Fermi Level Shifts of Organic Semiconductor Films in Ambient Air.

Here, the Fermi level () shifts of several donor and acceptor materials in different atmospheres are systematically studied by following the work function (WF) changes with Kelvin probe measurements, ultraviolet photoelectron spectroscopy, and near-ambient pressure X-ray photoelectron spectroscopy. Reversible shifts are found with the trend of higher WFs measured in ambient air and lower WFs measured in high vacuum compared to the WFs measured in ultrahigh vacuum. The shifts are energy level and morphology-dependent, and two mechanisms are proposed: (1) competition between p-doping induced by O and HO/O complexes and n-doping induced by HO; (2) polar HO molecules preferentially modifying the ionization energy of one of the frontier molecular orbitals over the other.

Decoupling Conductivity, Heterogeneous Electron Transfer Rate, and Diffusion in Organic Molecular Electrocatalysis: Oxygen Reduction Reaction on Poly(3,4-ethylenedioxythiophene).

The electrified production of hydrogen peroxide (HO) by oxygen reduction reaction (ORR) is attractive to increase the sustainability of chemical industry. Here the same chains of intrinsically conductive polymer, poly(3,4-ethylenedioxythiophene) (PEDOT) are utilized, as ORR electrocatalyst, while varying polymeric primary dopants (PSS and Nafion) and the level of secondary doping with DMSO. These changes modulate various properties of the film, such as its microscale organization and electronic conductivity.

Effects of Alkyl Spacer Length in Carbazole-Based Self-Assembled Monolayer Materials on Molecular Conformation and Organic Solar Cell Performance.

Carbazole-based self-assembled monolayer (SAM) materials as hole transport layers (HTL) have led organic solar cells (OSCs) to state-of-the-art photovoltaic performance. Nonetheless, the impact of the alkyl spacer length of SAMs remains inadequately understood. To improve the knowledge, four dichloride-substituted carbazole-based SAMs (from 2Cl-2PACz to 2Cl-5PACz) with spacer lengths of 2-5 carbon atoms is developed.

A Polymeric Two-in-One Electron Transport Layer and Transparent Electrode for Efficient Indoor All-Organic Solar Cells.

Transparent electrodes (TEs) are vital in optoelectronic devices, enabling the interaction of light and charges. While indium tin oxide (ITO) has traditionally served as a benchmark TE, its high cost prompts the exploration of alternatives to optimize electrode characteristics and improve device efficiencies. Conducting polymers, which combine polymer advantages with metal-like conductivity, emerge as a promising solution for TEs.

Reducing nonradiative recombination for highly efficient inverted perovskite solar cells via a synergistic bimolecular interface.

Reducing interface nonradiative recombination is important for realizing highly efficient perovskite solar cells. In this work, we develop a synergistic bimolecular interlayer (SBI) strategy via 4-methoxyphenylphosphonic acid (MPA) and 2-phenylethylammonium iodide (PEAI) to functionalize the perovskite interface. MPA induces an in-situ chemical reaction at the perovskite surface via forming strong P-O-Pb covalent bonds that diminish the surface defect density and upshift the surface Fermi level.

A Highly Conductive -Type Conjugated Polymer Synthesized in Water.

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a benchmark hole-transporting (-type) polymer that finds applications in diverse electronic devices. Most of its success is due to its facile synthesis in water, exceptional processability from aqueous solutions, and outstanding electrical performance in ambient. Applications in fields like (opto-)electronics, bioelectronics, and energy harvesting/storage devices often necessitate the complementary use of both -type and -type (electron-transporting) materials.

Photocatalytic doping of organic semiconductors.

Chemical doping is an important approach to manipulating charge-carrier concentration and transport in organic semiconductors (OSCs) and ultimately enhances device performance. However, conventional doping strategies often rely on the use of highly reactive (strong) dopants, which are consumed during the doping process. Achieving efficient doping with weak and/or widely accessible dopants under mild conditions remains a considerable challenge.

Photoluminescence quantum yield of carbon dots: emission due to multiple centers excitonic emission.

Carbon dots (CDs) are recognized as promising fluorescent nanomaterials with bright emission and large variations of photoluminescence quantum yield (PLQY). However, there is still no unique approach for explanation of mechanisms and recipes for synthetic procedures/chemical composition of CDs responsible for the enhancement of PLQY. Here, we compare photophysical behavior and PLQY of two types of CDs synthesized by different routes, leading to the different extent of oxidation and composition.

Mapping Uncharted Lead-Free Halide Perovskites and Related Low-Dimensional Structures.

Research on perovskites has grown exponentially in the past decade due to the potential of methyl ammonium lead iodide in photovoltaics. Although these devices have achieved remarkable and competitive power conversion efficiency, concerns have been raised regarding the toxicity of lead and its impact on scaling up the technology. Eliminating lead while conserving the performance of photovoltaic devices is a great challenge.

Ground-state electron transfer in all-polymer donor:acceptor blends enables aqueous processing of water-insoluble conjugated polymers.

Water-based conductive inks are vital for the sustainable manufacturing and widespread adoption of organic electronic devices. Traditional methods to produce waterborne conductive polymers involve modifying their backbone with hydrophilic side chains or using surfactants to form and stabilize aqueous nanoparticle dispersions. However, these chemical approaches are not always feasible and can lead to poor material/device performance.

Switchable Broadband Terahertz Absorbers Based on Conducting Polymer-Cellulose Aerogels.

Terahertz (THz) technologies provide opportunities ranging from calibration targets for satellites and telescopes to communication devices and biomedical imaging systems. A main component will be broadband THz absorbers with switchability. However, optically switchable materials in THz are scarce and their modulation is mostly available at narrow bandwidths.

Industrial Kraft Lignin Based Binary Cathode Interface Layer Enables Enhanced Stability in High Efficiency Organic Solar Cells.

Herein, a binary cathode interface layer (CIL) strategy based on the industrial solvent fractionated LignoBoost kraft lignin (KL) is adopted for fabrication of organic solar cells (OSCs). The uniformly distributed phenol moieties in KL enable it to easily form hydrogen bonds with commonly used CIL materials, i.e.

Stable organic electrochemical neurons based on p-type and n-type ladder polymers.

Organic electrochemical transistors (OECTs) are a rapidly advancing technology that plays a crucial role in the development of next-generation bioelectronic devices. Recent advances in p-type/n-type organic mixed ionic-electronic conductors (OMIECs) have enabled power-efficient complementary OECT technologies for various applications, such as chemical/biological sensing, large-scale logic gates, and neuromorphic computing. However, ensuring long-term operational stability remains a significant challenge that hinders their widespread adoption.

In Situ Spectroscopic and Electrical Investigations of Ladder-type Conjugated Polymers Doped with Alkali Metals.

Ladder-type conjugated polymers exhibit a remarkable performance in (opto)electronic devices. Their double-stranded planar structure promotes an extended π-conjugation compared to inter-ring-twisted analogues, providing an excellent basis for exploring the effects of charge localization on polaron formation. Here, we investigated alkali-metal n-doping of the ladder-type conjugated polymer (polybenzimidazobenzophenanthroline) (BBL) through detailed in situ spectroscopic and electrical characterizations.

Constructing Chromium Multioxide Hole-Selective Heterojunction for High-Performance Perovskite Solar Cells.

Perovskite solar cells (PSCs) suffer from significant nonradiative recombination at perovskite/charge transport layer heterojunction, seriously limiting their power conversion efficiencies. Herein, solution-processed chromium multioxide (CrO ) is judiciously selected to construct a MAPbI /CrO /Spiro-OMeTAD hole-selective heterojunction. It is demonstrated that the inserted CrO not only effectively reduces defect sites via redox shuttle at perovskite contact, but also decreases valence band maximum (VBM)-HOMO offset between perovskite and Spiro-OMeTAD.

Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells.

Record power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) have been obtained with the organic hole transporter 2,2',7,7'-tetrakis(,-di--methoxyphenyl-amine)9,9'-spirobifluorene (spiro-OMeTAD). Conventional doping of spiro-OMeTAD with hygroscopic lithium salts and volatile 4--butylpyridine is a time-consuming process and also leads to poor device stability. We developed a new doping strategy for spiro-OMeTAD that avoids post-oxidation by using stable organic radicals as the dopant and ionic salts as the doping modulator (referred to as ion-modulated radical doping).

Mapping the energy level alignment at donor/acceptor interfaces in non-fullerene organic solar cells.

Energy level alignment (ELA) at donor (D) -acceptor (A) heterojunctions is essential for understanding the charge generation and recombination process in organic photovoltaic devices. However, the ELA at the D-A interfaces is largely underdetermined, resulting in debates on the fundamental operating mechanisms of high-efficiency non-fullerene organic solar cells. Here, we systematically investigate ELA and its depth-dependent variation of a range of donor/non-fullerene-acceptor interfaces by fabricating and characterizing D-A quasi bilayers and planar bilayers.

Electrical Tuning of Plasmonic Conducting Polymer Nanoantennas.

Nanostructures of conventional metals offer manipulation of light at the nanoscale but are largely limited to static behavior due to fixed material properties. To develop the next frontier of dynamic nano-optics and metasurfaces, this study utilizes the redox-tunable optical properties of conducting polymers, as recently shown to be capable of sustaining plasmons in their most conducting oxidized state. Electrically tunable conducting polymer nano-optical antennas are presented, using nanodisks of poly(3,4-ethylenedioxythiophene:sulfate) (PEDOT:Sulf) as a model system.

Understanding Interface Dipoles at an Electron Transport Material/Electrode Modifier for Organic Electronics.

Interface dipoles formed at an electrolyte/electrode interface have been widely studied and interpreted using the "double dipole step" model, where the dipole vector is determined by the size and/or range of motion of the charged ions. Some electron transport materials (ETMs) with lone pairs of electrons on heteroatoms exhibit a similar interfacial behavior. However, the origin of the dipoles in such materials has not yet been explored in great depth.

A high-conductivity n-type polymeric ink for printed electronics.

Conducting polymers, such as the p-doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), have enabled the development of an array of opto- and bio-electronics devices. However, to make these technologies truly pervasive, stable and easily processable, n-doped conducting polymers are also needed. Despite major efforts, no n-type equivalents to the benchmark PEDOT:PSS exist to date.