Validation of galvanomagnetic and thermomagnetic transport measurements using Standard Reference Material 3451.

In the "method of four coefficients," electrical resistivity (ρ), Seebeck coefficient (S), Hall coefficient (RH), and Nernst coefficient (Q) of a material are measured and typically fit or modeled with theoretical expressions based on Boltzmann transport theory to glean experimental insights into features of electronic structure and/or charge carrier scattering mechanisms in materials. Although well-defined and readily available reference materials exist for validating measurements of ρ and S, none currently exists for RH or Q. We show that measurements of all four transport coefficients-ρ, S, RH, and Q-can be validated using a single reference sample, namely, the low-temperature Seebeck coefficient Standard Reference Material® (SRM) 3451 (composition Bi2Te3+x) available from the National Institute for Standards and Technology (NIST) without the need for inter-laboratory sample exchange.

MCP1 Inverts the Correlation between FGF23 and Omega 6/3 Ratio: Is It Also True in Renal Transplantation?

During chronic kidney disease (CKD) progression, an increase in fibroblast growth factor (FGF23) is present. In stage 5, a positive correlation between FGF23 and omega-6 (n-6) polyunsaturated fatty acids (PUFAs) emerges. Hypothesizing that the rising positive correlation between monocyte chemoattractant protein 1 (MCP1) and n-6 in stage 4 could be the cause, we previously explored FGF23 and MCP1's roles in dyslipidemia and cardiovascular risk in CKD.

Metrological characterization of porosity graded β-Ti21S triply periodic minimal surface cellular structure manufactured by laser powder bed fusion.

The design of a functionally graded porous structure (FGPS) for use in prosthetic devices is crucial for meeting both mechanical and biological requirements. One of the most commonly used cellular structures in FGPS is the triply periodic minimal surface (TPMS) structure due to its ability to be defined by implicit equations, which allows for smooth transitions between layers. This study evaluates the feasibility of using a novel β-Ti21S alloy to fabricate TPMS-based FGPS.

Manufacturability of functionally graded porous β-Ti21S auxetic architected biomaterials produced by laser powder bed fusion: Comparison between 2D and 3D metrological characterization.

Functionally graded porous structures (FGPSs) are attracting increasing interest in the manufacture of prostheses that benefit from lower stiffness and optimized pore size for osseointegration. In this work, we explore the possibility of employing FGPSs with auxetic unit cells. Their negative Poisson's ratio was exploited to reduce the loss of connection between prosthesis and bone usually occurring in standard implant loaded under tension and therefore undergoing lateral shrinking.

An Insight into the Defects-Driven Plasticity in Ductile Cast Irons.

The microstructure and tensile behavior of two heavy section castings that had chemical compositions typical of GJS400 were investigated. Conventional metallography, fractography, and micro-Computer Tomography (μ-CT) were employed, enabling the quantification of the volume fractions of eutectic cells with degenerated Chunky Graphite (CHG), which was identified as the major defect in the castings. The Voce equation approach was exploited to evaluate the tensile behaviors of the defective castings for integrity assessment.

Frailty in kidney transplantation: a review on its evaluation, variation and long-term impact.

The problem of frailty in kidney transplantation is an increasingly discussed topic in the transplant field, partially also generated by the multiple comorbidities by which these patients are affected. The criteria currently used to establish the presence and degree of frailty can be rapidly assessed in clinical practice, even in patients with chronic kidney disease (CKD). The main objectives of this work are: (i) to describe the method of evaluation and the impact that frailty has in patients affected by CKD, (ii) to explore how frailty should be studied in the pre-transplant evaluation, (iii) how frailty changes after a transplant and (iv) the impact frailty has over the long term on the survival of renal transplant patients.

Hybrid Ti6Al4V/Silk Fibroin Composite for Load-Bearing Implants: A Hierarchical Multifunctional Cellular Scaffold.

Despite the tremendous technological advances that metal additive manufacturing (AM) has made in the last decades, there are still some major concerns guaranteeing its massive industrial application in the biomedical field. Indeed, some main limitations arise in dealing with their biological properties, specifically in terms of osseointegration. Morphological accuracy of sub-unital elements along with the printing resolution are major constraints in the design workspace of a lattice, hindering the possibility of manufacturing structures optimized for proper osteointegration.

How Vaccinations Changed the Outcome of COVID-19 Infections in Kidney Transplant Patients: Single-Center Experience.

Kidney transplant recipients are a vulnerable population at risk of a life-threatening COVID-19 infection with an incidence of death four-times higher than in the general population. The availability of mRNA COVID-19 vaccines has dramatically changed the fate of this infection also within this fragile population. Transplanted patients have an impaired immunological response also to mRNA vaccines.

Vitamin D Status and SARS-CoV-2 Infection in a Cohort of Kidney Transplanted Patients.

Background: Recently the protective role of 25-hydroxyvitamin D (25(OH)D) against viral infections has been hypothesized. We evaluated the association between vitamin D status and SARS-CoV-2 infection susceptibility and severity in a cohort of kidney transplanted patients (KTxp).

Methods: A total of 61 KTxp with SARS-CoV-2 infection (COV+) were matched with 122 healthy KTxp controls (COV-).

High intensity resistance training as intervention method to knee osteoarthritis.

High intensity resistance training (HI-RT) is a treatment option for Knee Osteoarthritis (KOA). Isotonic machines (leg press, leg extension) are utilized for standardization and reproducibility reasons, but the load used during the protocol is often low, considering that elder people usually have low strength levels, training so with high intensities calculated on low loads. The physiological response of an elder woman trained with high loads on a free weight exercise, the regular barbell deadlift, with a 1 Repetition Maximum (1RM) of 100 kg, can be appreciated in this report, so that for the first time we can see the effect of a one year of high intensity resistance training program on a powerlifting exercise on a 72 year-old woman with KOA.

A 3D-Printed Ultra-Low Young's Modulus β-Ti Alloy for Biomedical Applications.

The metastable β-Ti21S alloy is evaluated as a potential candidate for biomedical parts. Near fully dense (99.75 ± 0.

Study of the Compression Behaviour of Ti6Al4V Trabecular Structures Produced by Additive Laser Manufacturing.

The aim of this paper was to investigate the compression properties of several trabecular structures produced by additive laser manufacturing of a Ti6Al4V, having different densities and unit cells. Filling space structures were investigated, with different unit cells characterized by both bending-dominated and stretching-dominated behaviour. The stiffness and yield strength were correlated to relative density according to the Gibson and Ashby model.

An ICT and mobile health integrated approach to optimize patients' education on hypertension and its management by physicians: The Patients Optimal Strategy of Treatment(POST) pilot study.

Introduction: Uncontrolled hypertension is largely attributed to unsatisfactory doctor's engagement in its optimal management and to poor patients' compliance to therapeutic interventions. ICT and mobile Health solutions might improve these conditions, being widely available and providing highly effective communication strategies.

Objective: To evaluate whether ICT and mobile Health tools are able to improve hypertension control by improving doctors' engagement and by increasing patients' education and involvement, and their compliance to lifestyle modification and prescribed drug therapy.

Meta-Review of Metanalytic Studies with Repetitive Transcranial Magnetic Stimulation (rTMS) for the Treatment of Major Depression.

Background: Major Depression (MD) and treatment-resistant depression (TRD) are worldwide leading causes of disability and therapeutic strategies for these impairing and prevalent conditions include pharmacological augmentation strategies and brain stimulation techniques. In this perspective, repetitive transcranial magnetic stimulation (rTMS) is a non-invasive brain stimulation technique with a favorable profile of tolerability which, despite being recently approved by the Food and Drug Administration (FDA) for the treatment of patients with medication-refractory unipolar depression, still raises some doubts about most effective parameters of stimulation.

Methods: A literature search was performed using PubMed for the years 2001 through February 2011 in order to review meta-analytic studies assessing efficacy and safety issues for rTMS in depressive disorders.