A comparison between two full-scale MBR and CAS municipal wastewater treatment plants: techno-economic-environmental assessment.

A holistic assessment procedure has been used in this study for comparing conventional activated sludge (CAS) and membrane bioreactor (MBR) processes for the treatment of municipal wastewater. Technical, social, administrative, economic and environmental impacts have been evaluated based on 1 year of operational data from three full-scale lines (one MBR and two CAS) working in parallel in a large municipal treatment plant. The comparative assessment evidences a slight advantage of the conventional process in the studied case, essentially due to lower costs, complexity and energy consumption.

Enhanced Versus Conventional Sludge Anaerobic Processes: Performances and Techno-Economic Assessment.

Sewage sludge processing is a key issue in water resource recovery facilities due to the inefficacy of conventional treatments to produce high quality biosolids to be safely used in agriculture. Under this framework, the performances of several enhanced stabilization processes, namely ultrasound-pretreated Mesophilic Anaerobic Digestion (US+MAD), thermophilic anaerobic digestion (TAD), thermal-pretreated TAD (TH+TAD) and ultrasound-pretreated inverse Temperature Phased Anaerobic Digestion (US+iTPAD) have been investigated. Such enhanced processes resulted in higher biogas yields and higher destruction of pathogens with respect to conventional MAD process, thus suggesting their feasibility in full-scale implementation perspectives.

Techno-economic and environmental assessment of sewage sludge wet oxidation.

Today, several technologies and management strategies are proposed and applied in wastewater treatment plants (WWTPs) to minimise sludge production and contamination. In order to avoid a shifting of burdens between different areas, their techno-economic and environmental performance has to be carefully evaluated. Wet oxidation (WO) is an alternative solution to incineration for recovering energy in sewage sludge while converting it to mostly inorganic residues.

Method for technical, economic and environmental assessment of advanced sludge processing routes.

The legislative framework in force in Europe entails restrictive effluent standards for sensitive areas, and quite severe restrictions on the properties of residual sewage sludge, both for landfill disposal and for agricultural use. Several technologies and management strategies have been proposed and applied in wastewater treatment plants to minimise sludge production and contamination. However, their techno-economic and environmental performance has to be carefully evaluated.

Methodology for technical and economic assessment of advanced routes for sludge processing and disposal.

In order to meet the environmental legislative framework in force in Europe and reduce sludge processing and disposal costs, several sludge treatment technologies and management strategies have been proposed in the last two decades. The evaluation of their technical and economic suitability, case by case, may be a challenge, since many aspects are involved, so that a robust decision support system should be used. Within the ROUTES project (founded within the EU Seventh Framework Programme), the authors have developed an assessment procedure which allows rating several technical factors (such as system reliability, complexity, safety aspects, modularity, etc.

How can sludge dewatering devices be assessed? Development of a new DSS and its application to real case studies.

A key issue in biological Waste Water Treatment Plants (WWTPs) operation is represented by the sludge management. Mechanical dewatering is a crucial stage for sludge volume reduction; though, being a costly operation, its optimization is required. We developed an original experimental methodology to evaluate the technical (dewatering efficiency) and financial (total treatment costs) performance of dewatering devices, which might be used as a DSS (Decision Support System) for WWTP managers.