Spreading of aqueous surfactant solutions on oil substrates: Superspreaders vs non-superspreaders.

Hypothesis: The question of why aqueous solutions of some surfactants demonstrate a rapid spreading (superspreading) over hydrophobic solid substrates, while solutions of other similar surfactants do not, has no definitive explanation despite numerous previous studies. The suggested hypothesis for this study assumes that once the spreading coefficient of surfactant is positive, there is a concentration range for solutions of any surfactant which demonstrates rapid spreading. As it is impossible to calculate spreading coefficients for solid substrates, we compare the spreading performance of known superspreaders and non-superspreaders on liquid (oil) substrate.

A guide to designing graphene-philic surfactants.

Hypothesis: As compared to common aliphatic surfactants, increasing the number of pendant or incorporated aromatic groups in a surfactant is expected to offer significant enhancement in the affinity for graphene surfaces. The basis for enhanced graphene-philicity of aromatic surfactants is that they can develop appreciable π - π interactions with graphene. Furthermore, charged (anionic) surfactants are expected to confer electrostatic stabilization on surfactant-graphene composites.

Fabrication and application of composite adsorbents made by one-pot electrochemical exfoliation of graphite in surfactant ionic liquid/nanocellulose mixtures.

Previously, surfactant-assisted exfoliated graphene oxide (sEGO) formed with the triple-chain surfactant TC14 (sodium 1,4-bis(neopentyloxy)-3-(neopentylcarbonyl)-1,4-dioxobutane-2-sulfonate) was applied in wastewater treatment. The extent of dye-removal and the adsorption capacity of the sEGO formed with this triple-chain surfactant outperformed those of two other systems, namely, the di-chain version of TC14 (AOT14; sodium 1,2-bis-(2,2-dimethyl-propoxycarbonyl)-ethanesulfonate) and the single-chain surfactant sodium -dodecylsulfate. In the present study, to further optimise the surfactant chemical structure, the sodium ion of TC14 was substituted with 1-butyl-3-methyl-imidazolium (BMIM) generating surfactant ionic liquids (SAILs; 1-butyl-3-imidazolium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulfonate), hereafter denoted as BMIM-TC14.

Design of Surfactant Tails for Effective Surface Tension Reduction and Micellization in Water and/or Supercritical CO.

The interfacial properties and water-in-CO (W/CO) microemulsion (μE) formation with double- and novel triple-tail surfactants bearing trimethylsilyl (TMS) groups in the tails are investigated. Comparisons of these properties are made with those for analogous hydrocarbon (HC) and fluorocarbon (FC) tail surfactants. Surface tension measurements allowed for critical micelle concentrations (CMC) and surface tensions at the CMC (γ) to be determined, resulting in the following trend in surface activity FC > TMS > HC.

Water-in-CO Microemulsions Stabilized by an Efficient Catanionic Surfactant.

To facilitate potential applications of water-in-supercritical CO microemulsions (W/CO μEs) efficient and environmentally responsible surfactants are required with low levels of fluorination. As well as being able to stabilize water-CO interfaces, these surfactants must also be economical, prevent bioaccumulation and strong adhesion, deactivation of enzymes, and be tolerant to high salt environments. Recently, an ion paired catanionic surfactant with environmentally acceptable fluorinated C tails was found to be very effective at stabilizing W/CO μEs with high water-to-surfactant molar ratios () up to ∼50 (Sagisaka, M.

Highly branched triple-chain surfactant-mediated electrochemical exfoliation of graphite to obtain graphene oxide: colloidal behaviour and application in water treatment.

The generation of surfactant-assisted exfoliated graphene oxide (sEGO) by electrochemical exfoliation is influenced by the presence of surfactants, and in particular the hydrophobic tail molecular-architecture. Increasing surfactant chain branching may improve the affinity for the graphite surfaces to provide enhanced intersheet separation and stabilisation of exfoliated sheets. The resulting sEGO composites can be readily used to remove of a model pollutant, the dye, methylene blue (MB), from aqueous solutions by providing abundant sites for dye adsorption.

Electrochemical exfoliation of graphite in nanofibrillated kenaf cellulose (NFC)/surfactant mixture for the development of conductive paper.

The effect of incorporating common dodecyl anionic and cationic surfactants such as dodecyltrimethylammonium bromide (DTAB), dodecylethyldimethylammonium bromide (DDAB), and sodium dodecylsulfate (SDS) in nanocomposites of reduced graphene oxide and nanocellulose are described. The stabilization and electrical properties of the nanocomoposites of reduced graphene oxide (RGO) and nanofibrillated kenaf cellulose (NFC) were characterized using four-point probe electrical conductivity measurements. Raman spectroscopy, field emission scanning electron microscopy, and high-resolution transmission electron microscopy were used to investigate dispersion morphology and the quality of RGO inside the NFC matrices.

Linear symmetric liquid crystal trimers exhibiting supramolecular chiral architectures.

We prepared a homologous series of achiral liquid crystal trimers (I-n) in which two phenylpyrimidine units and one biphenyl unit were connected via flexible spacers, and investigated the physical properties. All the trimers possessing odd-numbered methylene spacers exhibited soft crystalline chiral conglomerate phases. X-ray diffraction measurements reveal that they have an intercalated layer structure.

Surfactants with aromatic headgroups for optimizing properties of graphene/natural rubber latex composites (NRL): Surfactants with aromatic amine polar heads.

Hypothesis: The compatibility of surfactants and graphene surfaces can be improved by increasing the number of aromatic groups in the surfactants. Including aniline in the structure may improve the compatibility between surfactant and graphene further still. Surfactants can be modified by incorporating aromatic groups in the hydrophobic chains or hydrophilic headgroups.

Water-in-CO Microemulsions Stabilized by Fluorinated Cation-Anion Surfactant Pairs.

High-water-content water-in-supercritical CO (W/CO) microemulsions are considered to be green, universal solvents, having both polar and nonpolar domains. Unfortunately, these systems generally require environmentally unacceptable stabilizers like long and/or multifluorocarbon-tail surfactants. Here, a series of catanionic surfactants having more environmentally friendly fluorinated C-C tails have been studied in terms of interfacial properties, aggregation behavior, and solubilizing power in water and/or CO.

Preparation of conductive cellulose paper through electrochemical exfoliation of graphite: The role of anionic surfactant ionic liquids as exfoliating and stabilizing agents.

A facile electrochemical exfoliation method was established to efficiently prepare conductive paper containing reduced graphene oxide (RGO) with the help of single chain anionic surfactant ionic liquids (SAILs). The surfactant ionic liquids are synthesized from conventional organic surfactant anions and a 1-butyl-3-methyl-imidazolium cation. For the first time the combination of SAILs and cellulose was used to directly exfoliate graphite.

Rational design of aromatic surfactants for graphene/natural rubber latex nanocomposites with enhanced electrical conductivity.

Hypothesis: Graphene nanoplatelets (GNPs) can be dispersed in natural rubber matrices using surfactants. The stability and properties of these composites can be optimized by the choice of surfactants employed as stabilizers. Surfactants can be designed and synthesized to have enhanced compatibility with GNPs as compared to commercially available common surfactants.

Anisotropic reversed micelles with fluorocarbon-hydrocarbon hybrid surfactants in supercritical CO.

Previous work (M. Sagisaka, et al. Langmuir 31 (2015) 7479-7487), showed the most effective fluorocarbon (FC) and hydrocarbon (HC) chain lengths in the hybrid surfactants FCm-HCn (sodium 1-oxo-1-[4-(perfluoroalkyl)phenyl]alkane-2-sulfonates, where m = FC length and n = HC length) were m and n = 6 and 4 for water solubilization, whereas m 6 and n 6, or m 6 and n 5, were optimal chain lengths for reversed micelle elongation in supercritical CO.

Trimethylsilyl hedgehogs - a novel class of super-efficient hydrocarbon surfactants.

Presented here are the results for a novel class of hydrocarbon surfactants, termed trimethylsilyl hedgehogs (TMS-hedgehogs), due to the presence of silicon in the tails. By comparing the surface properties of these hybrid hedgehogs to purely hydrocarbon equivalents, links between performance and the structure are made. Namely, by controlling the molecular volume of the surfactant fragments, improvements can be made in surface coverage, generating lower surface energy monolayers.

Purification and characterization of a novel extracellular neutral metalloprotease from Cerrena albocinnamomea.

We selected a fungus secreting a neutral protease from soil and identified it as the basidiomycete fungus Cerrena albocinnamomea according to its ITS-5.8S rDNA and 28S rDNA-D1/D2 sequences. A major extracellular protease isolated from C.

New Class of Amphiphiles Designed for Use in Water-in-Supercritical CO Microemulsions.

Water-in-supercritical CO microemulsions formed using the hybrid F-H surfactant sodium 1-oxo-1-[4-(perfluorohexyl)phenyl]hexane-2-sulfonate, FC6-HC4, have recently been shown to have the highest water-solubilizing power ever reported. FC6-HC4 demonstrated the ability to outperform not only other surfactants but also other FCm-HCn analogues containing different fluorocarbon and hydrocarbon chain lengths (Sagisaka, M. et al.

Graphene-philic surfactants for nanocomposites in latex technology.

Graphene is the newest member of the carbon family, and has revolutionized materials science especially in the field of polymer nanocomposites. However, agglomeration and uniform dispersion remains an Achilles' heel (even an elephant in the room), hampering the optimization of this material for practical applications. Chemical functionalization of graphene can overcome these hurdles but is often rather disruptive to the extended pi-conjugation, altering the desired physical and electronic properties.

Shape Modification of Water-in-CO2 Microemulsion Droplets through Mixing of Hydrocarbon and Fluorocarbon Amphiphiles.

An oxygen-rich hydrocarbon (HC) amphiphile has been developed as an additive for supercritical CO2 (scCO2). The effects of this custom-designed amphiphile have been studied in water-in-CO2 (w/c) microemulsions stabilized by analogous fluorocarbon (FC) surfactants, nFG(EO)2, which are known to form spherical w/c microemulsion droplets. By applying contrast-variation small-angle neutron scattering (CV-SANS), evidence has been obtained for anisotropic structures in the mixed systems.

Periodic Formation/Breakdown of Lamellar Aggregates with Anionic Cyanobiphenyl Surfactants.

This study reports unusual behavior of aqueous-phase lamellar aggregates with a new class of hybrid surfactant, CB-B2ES, having mesogenic units {6-[4-(4-cyanophenyl)phenyloxy]hexyl} and temperature-sensitive oxyethylated (butoxyethoxyethyl) tails. These tails are poorly miscible and likely to microsegregate if the surfactant molecules assemble. Lamellar aggregates appear at CB-B2ES concentrations higher than 5 wt % and were found to undergo repeat formation/breakdown periodically at 30 °C, with an average domain lifetime of ∼10 s.

Effect of Fluorocarbon and Hydrocarbon Chain Lengths in Hybrid Surfactants for Supercritical CO2.

Hybrid surfactants containing both fluorocarbon (FC) and hydrocarbon (HC) chains have recently been shown to solubilize water and form elongated reversed micelles in supercritical CO2. To clarify the most effective FC and HC chain lengths, the aggregation behavior and interfacial properties of hybrid surfactants FCm-HCn (FC length m/HC length n = 4/2, 4/4, 6/2, 6/4, 6/5, 6/6, and 6/8) were examined in W/CO2 mixtures as functions of pressure, temperature, and water-to-surfactant molar ratio (W0). The solubilizing power of hybrid surfactants for W/CO2 microemulsions was strongly affected by not only the FC length but also by that of the HC.

Enhanced dispersion of multiwall carbon nanotubes in natural rubber latex nanocomposites by surfactants bearing phenyl groups.

Here is presented a systematic study of the dispersibility of multiwall carbon nanotubes (MWCNTs) in natural rubber latex (NR-latex) assisted by a series of single-, double-, and triple-sulfosuccinate anionic surfactants containing phenyl ring moieties. Optical polarising microscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Raman spectroscopy have been performed to obtain the dispersion-level profiles of the MWCNTs in the nanocomposites. Interestingly, a triple-chain, phenyl-containing surfactant, namely sodium 1,5-dioxo-1,5-bis(3-phenylpropoxy)-3-((3-phenylpropoxy)carbonyl) pentane-2-sulfonate (TCPh), has a greater capacity the stabilisation of MWCNTs than a commercially available single-chain sodium dodecylbenzenesulfonate (SDBS) surfactant.

Properties of surfactant films in water-in-CO2 microemulsions obtained by small-angle neutron scattering.

Hypothesis: The formation, stability and structural properties of normal liquid phase microemulsions, stabilized by hydrocarbon surfactants, comprising water and hydrocarbon oils can be interpreted in terms of the film bending rigidity (energy) model. Here, this model is tested for unusual water-in-CO2 (w/c) microemulsions, formed at high pressure with supercritical CO2 (sc-CO2) as a solvent and fluorinated surfactants as stabilizers. Hence, it is possible to explore the generality of this model for other types of microemulsions.

Hyperbranched hydrocarbon surfactants give fluorocarbon-like low surface energies.

Two series of Aerosol-OT-analogue surfactants (sulfosuccinate-type di-BCnSS and sulfoglutarate-type di-BCnSG) with hyperbranched alkyl double tails (so-called "hedgehog" groups, carbon number n = 6, 9, 12, and 18) have been synthesized and shown to demonstrate interfacial properties comparable to those seen for related fluorocarbon (FC) systems. Critical micelle concentration (CMC), surface tension at the CMC (γCMC), and minimum area per molecule (Amin) were obtained from surface tension measurements of aqueous surfactant solutions. The results were examined for relationships between the structure of the hedgehog group and packing density at the interface.

Synthesis and anticancer properties of phenyl benzoate derivatives possessing a terminal hydroxyl group.

To assess the cytotoxic effects on A549 human lung cancer cells, we investigated a liquid-crystalline compound possessing a terminal hydroxyl group at concentrations of 0.1-20 μM. The compound, 4-butylphenyl 4-(6-hydroxyhexyloxy)benzoate (2), showed marked cell-growth inhibition at concentrations higher than 5 μM.

Low-surface energy surfactants with branched hydrocarbon architectures.

Surface tensiometry and small-angle neutron scattering have been used to characterize a new class of low-surface energy surfactants (LSESs), "hedgehog" surfactants. These surfactants are based on highly branched hydrocarbon (HC) chains as replacements for environmentally hazardous fluorocarbon surfactants and polymers. Tensiometric analyses indicate that a subtle structural modification in the tails and headgroup results in significant effects on limiting surface tensions γcmc at the critical micelle concentration: a higher level of branching and an increased counterion size promote an effective reduction of surface tension to low values for HC surfactants (γcmc ∼ 24 mN m(-1)).