Installation of superacidic carbon acid moieties into polymer materials post-polymerization modification.

In the fields of polymer and material chemistries, strong acid units have mainly included sulfonic acids, which has limited the extension of related material chemistries. Here, a unique carbon acid functionality, namely the bis[(trifluoromethyl)sulfonyl]methyl group, was integrated with polymers a simple postpolymerization modification with the outstandingly electrophilic 1,1-bis[(trifluoromethyl)sulfonyl]ethylene. The proposed synthesis protocol was verified as an efficient process even for solid-state reactions.

Development of a Simplified Radiation-Induced Emulsion Graft Polymerization Method and Its Application to the Fabrication of a Heavy Metal Adsorbent.

A simplified radiation-induced emulsion graft polymerization (SREG) method is proposed. This method involves a convenient and easy degassing process of a monomer solution using a commercially available sealed glass jar. A loaded weight on the lid of the jar was used to control the jar's internal pressure as the degassing of the monomer solution took place using a vacuum pump.

Surface Engineering of Fluoropolymer Films via the Attachment of Crown Ether Derivatives Based on the Combination of Radiation-Induced Graft Polymerization and the Kabachnik-Fields Reaction.

In this manuscript, we present the successful attachment of crown ether moieties onto fluoropolymer surfaces, via the combination of radiation-induced graft polymerization and a subsequent surface Kabachnik-Fields three-component reaction. The obtained crown ether-tethered fluoropolymer films exhibited an ammonium cation capturing ability, owing to the host-guest interactions (i.e.

Fabrication of Thermoresponsive Nanoactinia Tentacles by a Single Particle Nanofabrication Technique.

Nanowires that are retractable by external stimulus are the key to fabrication of nanomachines that mimick actinia tentacles in nature. A single particle nanofabrication technique (SPNT) was applied over a large area to the fabrication of retractable nanowires (nanoactinia tentacles) composed of poly(N-isopropylacrylamide) (PNIPAM) and poly(vinylpyrrolidone) (PVP), which are thermoresponsive and hydrophilic polymers. The nanowires were transformed with increasing temperature from rod-like- to globule-forms with gyration radii of ∼1.

Fabrication of enzyme-degradable and size-controlled protein nanowires using single particle nano-fabrication technique.

Protein nanowires exhibiting specific biological activities hold promise for interacting with living cells and controlling and predicting biological responses such as apoptosis, endocytosis and cell adhesion. Here we report the result of the interaction of a single high-energy charged particle with protein molecules, giving size-controlled protein nanowires with an ultra-high aspect ratio of over 1,000. Degradation of the human serum albumin nanowires was examined using trypsin.

Visualization of focused proton beam dose distribution by atomic force microscopy using blended polymer films based on polyacrylic acid.

A simple and sensitive sub-micrometer scale method for visualization of the dose distribution of a focused proton beam (FPB) was developed, taking advantage of the formation of a bulky crosslinked structure induced by FPB irradiation of a common polymer and cross-linker, polyacrylic acid-N, N'-methylene bisacrylamide, blend film surface. The irradiated part of the film swelled as a peak, and the height of swelling increased with increasing FPB fluence. The film was used as a proton beam-sensitive polymer film by analysis of the irradiated film surface using atomic force microscopy.

Temperature-responsive one-dimensional nanogels formed by the cross-linker-aided single particle nanofabrication technique.

A single particle nanofabrication technique was successfully applied to the fabrication of homogeneous poly(N-isopropylacrylamide) (PNIPAAm) 1D nanogels over a large area, using N,N'-methylene-bis-acrylamide (MBAAm) as a cross-linker. The PNIPAAm 1D nanogels with high aspect ratio over 130 were formed uniformly on the substrate, and the mechanical strength and the length of the 1D nanogels can be easily controlled by adjusting the MBAAm content. The 1D nanogels were transformed from the non-aggregated to aggregated forms over a lower critical solution temperature (LCST) of approximately 32 °C in water.

Fullerene nanowires as a versatile platform for organic electronics.

The development of organic semiconducting nanowires that act as charge carrier transport pathways in flexible and lightweight nanoelectronics is a major scientific challenge. We report on the fabrication of fullerene nanowires that is universally applicable to its derivatives (pristine C(60), methanofullerenes of C(61) and C(71), and indene C(60) bis-adduct), realized by the single particle nanofabrication technique (SPNT). Nanowires with radii of 8-11 nm were formed via a chain polymerization reaction induced by a high-energy ion beam.

Improvement of blood compatibility on polysulfone-polyvinylpyrrolidone blend films as a model membrane of dialyzer by physical adsorption of recombinant soluble human thrombomodulin (ART-123).

ART-123 is a recombinant soluble human thrombomodulin (hTM) with potent anticoagulant activity, and is available for developing antithrombogenic surfaces by immobilization. We focused on improving blood compatibility on the dialyzer surface by the physical adsorption of ART-123 as a safe yet simple method without using chemical reagents. The physical adsorption mechanism and anticoagulant activities of adsorbed hTM on the surface of a polysulfone (PSF) membrane containing polyvinylpyrrolidone (PVP) as a model dialyzer were investigated in detail.

Enhancement of the blood compatibility of dialyzer membranes by the physical adsorption of human thrombomodulin (ART-123).

ART-123 is a recombinant soluble human thrombomodulin (hTM) with excellent anticoagulant activity. We focused on improving the blood compatibility of the polysulfone-polyvinylpyrrolidone dialyzer surface by the physical adsorption of ART-123 onto the surface. The blood compatibility of the dialyzer with the hTM adsorbed membrane was evaluated by measuring the differential pressure between the arterial and the venous pressures and by blood parameters during blood circulation.

Protein nanoarrays on a highly-oriented lamellar surface.

Well-aligned nanopatterns of various serum, antithrombogenic and cell adhesive proteins, such as gamma-globulin, fibrinogen, thrombomodulin, fibronectin and type I collagen, were fabricated on a highly-oriented block copolymer lamellar surface, and these bioactive protein nanoarrays will be useful in biological research.

Physical adsorption of human thrombomodulin (ART-123) onto polymeric biomaterials for developing an antithrombogenic blood-contacting material.

Human thrombomodulin (hTM) is an endothelial cell-associated protein with potent natural anticoagulant activity by converting thrombin from a procoagulant protease to an anticoagulant. ART-123 is a recombinant soluble hTM (amino acid residues 1-498), and we focused on the physical adsorption of ART-123 onto a polymeric biomaterial surface to develop an antithrombogenic blood-contacting material with preventing the denaturation of hTM and the remaining chemical reagents. The adsorption of hTM onto polysulfone (PSF) films was analyzed quantitatively by quartz crystal microbalance analysis.