Stress relaxation in quasi-two-dimensional self-assembled nanoparticle monolayers.

We experimentally probed the stress relaxation of a monolayer of iron oxide nanoparticles at the water-air interface. Upon drop-casting onto a water surface, the nanoparticles self-assembled into islands of two-dimensional hexagonally close packed crystalline domains surrounded by large voids. When compressed laterally, the voids gradually disappeared as the surface pressure increased.

Coupling X-Ray Reflectivity and In Silico Binding to Yield Dynamics of Membrane Recognition by Tim1.

The dynamic nature of lipid membranes presents significant challenges with respect to understanding the molecular basis of protein/membrane interactions. Consequently, there is relatively little known about the structural mechanisms by which membrane-binding proteins might distinguish subtle variations in lipid membrane composition and/or structure. We have previously developed a multidisciplinary approach that combines molecular dynamics simulation with interfacial x-ray scattering experiments to produce an atomistic model for phosphatidylserine recognition by the immune receptor Tim4.

Increased humidity can soften glassy Langmuir polymer films by two mechanisms: plasticization of the polymer material, and suppression of the evaporation cooling effect.

Glassy Langmuir polymer films exhibit a rapid increase in surface pressure at high compression. High relative humidity typically mitigates this increase in surface pressure. In an attempt to understand the origin of this phenomenon, we investigated the effects of relative humidity on surface pressure-area isotherm properties for four different types of polymers with similar bulk glass transition temperatures: poly(d,l-lactic-co-glycolic acid) (PLGA, T ≈ 45 °C), poly(vinyl acetate) (PVAc, T ≈ 41 °C), poly(n-propyl methacrylate) (PnPMA, T ≈ 41 °C), and poly(vinyl stearate) (PVS, T ≈ 47 °C, T ≈ 47 °C).

Cyclization Improves Membrane Permeation by Antimicrobial Peptoids.

The peptidomimetic approach has emerged as a powerful tool for overcoming the inherent limitations of natural antimicrobial peptides, where the therapeutic potential can be improved by increasing the selectivity and bioavailability. Restraining the conformational flexibility of a molecule may reduce the entropy loss upon its binding to the membrane. Experimental findings demonstrate that the cyclization of linear antimicrobial peptoids increases their bactericidal activity against Staphylococcus aureus while maintaining high hemolytic concentrations.

Liquid Surface X-ray Studies of Gold Nanoparticle-Phospholipid Films at the Air/Water Interface.

Amphiphilic phospholipids and nanoparticles functionalized with hydrophobic capping ligands have been extensively investigated for their capacity to self-assemble into Langmuir monolayers at the air/water interface. However, understanding of composite films consisting of both nanoparticles and phospholipids, and by extension, the complex interactions arising between nanomaterials and biological membranes, remains limited. In this work, dodecanethiol-capped gold nanoparticles (Au-NPs) with an average core diameter of 6 nm were incorporated into 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayers with surface densities ranging from 0.

Observation of Ordered Structures in Counterion Layers near Wet Charged Surfaces: A Potential Mechanism for Charge Inversion.

Charged (e.g., colloidal) particles in aqueous solutions will sometimes behave as though their effective charge has reversed, rather than reduced, by the attracted counterions.

Novel comparison of microscopy and diffraction techniques on the structure of iron oxide nanoparticle monolayers transferred by Langmuir-Schaefer method.

Iron oxide nanoparticles undergo self-assembly into well-ordered monolayer films of macroscopic size at the air-water interface. This self-assembly process is the result of the van der Waals forces between the constituent particles. For roughly spherical particles, this monolayer is a 2D hexagonal close packed lattice.

Humidity-dependent compression-induced glass transition of the air-water interfacial Langmuir films of poly(D,L-lactic acid-ran-glycolic acid) (PLGA).

Constant rate compression isotherms of the air-water interfacial Langmuir films of poly(D,L-lactic acid-ran-glycolic acid) (PLGA) show a distinct feature of an exponential increase in surface pressure in the high surface polymer concentration regime. We have previously demonstrated that this abrupt increase in surface pressure is linked to the glass transition of the polymer film, but the detailed mechanism of this process is not fully understood. In order to obtain a molecular-level understanding of this behavior, we performed extensive characterizations of the surface mechanical, structural and rheological properties of Langmuir PLGA films at the air-water interface, using combined experimental techniques including the Langmuir film balance, X-ray reflectivity and double-wall-ring interfacial rheometry methods.

Interfacial localization and voltage-tunable arrays of charged nanoparticles.

Experiments and computer simulations provide a new perspective that strong correlations of counterions with charged nanoparticles can influence the localization of nanoparticles at liquid-liquid interfaces and support the formation of voltage-tunable nanoparticle arrays. We show that ion condensation onto charged nanoparticles facilitates their transport from the aqueous-side of an interface between two immiscible electrolyte solutions to the organic-side, but contiguous to the interface. Counterion condensation onto the highly charged nanoparticles overcomes the electrostatic barrier presented by the low permittivity organic material, thus providing a mechanism to transport charged nanoparticles into organic phases with implications for the distribution of nanoparticles throughout the environment and within living organisms.

X-ray studies of interfacial strontium-extractant complexes in a model solvent extraction system.

The interfacial behavior of a model solvent extraction liquid-liquid system, consisting of solutions of dihexadecyl phosphate (DHDP) in dodecane and SrCl2 in water, was studied to determine the structure of the interfacial ion-extractant complex and its variation with pH. Previous experiments on a similar extraction system with ErCl3 demonstrated that the kinetics of the extraction process could be greatly retarded by cooling through an adsorption transition, thus providing a method to immobilize ion-extractant complexes at the interface and further characterize them with X-ray interface-sensitive techniques. Here, we use this same method to study the SrCl2 system.

Observation of a rare earth ion-extractant complex arrested at the oil-water interface during solvent extraction.

Selective extraction of metal ions from a complex aqueous mixture into an organic phase is used to separate toxic or radioactive metals from polluted environments and nuclear waste, as well as to produce industrially relevant metals, such as rare earth ions. Selectivity arises from the choice of an extractant amphiphile, dissolved in the organic phase, which interacts preferentially with the target metal ion. The extractant-mediated process of ion transport from an aqueous to an organic phase takes place at the aqueous-organic interface; nevertheless, little is known about the molecular mechanism of this process despite its importance.

Molecular mechanism for differential recognition of membrane phosphatidylserine by the immune regulatory receptor Tim4.

Recognition of phosphatidylserine (PS) lipids exposed on the extracellular leaflet of plasma membranes is implicated in both apoptotic cell removal and immune regulation. The PS receptor T cell immunoglobulin and mucin-domain-containing molecule 4 (Tim4) regulates T-cell immunity via phagocytosis of both apoptotic (high PS exposure) and nonapoptotic (intermediate PS exposure) activated T cells. The latter population must be removed at lower efficiency to sensitively control immune tolerance and memory cell population size, but the molecular basis for how Tim4 achieves this sensitivity is unknown.

Macroscopic lateral heterogeneity observed in a laterally mobile immiscible mixed polyelectrolyte-neutral polymer brush.

We studied mixed poly(ethylene oxide) (PEO) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes. The question we attempted to answer was: when the chain grafting points are laterally mobile, how will this lateral mobility influence the structure and phase behavior of the mixed brush? Three different model mixed PEO/PDMAEMA brush systems were prepared: (1) a laterally mobile mixed brush by spreading onto the air-water interface a mixture of poly(ethylene oxide)-poly(n-butyl acrylate) (PEO-PnBA) and poly(2-(dimethylamino)ethyl methacrylate)-poly(n-butyl acrylate) (PDMAEMA-PnBA) diblock copolymers (the specific diblock copolymers used will be denoted as PEO113-PnBA100 and PDMAEMA118-PnBA100, where the subscripts refer to the number-average degrees of polymerization of the individual blocks), (2) a mobility-restricted (inseparable) version of the above mixed brush prepared using a PEO-PnBA-PDMAEMA triblock copolymer (denoted as PEO113-PnBA89-PDMAEMA120) having respective brush molecular weights matched with those of the diblock copolymers, and (3) a different laterally mobile mixed PEO and PDMAEMA brush prepared from a PEO113-PnBA100 and PDMAEMA200-PnBA103 diblock copolymer combination, which represents a further more height-mismatched mixed brush situation than described in (1). These three mixed brush systems were investigated by surface pressure-area isotherm and X-ray (XR) reflectivity measurements.

Assembly of amorphous clusters under floating monolayers: a comparison of in situ and ex situ techniques.

We report synchrotron X-ray scattering studies of biomimetic crystallization of hydroxyapatite (the primary constituent of bone), using monolayers of fatty acid molecules floating on simulated body fluid (SBF) as well as aqueous solutions of calcium phosphate. A ∼10 Å thick film of amorphous material is observed to form immediately at the molecular monolayer, consistent with the proposed formation of "Posner clusters". This layer becomes denser but not significantly thicker as the subphase concentration and the temperature approach physiological conditions.

Synchrotron X-ray studies of rapidly evolving morphology of self-assembled nanoparticle films under lateral compression.

Interfacial nanostructures represent a class of systems that are highly relevant to studies of quasi-2D phases, chemical self-assembly, surfactant behavior, and biologically relevant membranes. Previous studies have shown that under lateral compression a Langmuir film of gold (Au) nanoparticles assembled at the liquid-air interface exhibits rich mechanical behavior: it undergoes a rapid structural and morphological evolution from a monolayer to a trilayer via an intermediate hash-like phase. We report the results of studying this structural evolution using grazing incidence X-ray off-specular scattering (GIXOS).

Comparison of the mechanical properties of self-assembled Langmuir monolayers of nanoparticles and phospholipids.

Nanoparticles with hydrophobic capping ligands and amphiphilic phospholipids are both found to self-assemble into monolayer films when deposited on the air/water interface. By separately measuring the anisotropic stress response of these films under uniaxial compression, we obtain both the 2D compressive and shear moduli of a range of different thin nanoparticle and phospholipid films. The compressive moduli of both nanoparticle and lipid films in the solid phase are on the same order of magnitude, whereas the shear moduli of the lipid films are found to be significantly lower.

Structural characterization of a model gram-negative bacterial surface using lipopolysaccharides from rough strains of Escherichia coli.

Lipopolysaccharides (LPS) make up approximately 75% of the Gram-negative bacterial outer membrane (OM) surface, but because of the complexity of the molecule, there are very few model OMs that include LPS. The LPS molecule consists of lipid A, which anchors the LPS within the OM, a core polysaccharide region, and a variable O-antigen polysaccharide chain. In this work we used RcLPS (consisting of lipid A plus the first seven sugars of the core polysaccharide) from a rough strain of Escherichia coli to form stable monolayers of LPS at the air-liquid interface.

Ion distributions at the water/1,2-dichloroethane interface: potential of mean force approach to analyzing X-ray reflectivity and interfacial tension measurements.

We present X-ray reflectivity and interfacial tension measurements of the electrified liquid/liquid interface between two immiscible electrolyte solutions for the purpose of understanding the dependence of interfacial ion distributions on the applied electric potential difference across the interface. The aqueous phase contains alkali-metal chlorides, including LiCl, NaCl, RbCl, or CsCl, and the organic phase is a 1,2-dichloroethane solution of bis(triphenylphosphor anylidene) ammonium tetrakis(pentafluorophenyl)borate (BTPPATPFB). Selected data for a subset of electric potential differences are analyzed to determine the potentials of mean force for Li(+), Rb(+), Cs(+), BTPPA(+), and TPFB(-).

Tuning ion correlations at an electrified soft interface.

Ion distributions play a central role in various settings-from biology, where they mediate the electrostatic interactions between charged biomolecules in solution, to energy storage devices, where they influence the charging properties of supercapacitors. These distributions are determined by interactions dictated by the chemical properties of the ions and their environment as well as the long-range nature of the electrostatic force. Recent theoretical and computational studies have explored the role of correlations between ions, which have been suggested to underlie a number of counterintuitive results, such as like-charge attraction.

Molecular structure of interfacial human meibum films.

Meibum is the primary component of the tear film lipid layer. Thought to play a role in tear film stabilization, understanding the physical properties of meibum and how they change with disease will be valuable in identifying dry eye treatment targets. Grazing incidence X-ray diffraction and X-ray reflectivity were applied to meibum films at an air-water interface to identify molecular organization.

Reduced Water Density in a Poly(ethylene oxide) Brush.

A model poly(ethylene oxide) (PEO) brush system, prepared by spreading a poly(ethylene oxide)-poly(n-butyl acrylate) (PEO-PnBA) amphiphilic diblock copolymer onto an air-water interface, was investigated under various grafting density conditions by using the X-ray reflectivity (XR) technique. The overall electron density profiles of the PEO-PnBA monolayer in the direction normal to the air-water interface were determined from the XR data. From this analysis, it was found that inside of the PEO brush, the water density is significantly lower than that of bulk water, in particular, in the region close to the PnBA-water interface.

Charge, stereochemistry, or epitaxy? Toward controlled biomimetic nucleation at mixed monolayer templates.

Floating monolayer mixtures of cationic dioctadecyldimethyldiammonium bromide and anionic lipids were used as variable templates for the biomimetic nucleation of calcium carbonate and studied using grazing incidence X-ray diffraction. Varying the ratio of constituents changes the monolayer charge, structure, and molecular tilt. The nucleating surface of calcite also changes as the mixture is varied, and at an 80:20 ratio the (012) face is seen under a floating monolayer template for the first time.

Reverse self-assembly: (111)-oriented gold crystallization at alkylthiol monolayer templates.

It has long been known that thiol-terminated molecules self-assemble as commensurate monolayers on Au(111) surfaces. By spreading floating octadecanethiol monolayers on aqueous solutions of chloroauric acid (HAuCl4) and using x rays to reduce the gold ions as well as to probe the structure, we have observed the nucleation of (111)-oriented Au nanoparticles at thiol surfaces. This process may be similar to the formation of biogenic gold by bacteria.

Insertion mechanism of a poly(ethylene oxide)-poly(butylene oxide) block copolymer into a DPPC monolayer.

Interactions between amphiphilic block copolymers and lipids are of medical interest for applications such as drug delivery and the restoration of damaged cell membranes. A series of monodisperse poly(ethylene oxide)-poly(butylene oxide) (EOBO) block copolymers were obtained with two ratios of hydrophilic/hydrophobic block lengths. We have explored the surface activity of EOBO at a clean interface and under 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayers as a simple cell membrane model.