Aquatic Mesocosm Strategies for the Environmental Fate and Risk Assessment of Engineered Nanomaterials.

In the past decade, mesocosms have emerged as a useful tool for the environmental study of engineered nanomaterials (ENMs) as they can mimic the relevant exposure scenario of contamination. Herein, we analyzed the scientific outcomes of aquatic mesocosm experiments, with regard to their designs, the ENMs tested, and the end points investigated. Several mesocosm designs were consistently applied in the past decade to virtually mimic various contamination scenarios with regard to ecosystem setting as well as ENMs class, dose, and dosing.

Comparison of Nanomaterials for Delivery of Double-Stranded RNA in .

RNA interference is a promising crop protection technology that has seen rapid development in the past several years. Here, we investigated polyamino acid biopolymers, inorganic nanomaterials, and hybrid organic-inorganic nanomaterials for delivery of dsRNA and efficacy of gene knockdown using the model nematode . Using an oral route of delivery, we are able to approximate how nanomaterials will be delivered in the environment.

Aqueous aging of a silica coated TiO UV filter used in sunscreens: investigations at the molecular scale with dynamic nuclear polarization NMR.

Short-term, aqueous aging of a commercial nanocomposite TiO UV filter with a protective SiO shell was examined in abiotic simulated fresh- and seawater. Under these conditions, the SiO layer was quantitatively removed (∼88-98%) within 96 hours, as determined using inductively coupled plasma-atomic emission spectroscopy (ICP-AES). While these bulk ICP-AES analyses suggested almost identical SiO shell degradation after aging in fresh- and seawater, surface sensitive Si dynamic nuclear polarization (DNP) solid-state nuclear magnetic resonance (SSNMR), with signal enhancements of 5-10× compared to standard SSNMR, was able to distinguish differences in the aged nanocomposites at the molecular level.

Monitoring the Environmental Aging of Nanomaterials: An Opportunity for Mesocosm Testing?

Traditional aging protocols typically examine only the effects of a limited number of stresses, and relatively harsh conditions may trigger degradation mechanisms that are not observed in actual situations. Environmental aging is, in essence, the complex interaction of multiple mechanical, physicochemical and biological stresses. As yet, there is no (pre)standardized procedure that addresses this issue in a satisfactory manner.

Non-linear release dynamics for a CeO nanomaterial embedded in a protective wood stain, due to matrix photo-degradation.

The release of CeO-bearing residues during the weathering of an acrylic stain enriched with CeO nanomaterial designed for wood protection (Nanobyk brand additive) was studied under two different scenarios: (i) a standard 12-weeks weathering protocol in climate chamber, that combined condensation, water spraying and UV-visible irradiation and (ii) an alternative accelerated 2-weeks leaching batch assay relying on the same weathering factors (water and UV), but with a higher intensity of radiation and immersion phases. Similar Ce released amounts were evidenced for both scenarios following two phases: one related to the removal of loosely bound material with a relatively limited release, and the other resulting from the degradation of the stain, where major release occurred. A non-linear evolution of the release with the UV dose was evidenced for the second phase.

Stealth Biocompatible Si-Based Nanoparticles for Biomedical Applications.

A challenge regarding the design of nanocarriers for drug delivery is to prevent their recognition by the immune system. To improve the blood residence time and prevent their capture by organs, nanoparticles can be designed with stealth properties using polymeric coating. In this study, we focused on the influence of surface modification with polyethylene glycol and/or mannose on the stealth behavior of porous silicon nanoparticles (pSiNP, ~200 nm).

Nanoparticle Uptake in Plants: Gold Nanomaterial Localized in Roots of Arabidopsis thaliana by X-ray Computed Nanotomography and Hyperspectral Imaging.

Terrestrial plants can internalize and translocate nanoparticles (NPs). However, direct evidence for the processes driving the NP uptake and distribution in plants is scarce at the cellular level. Here, NP-root interactions were investigated after 10 days of exposure of Arabidopsis thaliana to 10 mg·L of negatively or positively charged gold NPs (∼12 nm) in gels.

Dynamic Nuclear Polarization NMR as a new tool to investigate the nature of organic compounds occluded in plant silica particles.

The determination of the chemical nature of the organic matter associated with phytoliths remains a challenge. This difficulty mainly stems from amounts of organic carbon (C) that are often well below the detection limit of traditional spectroscopic tools. Conventional solid-state C Nuclear Magnetic Resonance (NMR) is widely used to examine the nature and structure of organic molecules, but its inherent low sensitivity prohibits the observation of diluted samples.

Remote Biodegradation of Ge-Imogolite Nanotubes Controlled by the Iron Homeostasis of Pseudomonas brassicacearum.

The toxicity of high-aspect-ratio nanomaterials (HARNs) is often associated with oxidative stress. The essential nutrient Fe may also be responsible of oxidative stress through the production of reactive oxygen species. In the present study, it has been examined to what extent adding Fenton reaction promoting Fe impacted the toxicity of an alumino-germanate model HARN.

Involvement of nitrogen functional groups in high-affinity copper binding in tomato and wheat root apoplasts: spectroscopic and thermodynamic evidence.

Carboxylic groups located in plant cell walls (CW) are generally considered to be the main copper binding sites in plant roots, despite the presence of other functional groups. The aim of this study was to investigate sites responsible for copper binding in root apoplasts, i.e.

An adaptable mesocosm platform for performing integrated assessments of nanomaterial risk in complex environmental systems.

Physical-chemists, (micro)biologists, and ecologists need to conduct meaningful experiments to study the environmental risk of engineered nanomaterials with access to relevant mechanistic data across several spatial and temporal scales. Indoor aquatic mesocosms (60L) that can be tailored to virtually mimic any ecosystem appear as a particularly well-suited device. Here, this concept is illustrated by a pilot study aimed at assessing the distribution of a CeO₂-based nanomaterial within our system at low concentration (1.

Transformation of pristine and citrate-functionalized CeO2 nanoparticles in a laboratory-scale activated sludge reactor.

Engineered nanomaterials (ENMs) are used to enhance the properties of many manufactured products and technologies. Increased use of ENMs will inevitably lead to their release into the environment. An important route of exposure is through the waste stream, where ENMs will enter wastewater treatment plants (WWTPs), undergo transformations, and be discharged with treated effluent or biosolids.

Long-term aging of a CeO(2) based nanocomposite used for wood protection.

A multi-scale methodology was used to characterize the long-term behavior and chemical stability of a CeO2-based nanocomposite used as UV filter in wood stains. ATR-FTIR and (13)C NMR demonstrated that the citrate coated chelates with Ce(IV) through its central carboxyl- and its α-hydroxyl- groups at the surface of the unaged nanocomposite. After 42 days under artificial daylight, the citrate completely disappeared and small amount of degradation products remained attached to the surface even after 112 days.

Inhibition of sulfate reducing bacteria in aquifer sediment by iron nanoparticles.

Batch microcosms were setup to determine the impact of different sized zero valent iron (Fe(0)) particles on microbial sulfate reduction during the in situ bio-precipitation of metals. The microcosms were constructed with aquifer sediment and groundwater from a low pH (3.1), heavy-metal contaminated aquifer.

Influence of the length of imogolite-like nanotubes on their cytotoxicity and genotoxicity toward human dermal cells.

Physical-chemical parameters such as purity, structure, chemistry, length, and aspect ratio of nanoparticles (NPs) are linked to their toxicity. Here, synthetic imogolite-like nanotubes with a set chemical composition but various sizes and shapes were used as models to investigate the influence of these physical parameters on the cyto- and genotoxicity and cellular uptake of NPs. The NPs were characterized using X-ray diffraction (XRD), small angle X-ray scattering (SAXS), and atomic force microscopy (AFM).

Is there a Trojan-horse effect during magnetic nanoparticles and metalloid cocontamination of human dermal fibroblasts?

This study investigates the issue of nanoparticles/pollutants cocontamination. By combining viability assays, physicochemical and structural analysis (to probe the As speciation and valence), we assessed how γFe(2)O(3) nanoparticles can affect the cytotoxicity, the intra- and extracellular speciation of As(III). Human dermal fibroblasts were contaminated with γFe(2)O(3) nanoparticles and As(III) considering two scenarios: (i) a simultaneous coinjection of the nanoparticles and As, and (ii) an injection of the nanoparticles after 24 h of As adsorption in water.

Polyaluminum chloride with high Al30 content as removal agent for arsenic-contaminated well water.

Polyaluminum chloride (PACl) is a well-established coagulant in water treatment with high removal efficiency for arsenic. A high content of Al(30) nanoclusters in PACl improves the removal efficiency over broader dosage and pH range. In this study we tested PACl with 75% Al(30) nanoclusters (PACl(Al30)) for the treatment of arsenic-contaminated well water by laboratory batch experiments and field application in the geothermal area of Chalkidiki, Greece, and in the Pannonian Basin, Romania.

Analysis of engineered nanomaterials in complex matrices (environment and biota): general considerations and conceptual case studies.

Advances in the study of the environmental fate, transport, and ecotoxicological effects of engineered nanomaterials (ENMs) have been hampered by a lack of adequate techniques for the detection and quantification of ENMs at environmentally relevant concentrations in complex media. Analysis of ENMs differs from traditional chemical analysis because both chemical and physical forms must be considered. Because ENMs are present as colloidal systems, their physicochemical properties are dependent on their surroundings.

Synthesis of Ge-imogolite: influence of the hydrolysis ratio on the structure of the nanotubes.

The synthesis protocol for Ge-imogolite (aluminogermanate nanotubes) consists of 3 main steps: base hydrolysis of a solution of aluminum and germanium monomers, stabilization of the suspension and heating at 95 °C. The successful synthesis of these nanotubes was found to be sensitive to the hydrolysis step. The impact of the hydrolysis ratio (from n(OH)/n(Al) = 0.

TiO₂-based nanoparticles released in water from commercialized sunscreens in a life-cycle perspective: structures and quantities.

This work investigates the physical-chemical evolution during artificial aging in water of four commercialized sunscreens containing TiO₂-based nanocomposites. Sunscreens were analyzed in terms of mineralogy and TiO₂ concentration. The residues formed after aging were characterized in size, shape, chemistry and surface properties.

Growth kinetic of single and double-walled aluminogermanate imogolite-like nanotubes: an experimental and modeling approach.

Atomic Force Microscopy (AFM) and in situ Small Angle X-ray Scattering (SAXS) were used to investigate the evolution of the aluminogermanate imogolite-like nanotubes concentration and morphology during their synthesis. In particular, in situ SAXS allowed quantifying the transformation of protoimogolite into nanotubes. The size distribution of the final nanotubes was also assessed after growth by AFM.

Investigation of copper speciation in pig slurry by a multitechnique approach.

It is now well-known that copper (Cu) can accumulate on the surface of soils upon which pig slurry has been applied. This is due to the high quantity of Cu in pig slurry resulting from its use as a growth promoter in animal feeds. The mobility and bioavailability of Cu from pig slurry spreading can be better predicted by determining the speciation of this element in addition to its total concentration.

Structural degradation at the surface of a TiO(2)-based nanomaterial used in cosmetics.

A number of commercialized nanomaterials incorporate TiO(2) nanoparticles. Studying their structural stability in media mimicking the environment or the conditions of use is crucial in understanding their potential eco-toxicological effects. We focused here on a hydrophobic TiO(2) nanoparticle-based formulation used in cosmetics: T-Lite SF.

Combining size fractionation, scanning electron microscopy, and X-ray absorption spectroscopy to probe zinc speciation in pig slurry.

Zinc occurs in high quantity in pig slurry since it is used as an essential micronutrient at high concentrations in animal feeds despite the low Zn assimilation by pigs. Zinc accumulation was measured in soil surface layers that had been amended with pig slurry, while also determining the phytotoxicity as well as the extent of groundwater quality degradation. To accurately predict the mobility and bioavailability of Zn derived from pig slurry spreading, the speciation of this element has to be assessed since the total concentration is not sufficient.

Evidence of double-walled Al-Ge imogolite-like nanotubes. a cryo-TEM and SAXS investigation.

It has been recently discovered that the synthesis of Al-Ge imogolite-like nanotubes is possible at high concentration. Despite this initial success, the structure of these Al-Ge imogolite-like nanotubes remains not completely understood. Using high resolution cryo-TEM and Small Angle X-ray Scattering, we unravel their mesoscale structure in two contrasted situations.