Recycling of Tire-Derived Fiber: The Contribution of Steel Cord on the Properties of Lightweight Concrete Based on Perlite Aggregate.

The increasing amount of waste from the vulcanization industry has become a serious environmental challenge. Even the partial reuse of the steel contained in tires as dispersed reinforcement in the production of new building materials may contribute to reducing the environmental impact of this industry while supporting the principle of sustainable development. In this study, the concrete samples were made of Portland cement, tap water, lightweight perlite aggregates, and steel cord fibers.

Performance Properties of Cement-Glass Composite Bricks (CGCB) with Additively Manufactured (AM) Polymeric Scaffolding.

This study provides an alternative to traditional masonry materials: a cement-glass composite brick (CGCB), with a printed polyethylene terephthalate glycol (PET-G) internal scaffolding (gyroidal structure). This newly designed building material consists of 86% waste (78% glass waste, and 8% recycled PET-G). It can respond to the construction market's needs and provide a cheaper alternative to traditional materials.

Supporting the Wound Healing Process-Curcumin, Resveratrol and Baicalin in In Vitro Wound Healing Studies.

The purpose of the investigation was to evaluate the effect of the selected bioflavonoids curcumin, resveratrol and baicalin on the wound healing process in an in vitro model. In the study, Balb3t3 and L929 cell lines were used. The first step was the evaluation of the cytotoxicity of the substances tested (MTT assay).

What Makes a Floor Slippery? A Brief Experimental Study of Ceramic Tiles Slip Resistance Depending on Their Properties and Surface Conditions.

The safety of the use of construction facilities should be a priority in today's busy world, where it is not difficult to get involved in an accident. Most of them, due to the pace at which we live today, are caused by slips, trips, and falls. This work presents a detailed analysis of the resistance of ceramic floors to these events, taking into account the surface properties and conditions (dry/wet), which, as presented, have a significant impact on the final slip resistance values.

Safety Comes First: Novel Styrene Butadiene Rubber (SBR) and Ethylene Propylene Diene Monomer (EPDM) Surfaces as a Response to Sport Injuries.

An athlete's performance depends not only on the shoes they wear but also on the surface used in sports facilities. In addition, it can significantly contribute to reducing injuries, which are easy to get during sports competitions. In the present study, we wanted to investigate whether recycled styrene butadiene rubber (SBR) and ethylene propylene diene monomer (EPDM) could be used in the production of sports surfaces.

An Experimental Study of Possible Post-War Ferronickel Slag Waste Disposal in Szklary (Lower Silesian, Poland) as Partial Aggregate Substitute in Concrete: Characterization of Physical, Mechanical, and Thermal Properties.

Aggregates derived from waste, due to the growing awareness of global warming, are more and more often used in the concrete production process. This way, their disposal not only reduces the pollution of the Earth but also lowers the consumption of natural aggregates, which are limited. One of the new "eco" aggregates may be a ferronickel slag waste (FNSW), which was generated in post-war metallurgical processes and stored in Szklary (Lower Silesian, Poland).

Influence of Polypropylene, Glass and Steel Fiber on the Thermal Properties of Concrete.

The variety of approaches to tackle climate change reflects the size of this global problem. No technology will act as a panacea to cure the greenhouse gas emissions problem, but new building materials with byproducts or even wastes have the potential to play a major role in reducing the environmental impacts of the building sector. In this study, three potential solutions of concrete with dispersed reinforcement in the form of recycled fibers (polypropylene, glass and steel) were examined.

Mechanical and Material Properties of Mortar Reinforced with Glass Fiber: An Experimental Study.

The progressive increase in the amount of glass waste produced each year in the world made it necessary to start the search for new recycling methods. This work summarizes the experimental results of the study on mortar samples containing dispersed reinforcement in the form of glass fibers, fully made from melted glass waste (bottles). Mortar mixes were prepared according to a new, laboratory-calculated recipe containing glass fibers, granite as aggregate, polycarboxylate-based deflocculant and Portland cement (52.

Brewer's Spent Grains-Valuable Beer Industry By-Product.

The brewing sector is a significant part of the global food industry. Breweries produce large quantities of wastes, including wastewater and brewer's spent grains. Currently, upcycling of food industry by-products is one of the principles of the circular economy.

Effect of Waste Glass Addition as a Replacement for Fine Aggregate on Properties of Mortar.

A responsible approach towards sustainable development requires the use of environmentally friendly, low-carbon, and energy-intensive materials. One positive way is to use glass waste as a replacement for fine natural aggregate. For this purpose, the effects of adding glass cullet to the mechanical properties of mortar were carried out.

Characteristics of Recycled Polypropylene Fibers as an Addition to Concrete Fabrication Based on Portland Cement.

High-performance concrete has low tensile strength and brittle failure. In order to improve these properties of unreinforced concrete, the effects of adding recycled polypropylene fibers on the mechanical properties of concrete were investigated. The polypropylene fibers used were made from recycled plastic packaging for environmental reasons (long degradation time).