A wearable gait lab powered by sensor-driven digital twins for quantitative biomechanical analysis post-stroke.

Commonly, quantitative gait analysis post-stroke is performed in fully equipped laboratories housing costly technologies for quantitative evaluation of a patient's movement capacity. Combining such technologies with an electromyography (EMG)-driven musculoskeletal model can estimate muscle force properties non-invasively, offering clinicians insights into motor impairment mechanisms. However, lab-constrained areas and time-demanding sensor setup and data processing limit the practicality of these technologies in routine clinical care.

Personalized Alpha-Motoneuron Pool Models Driven by Neural Data Encode the Mechanisms Controlling Rate of Force Development.

The central nervous system employs distinct motor control strategies depending on task demands. Accordingly, the activity of alpha-motoneuron (MN) pools innervating skeletal muscle fibers is modulated based on muscle force and rate of force development (RFD). In human subjects, biophysical MN models enable inferring in vivo the neural processes (e.

Benchmarking commercially available soft and rigid passive back exoskeletons for an industrial workplace.

Low-back pain is a common occupational hazard for industrial workers. Several studies show the advantages of using rigid and soft back-support passive exoskeletons and exosuits (exos) to reduce the low-back loading and risk of injury. However, benefits of using these exos have been shown to be task-specific.

Electromyography-driven musculoskeletal models with time-varying fatigue dynamics improve lumbosacral joint moments during lifting.

Muscle fatigue is prevalent across different aspects of daily life. Tracking muscle fatigue is useful to understand muscle overuse and possible risk of injury leading to musculoskeletal disorders. Current fatigue models are not suitable for real-world settings as they are either validated using simulations or non-functional tasks.

A Neuromechanical Model-Based Strategy to Estimate the Operator's Payload in Industrial Lifting Tasks.

One of the main technological barriers hindering the development of active industrial exoskeleton is today represented by the lack of suitable payload estimation algorithms characterized by high accuracy and low calibration time. The knowledge of the payload enables exoskeletons to dynamically provide the required assistance to the user. This work proposes a payload estimation methodology based on personalized Electromyography-driven musculoskeletal models (pEMS) combined with a payload estimation method we called "delta torque" that allows the decoupling of payload dynamical properties from human dynamical properties.

Synergy-Driven Musculoskeletal Modeling to Estimate Muscle Excitations and Joint Moments at Different Walking Speeds in Individuals with Transtibial Amputation.

The main requirement for an amputee is to regain the function of the lost limb. In order to fully benefit from powered prosthetic legs, the user must rely on the dynamic control of the device. Progress in high-level control for powered prosthetic legs is currently challenged by the inability of current control schemes to generalize to large repertoires of movements as well as adapting to external mechanical demands.

Does a Soft Actuated Back Exosuit Influence Multimodal Physiological Measurements and User Perception During an Industry Inspired Task?

Back support soft exosuits are promising solutions to reduce risk of musculoskeletal injuries at workplaces resulting from physically demanding and repetitive lifting tasks. Design of novel active exosuits address the impact on the muscle activity and metabolic costs but do not consider other critical aspects such as comfort and user perception during the intended tasks. Thus, in this study, we describe a novel soft active exosuit in line with its impact on physiological and subjective measures during lifting.

Predictive Control of Peak Achilles Tendon Force in a Simulated System of the Human Ankle Joint with a Parallel Artificial Actuator During Hopping.

Latest advances in wearable exoskeletons for the human lower extremity predominantly focus on minimising metabolic cost of walking. However, there currently is no robotic exoskeleton that gains control on the mechanics of biological tissues such as biological muscles or series-elastic tendons. Achieving robotic control of biological tissue mechanics would enable prevention of musculoskeletal injuries or the personalization of rehabilitation treatments following injury with levels of precisions not attained before.

Trunk extensor muscle endurance and its relationship to action potential conduction velocity and spectral parameters estimated using high-density electromyography.

Trunk extensor muscle fatigue typically manifests as a decline in spectral content of surface electromyography. However, previous research on the relationship of this decline with trunk extensor muscle endurance have shown inconsistent results. The decline of spectral content mainly reflects the decrease in average motor unit action potential conduction velocity (CV).

The Simultaneous Model-Based Estimation of Joint, Muscle, and Tendon Stiffness is Highly Sensitive to the Tendon Force-Strain Relationship.

Objective: Accurate estimation of stiffness across anatomical levels (i.e., joint, muscle, and tendon) in vivo has long been a challenge in biomechanics.

Characterization of Motor Unit Firing and Twitch Properties for Decoding Musculoskeletal Force in the Human Ankle Joint In Vivo.

Understanding how motor units (MUs) contribute to skeletal mechanical force is crucial for unraveling the underlying mechanism of human movement. Alterations in MU firing, contractile and force-generating properties emerge in response to physical training, aging or injury. However, how changes in MU firing and twitch properties dictate skeletal muscle force generation in healthy and impaired individuals remains an open question.

Tapping Into Skeletal Muscle Biomechanics for Design and Control of Lower Limb Exoskeletons: A Narrative Review.

Lower limb exoskeletons and exosuits ("exos") are traditionally designed with a strong focus on mechatronics and actuation, whereas the "human side" is often disregarded or minimally modeled. Muscle biomechanics principles and skeletal muscle response to robot-delivered loads should be incorporated in design/control of exos. In this narrative review, we summarize the advances in literature with respect to the fusion of muscle biomechanics and lower limb exoskeletons.

Automated spatial localization of ankle muscle sites and model-based estimation of joint torque post-stroke via a wearable sensorised leg garment.

Assessing a patient's musculoskeletal function during over-ground walking is a primary objective in post-stroke rehabilitation, due to the importance of walking recovery for everyday life. However, the quantitative assessment of musculoskeletal function currently requires lab-constrained equipment, and labor-intensive analyses, which hampers assessment in standard clinical settings. The development of fully wearable systems for the online estimation of muscle-tendon forces and resulting joint torque would aid clinical assessment of motor recovery, it would enhance the detection of neuro-muscular anomalies and it would consequently enable highly personalized treatments.

A Wearable Real-time Kinematic and Kinetic Measurement Sensor Setup for Human Locomotion.

Current laboratory-based setups (optical marker cameras + force plates) for human motion measurement require participants to stay in a constrained capture region which forbids rich movement types. This study established a fully wearable system, based on commercially available sensors (inertial measurement units + pressure insoles) that can measure both kinematic and kinetic motion data simultaneously and support wireless frame-by-frame streaming. In addition, its capability and accuracy were tested against a conventional laboratory-based setup.

Real-time myoelectric control of wrist/hand motion in Duchenne muscular dystrophy: A case study.

Duchenne muscular dystrophy (DMD) is a genetic disorder that induces progressive muscular degeneration. Currently, the increase in DMD individuals' life expectancy is not being matched by an increase in quality of life. The functioning of the hand and wrist is central for performing daily activities and for providing a higher degree of independence.

Person-specific biophysical modelling of alpha-motoneuron pools driven by in vivo decoded neural synaptic input.

Interfacing with alpha-motoneurons (MNs) is key to understand and control motor impairment and neurorehabilitation technologies. Depending on the neurophysiological condition of each individual, MN pools exhibit distinct neuro-anatomical properties and firing behaviors. Hence, the ability to assess subject-specific characteristics of MN pools is essential for unravelling the neural mechanisms and adaptations underlying motor control, both in healthy and impaired individuals.

Electromyography-driven model-based estimation of ankle torque and stiffness during dynamic joint rotations in perturbed and unperturbed conditions.

The simultaneous modulation of joint torque and stiffness enables humans to perform large repertoires of movements, while versatilely adapting to external mechanical demands. Multi-muscle force control is key for joint torque and stiffness modulation. However, the inability to directly measure muscle force in the intact moving human prevents understanding how muscle force causally links to joint torque and stiffness.

A review of user needs to drive the development of lower limb prostheses.

Background: The development of bionic legs has seen substantial improvements in the past years but people with lower-limb amputation still suffer from impairments in mobility (e.g., altered balance and gait control) due to significant limitations of the contemporary prostheses.

Automated estimation of ankle muscle EMG envelopes and resulting plantar-dorsi flexion torque from 64 garment-embedded electrodes uniformly distributed around the human leg.

The design of personalized movement training and rehabilitation pipelines relies on the ability of assessing the activation of individual muscles concurrently with the resulting joint torques exerted during functional movements. Despite advances in motion capturing, force sensing and bio-electrical recording technologies, the estimation of muscle activation and resulting force still relies on lengthy experimental and computational procedures that are not clinically viable. This work proposes a wearable technology for the rapid, yet quantitative, assessment of musculoskeletal function.

Low back muscle action potential conduction velocity estimated using high-density electromyography.

While a decreasing spectral content of surface electromyography reflects low back muscle fatigue development, reliability of these decreases may be insufficient. Decreasing frequency content is largely determined by decreasing average motor unit action potential conduction velocities (CV), which is considered a more direct measure of muscle fatigue development. However, for the low back muscles it has been proven difficult to identify propagating potentials and consequently estimate the CV.

Adaptation Strategies for Personalized Gait Neuroprosthetics.

Personalization of gait neuroprosthetics is paramount to ensure their efficacy for users, who experience severe limitations in mobility without an assistive device. Our goal is to develop assistive devices that collaborate with and are tailored to their users, while allowing them to use as much of their existing capabilities as possible. Currently, personalization of devices is challenging, and technological advances are required to achieve this goal.

Identification of Motor Unit Twitch Properties in the Intact Human In Vivo.

Restoring natural motor function in neurologically injured individuals is challenging, largely due to the lack of personalization in current neurorehabilitation technologies. Signal-driven neuro-musculoskeletal models may offer a novel paradigm for devising novel closed-loop rehabilitation strategies according to an individual's physiology. However, current modelling techniques are constrained to bipolar electromyography (EMG), thereby lacking the resolution necessary to extract the activity of individual motor units (MUs) in vivo.