Pre-Clinical Assessment of Bupivacaine-Loaded Poly(ester urea) Thin Films for Controlled Drug Release and Effective Pain Management After Surgery.

Safe, effective pain management remains one of the biggest challenges following surgical procedures. Despite widespread recognition of this problem and advances in the mechanistic understanding of pain signaling, post-surgical pain is often undermanaged, with opioid use remaining the clinical standard. As an alternative to current oral, systemic treatments, a degradable bupivacaine-loaded poly(ester urea) (PEU) thin film has been developed to deliver bupivacaine directly to the site of injury over an extended duration.

Spatial Risk Effects From Lions Compound Impacts of Prey Depletion on African Wild Dogs.

Prey depletion threatens many carnivore species across the world and can especially threaten low-density subordinate competitors, particularly if subordinates are limited to low densities by their dominant competitors. Understanding the mechanisms that drive responses of carnivore density to prey depletion is not only crucial for conservation but also elucidates the balance between top-down and bottom-up limitations within the large carnivore guild. To avoid predation, competitively subordinate African wild dogs typically avoid their dominant competitors (lions) and the prey rich areas they are associated with, but no prior research has tested whether this pattern persists in ecosystems with anthropogenically-reduced prey density, and reduced lion density as a result.

Amino Acid-Based Poly(ester urea) Biodegradable Membrane for Guided Bone Regeneration.

Barrier membranes (BM) for guided bone regeneration (GBR) aim to support the osteogenic healing process of a defined bony defect by excluding epithelial (gingival) ingrowth and enabling osteoprogenitor and stem cells to proliferate and differentiate into bone tissue. Currently, the most widely used membranes for these approaches are collagen-derived, and there is a discrepancy in defining the optimal collagen membrane in terms of biocompatibility, strength, and degradation rates. Motivated by these clinical observations, we designed a collagen-free membrane based on l-valine--l-phenylalanine-poly(ester urea) (PEU) copolymer via electrospinning.

Engineering of heterobifunctional biopolymers for tunable binding and precipitation of Strep-Tag proteins and virus-like nanoparticles.

Affinity precipitation is a powerful separation method in that it combines the binding selectivity of affinity chromatography with precipitation of captured biomolecules via phase separation triggered by small changes in the environment, e.g., pH, ionic strength, temperature, light, etc.

Platelet-rich plasma enhances rib fracture strength and callus formation in vivo.

Background: Rib fractures are a common traumatic injury affecting more than 350,000 patients a year. Early stabilization has shown to be effective in reducing pulmonary complications. Platelet-rich plasma (PRP) is a growth factor-rich blood product known to improve soft tissue and bone healing.

Synthesis and Solvent Free DLP 3D Printing of Degradable Poly(Allyl Glycidyl Ether Succinate).

Digital light processing (DLP) printing forms solid constructs from fluidic resins by photochemically crosslinking polymeric resins with reactive functional groups. DLP is used widely due to its efficient, high-resolution printing, but its use and translational potential has been limited in some applications as state-of-the-art resins experience unpredictable and anisotropic part shrinkage due to the use of solvent needed to reduce resin viscosity and layer dependent crosslinking. Herein, poly(allyl glycidyl ether succinate) (PAGES), a low viscosity, degradable polyester, was synthesized by ring opening copolymerization and used in combination with degradable thiol crosslinkers to afford a solvent free resin that can be utilized in DLP printing.

Controlled Transdermal Delivery of Dexamethasone for Pain Management via Photochemically 3D-Printed Bioresorbable Microneedle Arrays.

Microneedle array patches (MAPs) are extensively studied for transdermal drug delivery. Additive manufacturing enables precise control over MAP customization and rapid fabrication. However, the scope of 3D-printable, bioresorbable materials is limited.

Erratum: Three-Year Results of the GORE VIABAHN Endoprosthesis in the Superficial Femoral Artery for In-Stent Restenosis.

[This corrects the article DOI: 10.1016/j.jscai.

Long-term data reveal fitness costs of anthropogenic prey depletion for a subordinate competitor, the African wild dog ().

Within carnivore guilds, dominant competitors (e.g., lions, ) are limited primarily by the density of prey, while subordinate competitors (e.

Digital Light Processing to Afford High Resolution and Degradable CO-Derived Copolymer Elastomers.

Vat photopolymerization 3D printing has proven very successful for the rapid additive manufacturing (AM) of polymeric parts at high resolution. However, the range of materials that can be printed and their resulting properties remains narrow. Herein, we report the successful AM of a series of poly(carbonate-b-ester-b-carbonate) elastomers, derived from carbon dioxide and bio-derived ϵ-decalactone.

Microfluidic Assembly of Degradable, Stereocomplexed Hydrogel Microparticles.

Hydrogel microparticles (HMPs) have been investigated widely for their use in tissue engineering and drug delivery applications. However, translation of these highly tunable systems has been hindered by covalent cross-linking methods within microparticles. Stereocomplexation, a stereospecific form of physical cross-linking, provides a robust yet degradable alternative for creating translationally relevant HMPs.

Feasibility and Acceptability of a Mobile App-Based TEAM-CBT (Testing Empathy Assessment Methods-Cognitive Behavioral Therapy) Intervention (Feeling Good) for Depression: Secondary Data Analysis.

Background: The Feeling Good App is an automated stand-alone digital mobile mental health tool currently undergoing beta testing with the goal of providing evidence-informed self-help lessons and exercises to help individuals reduce depressive symptoms without guidance from a mental health provider. Users work through intensive basic training (IBT) and ongoing training models that provide education regarding cognitive behavioral therapy principles from a smartphone.

Objective: The key objective of this study was to perform a nonsponsored third-party academic assessment of an industry-generated data set; this data set focused on the safety, feasibility, and accessibility of a commercial automated digital mobile mental health app that was developed to reduce feelings associated with depression.

Serum from pregnant donors induces human beta cell proliferation.

Pancreatic beta cells are among the slowest replicating cells in the human body and have not been observed to increase in number except during the fetal and neonatal period, in cases of obesity, during puberty, as well as during pregnancy. Pregnancy is associated with increased beta cell mass to meet heightened insulin demands. This phenomenon raises the intriguing possibility that factors present in the serum of pregnant individuals may stimulate beta cell proliferation and offer insights into expansion of the beta cell mass for treatment and prevention of diabetes.

Vulture poisoning in Sub-Saharan Africa and its implications for conservation planning: A systematic review.

The Old World Vultures (OWV), constituting 16 species primarily in Africa, Europe and Asia, are currently being driven to extinction mostly by anthropogenic activities, especially poisoning. The vulture losses from poisoning caused by human-related activities are at a single mortality event-level and occur in complex social-ecological systems. There has been a growing body of knowledge on wildlife poisoning over the years.

An integrated population model reveals source-sink dynamics for competitively subordinate African wild dogs linked to anthropogenic prey depletion.

Many African large carnivore populations are declining due to decline of the herbivore populations on which they depend. The densities of apex carnivores like the lion and spotted hyena correlate strongly with prey density, but competitively subordinate carnivores like the African wild dog benefit from competitive release when the density of apex carnivores is low, so the expected effect of a simultaneous decrease in resources and dominant competitors is not obvious. Wild dogs in Zambia's South Luangwa Valley Ecosystem occupy four ecologically similar areas with well-described differences in the densities of prey and dominant competitors due to spatial variation in illegal offtake.

Factors affecting product association as a mechanism of host-cell protein persistence in bioprocessing.

Product association of host-cell proteins (HCPs) to monoclonal antibodies (mAbs) is widely regarded as a mechanism that can enable HCP persistence through multiple purification steps and even into the final drug substance. Discussion of this mechanism often implies that the existence or extent of persistence is directly related to the strength of binding but actual measurements of the binding affinity of such interactions remain sparse. Two separate avenues of investigation of HCP-mAb binding are reported here.

Application of surface-layer matrix-assisted laser desorption/ionization mass spectrometry imaging to pharmaceutical-loaded poly(ester urea) films.

Polymer thin films are often used in transdermal patches as a method of continuous drug administration for patients with chronic illness. Understanding the drug segregation and distribution within these films is important for monitoring proper drug release over time. Surface-layer matrix-assisted laser desorption/ionization mass spectrometry imaging (SL-MALDI-MSI) is a unique analytical technique that provides an optical representation of chemical compositions that exist at the surface of polymeric materials.

Resorbable barrier polymers for flexible bioelectronics.

Resorbable, implantable bioelectronic devices are emerging as powerful tools to reliably monitor critical physiological parameters in real time over extended periods. While degradable magnesium-based electronics have pioneered this effort, relatively short functional lifetimes have slowed clinical translation. Barrier films that are both flexible and resorbable over predictable timelines would enable tunability in device lifetime and expand the viability of these devices.

Applied machine learning as a driver for polymeric biomaterials design.

Polymers are ubiquitous to almost every aspect of modern society and their use in medical products is similarly pervasive. Despite this, the diversity in commercial polymers used in medicine is stunningly low. Considerable time and resources have been extended over the years towards the development of new polymeric biomaterials which address unmet needs left by the current generation of medical-grade polymers.

Calcium Trimetaphosphate-Loaded Electrospun Poly(Ester Urea) Nanofibers for Periodontal Tissue Engineering.

The objective of this research was to create and appraise biodegradable polymer-based nanofibers containing distinct concentrations of calcium trimetaphosphate (Ca-TMP) for periodontal tissue engineering. Poly(ester urea) (PEU) (5% /) solutions containing Ca-TMP (15%, 30%, 45% /) were electrospun into fibrous scaffolds. The fibers were evaluated using SEM, EDS, TGA, FTIR, XRD, and mechanical tests.

Mechanochromism and Strain-Induced Crystallization in Thiol-yne-Derived Stereoelastomers.

Most elastomers undergo strain-induced crystallization (SIC) under tension; as individual chains are held rigidly in a fixed position by an applied strain, their alignment along the strain field results in a shift from strain-hardening (SH) to SIC. A similar degree of stretching is associated with the tension necessary to accelerate mechanically coupled, covalent chemical responses of mechanophores in overstretched chains, raising the possibility of an interplay between the macroscopic response of SIC and the molecular response of mechanophore activation. Here, thiol-yne-derived stereoelastomers doped covalently with a dipropiolate-derivatized spiropyran (SP) mechanophore (0.

Immune engineered extracellular vesicles to modulate T cell activation in the context of type 1 diabetes.

Extracellular vesicles (EVs) can affect immune responses through antigen presentation and costimulation or coinhibition. We generated designer EVs to modulate T cells in the context of type 1 diabetes, a T cell-mediated autoimmune disease, by engineering a lymphoblast cell line, K562, to express HLA-A*02 (HLA-A2) alongside costimulatory CD80 and/or coinhibitory programmed death ligand 1 (PD-L1). EVs presenting HLA-A2 and CD80 activated CD8 T cells in a dose, antigen, and HLA-specific manner.