been made in modeling the charge and salt dynamics in a CDI cell, but the possible effect of surface transport within diffuse EDLs on these dynamics has not been investigated. We here present theory which includes surface transport in describing the dynamics of a charging CDI cell.

Porosimetry and packing morphology of vertically aligned carbon nanotube arrays via impedance spectroscopy.

Vertically aligned one-dimensional nanostructure arrays are promising in many applications such as electrochemical systems, solar cells, and electronics, taking advantage of high surface area per unit volume, nanometer length scale packing, and alignment leading to high conductivity. However, many devices need to optimize arrays for device performance by selecting an appropriate morphology. Developing a simple, non-invasive tool for understanding the role of pore volume distribution and interspacing would aid in the optimization of nanostructure morphologies in electrodes.

Suspension Electrodes Combining Slurries and Upflow Fluidized Beds.

Carbon-based suspension electrodes are currently intensively investigated for emerging electrochemical systems, such as flow batteries, flow capacitors, and capacitive deionization cells. The main limitation of such electrodes is their low electric conductivity, which is typically orders of magnitude lower than that of traditional static carbon electrodes. Two main categories of suspension electrodes exist: 1) slurry electrodes where particles are not significantly affected by gravity, and 2) fluidized bed electrodes where particles are affected by gravity.

In situ spatially and temporally resolved measurements of salt concentration between charging porous electrodes for desalination by capacitive deionization.

Capacitive deionization (CDI) is an emerging water desalination technique. In CDI, pairs of porous electrode capacitors are electrically charged to remove salt from brackish water present between the electrodes. We here present a novel experimental technique allowing measurement of spatially and temporally resolved salt concentration between the CDI electrodes.

Mechanically robust 3D graphene macroassembly with high surface area.

We report the synthesis of a three-dimensional (3D) macroassembly of graphene sheets with electrical conductivity (∼10(2) S m(-1)) and Young's modulus (∼50 MPa) orders of magnitude higher than those previously reported, super-compressive deformation behavior (∼60% failure strain), and surface areas (>1300 m(2) g(-1)) approaching theoretically maximum values.

Electroosmotic pump performance is affected by concentration polarizations of both electrodes and pump.

Current methods of optimizing electroosmotic (EO) pump performance include reducing pore diameter and reducing ionic strength of the pumped electrolyte. However, these approaches each increase the fraction of total ionic current carried by diffuse electric double layer (EDL) counterions. When this fraction becomes significant, concentration polarization (CP) effects become important, and traditional EO pump models are no longer valid.

Basic principles of electrolyte chemistry for microfluidic electrokinetics. Part II: Coupling between ion mobility, electrolysis, and acid-base equilibria.

We present elements of electrolyte dynamics and electrochemistry relevant to microfluidic electrokinetics experiments. In Part I of this two-paper series, we presented a review and introduction to the fundamentals of acid-base chemistry. Here, we first summarize the coupling between acid-base equilibrium chemistry and electrophoretic mobilities of electrolytes, at both infinite and finite dilution.